Toro Timemaster - Turfmaster Transmission
Vložit
- čas přidán 8. 07. 2024
- #billygoatlawanservice #timemaster
Replacing the original (Residential) Toro Timemaster transmission with a (Commerical) Toro Turfmaster transmission.
Part # 131-9667
Please subscribe, like and/or comment to support our channel.
Want us to review or demo your product(s), go to our "About" tab for our current contact information - Krátké a kreslené filmy
Bill I must say you have conquered the Time Master 💪🏽I'm going to call your mower the "Bill Master"💯✔️🤣
Lol Renaldo
@@MyGreenLawn2019 🤣
Thanks! I definitely have a love-hate relationship with the timemasters.
@@BillyGoatLawnService Hehe💯💪🏽
I have a Time Master, and I'm not sure if the transmission is going bad or not but I'm used to the 22 inch personal Pace mowers where as soon as you push on it it takes off fast whereas my Time Master there seems to be a delay and I almost have to push it sometimes. I know how to adjust the cable, I adjusted it so much that it broke the plastic piece off
From what you’re subscribing, the transmission is going bad. I tried everything to prolong the life of the transmission but within a week I start to notice the lack of power. Replacing the transmission every month can get quite expensive. Toro really needs to look into re-engineer the self propel system.
Same issue
Now, we all need to get a hydro drive swapped in these to really make them right
Now this is a good breakdown video! I just subscribed and look forward to this channel!
Thanks for subscribing! Appreciate the support!
Love your videos
Appreciate the comment!
Love the video. Since I own 2 of these this is great information thanks for sharing
Thanks for commenting! More timemaster videos are coming!
@@BillyGoatLawnService sweet
Great video!!
That's The New Transmission On The Toro Mower Billy Good 👍🏽
Thanks for commenting! Appreciate your support!
You Welcome
Thanks nice man
Thanks for supporting our channel!
Bill. I’m getting a noise when the back wheels are moving. Any possibility of it being something with the wheel. Or is it all connected to the transmission? “Clean cuts”
My first guess would be the center support bearing next to the transmission is bad. To check apply wd40 around the bearing and see if the noise goes away.
QUESTION: curious - what is the cable /hose piece that comes out of a black box and into the discharge side of your mower? Looks to be some aftermarket piece. Thanks!
That is a DIY chute blocker I installed. Here is a link to that video. czcams.com/video/oT9pbeZAIlE/video.html
@@BillyGoatLawnService Thank you!
Have you noticed a difference in the differential getting you better traction? I had the idea of this after purchasing a time master over the turfmaster due to it being lighter for my wife to handle on hilly yards. The problem we have with the time master is the differential being too loose. One wheel will spin like crazy and it’s borderline dangerous. My exmark commercial 21 had no problem with the differential getting traction. So I was curious about doing this same thing you did here hoping the commercial grade unit would have that better diff. So have you noticed a difference in that yourself, do you happen to face the same problems as us? Thanks for posting
I found using a turf master version transmission has no difference in performance on the time master. One wheel will spin on hills.
Quick question. I’m having a hard time turning seems like the rear wheels lock every time I need to turn. I also started hearing a grinding noise when I move the mower while is off. Would that be my transmission starting to go bad?
My first thought is your center support transmission shaft bearing is seizing up. Spray wd40 on both sides of the bearing and see if that helps.
@@BillyGoatLawnService I just did headed to work hopefully that helps thank you
I’m gonna go with the smaller gear ratio is turning the transmission harder and making it get hotter nothing to do with the pulley material type lol. See the diameter of the big pulley changes the gear ratio of how hard your turning the gears inside, so the commercial one your turning it way less so more torque, less heat, and also makes it slower 😊
Why does this sound so familiar lol
The larger pully of the turfmaster makes the run speed slower. I believe the turf master pto shaft pully is larger. The transmissions are basically just a 2 cone gears that push a center gear
I learned the hard way that the larger pulley makes the mower speed slower.
I wonder how the variable speed works inside the transmission. I guess something slips so they are made to wear out over time as mine did.
At some point, I will take apart a transmission and post a video.
The Exmark 30in's transmission looks very beefy and also has a fan on top of the pulley. It costs over $400 though. It might fit since that mower is built similarly to the turf master.
I would love to install a Exmark transmission but not willing to spend $400 if it doesn’t fit. I’m not sure but I think the Exmark frame is modified for the beefy transmission.
My Toro timemaster squeals when I engage pace propel
Haha plus Michelle only needs alittle 2,4, D and a kohler engine swap and she wud run the streets on that thing man! Lol
Where did you get the pulley from ? My plastic pulley just broke! Thanks in advance
That metal pulley actually came from a craftsman 28 pro series lawn mower. They use the same transmissions but use different pulleys.
Thank you I’ll look for it !
I have bought 3 new transmission and all of them I can not get the left wheel to keep of with the right wheel and it won’t go up hills. Am I missing anything?
Possibly the drive cable isn’t engaged fully. Check out this video if you haven’t seen it. czcams.com/video/vH6jJYNIiz4/video.htmlsi=SK84_XEJ45ZkPent
I swear I think the transmission on the new ones is limited slip like a car, cause I got a brand spanking new time waster and was sadly having to use it on a hilll the other day sloping like almost a cliff basically to the left, and the mower was slipping the right rear wheel and it stops pulling on a hill unless that right rear tire has traction. Which would mean is sorta a one wheel wonder mower on hills so the right rear is the main drive wheel
What’s the pulley part number that you ended up going with?
I ended up using the metal pulley part #15086 but I think the plastic pulley performs just as good.
Does bigger pulley mean larger drive belt and if yes what size? No fitting issues with that large pulley over the standard one? Yea, I would like to at least see the finished product and how it fits. More torque but less speed? Same transmission just larger pulley and that's it?
You are correct! The bigger pulley has more torque but less speed. Fits perfectly but have to use the turfmaster belt 116-7116.
Thanks
I just put the second one in mine
How long did your first transmission last? Do you have an hour meter on your Timemaster?
@@BillyGoatLawnService actually this is the 2nd replacement. I do not have an hour meter but the original lasted a full season of heavy use. The 1st replacement lasted a full season as well though it was not used nearly as much and the shaft or axle broke in half. I have a new carrier bearing ordered because that is where it broke at.
Did you see the speed go up?
Surprisingly the turfmaster transmission is slower than the timemaster transmission.
@@BillyGoatLawnService significantly slower?
Don't you need a bigger belt
Yes you will need to use the bigger belt if you use the bigger pulley. In this video I used the original smaller belt since I installed the smaller pulley.
Almost had some thoughts, but settle on the conclusion that the bigger metal pulley makes it run cooler?
Did you even bother to crack it open to realize that the other gears may also be different ratios? Same motor RPM? I mean what are we talking about here? You are so simple it makes my head hurt waiting for you to kludge your way to the obvious.
These are just words you've strung together like some sh!tty version of AI
Thanks for commenting! After all this useless information, I needed up going back with the original transmission with the plastic pulley. The only thing I do know, all these transmissions are junk. I did crack them open and noticed no difference with the gears inside the casing. Only difference is the pulleys.