Video není dostupné.
Omlouváme se.
How to make faux leather earrings with tips and tricks to apply heat transfer vinyl
Vložit
- čas přidán 14. 08. 2024
- When I originally posted it, there were some technical issues with the upload so I've re-loaded it.
In this video, I share how to make faux leather earrings with a Cricut machine. It is easy to cut faux leather with a Cricut Maker and Cricut Explore Air. While you can normally cut faux leather with the normal fine tip blade, I show how to cut two types of double sided faux leather. One requires the normal fine tip blade and the other requires the deep cut blade.
I share tips and tricks for applying heat transfer vinyl to faux leather. I give some tips and things to be aware of to prevent melting the faux leather. I also share some tips for how to apply the HTV without the carrier sheet showing (indentations in the faux leather).
At the end of the meeting I also share how to assemble the faux leather earrings. DIY earrings are easy to make and make great DIY gifts. If you like DIY jewelry and are looking for a Cricut Christmas project, give this snowflake earrings diy a try.
In the video I referenced and showed how to use several items. I'll link to these items below. These links are affiliate links which means I may receive a small commission for items purchased from the links.
Black and white buffalo check double-sided faux leather: tidd.ly/3maZvBc
Red double-sided faux leather: tidd.ly/3gAnf0w
Light Pad: amzn.to/3nkhjeD
My Cricut Cart (Love this!): amzn.to/2KbFhdl
Bulk role of transfer tape: amzn.to/31WluUy
Cricut Brayer: amzn.to/2TqWLDr
Purple strong grip mat: amzn.to/3mec9ja
Green standard grip mats: amzn.to/2R3TdqW
Leather Punch (smaller holes): amzn.to/2G68uRu
Leather Punch (bigger holes): amzn.to/2Icmw56
Earring making kit: amzn.to/2R8xgXQ
Cricut Air: amzn.to/2G8L2n2
Cricut Maker: amzn.to/30EDce5
Strong Grip Transfer Tape: amzn.to/2xJu3qu
Standard Grip Transfer Tape: amzn.to/2KhVeLO
Leather Smoother (edges): amzn.to/2tlDBWQ
Toothpicks for leather smoother: amzn.to/3bCmUaV
Deep Cut Blade: amzn.to/2tsCpRw
Cricut deep cut blade: amzn.to/2R4fh4I
Leather Scissors: amzn.to/2I7iomW
Gold Hooks: amzn.to/2NJCvLn
Cricut Easy Press: amzn.to/36eWnMG
Cricut Easy Press Mini: amzn.to/2W05xtY
Cricut Easy Press Mat: amzn.to/2ufPc9O
Leather Bundle: Leather & deep cut blade - amzn.to/30CHS4a
Basic Cricut Tools: amzn.to/2FYVFIO
Earring backs: amzn.to/3apue8T
Fabric Glue: amzn.to/379bt7N
Fabric Glue #2: amzn.to/2MGnmtl
Heat n Bond: amzn.to/2Ib41OJ
Favorite Faux Leather & Leather Etsy Shops (if you want to order online):
Art of Fabric: tidd.ly/d80797e4
Pink Antler: tidd.ly/ace5c522
FrogJelly: tidd.ly/fa81d56d
Beans & Peanuts: tidd.ly/89730cfa
LBJ Jewelry Supply: tidd.ly/baf35dc8
My favorite chunky glitter shop: tidd.ly/3gncD53
Leather AA: tidd.ly/68e32c50
Great Leather Scraps:
Leather scrap kit from Amazon: amzn.to/3ankmN1
Double-sided faux leather: amzn.to/34c2Fzc
Double-sided glitter faux leather: amzn.to/2Yf8Hvl
fine glitter faux leather: amzn.to/3118qxS
Snowflake SVG file: cutcraftdiy.co...
In the video I referenced and showed how to use several items. I'll link to these items below. These links are affiliate links which means I may receive a small commission for items purchased from the links.
Black and white buffalo check double-sided faux leather: tidd.ly/3maZvBc
Red double-sided faux leather: tidd.ly/3gAnf0w
My Cricut Cart (Love this!): amzn.to/2KbFhdl
Light Pad: amzn.to/3nkhjeD
Bulk role of transfer tape: amzn.to/31WluUy
Cricut Brayer: amzn.to/2TqWLDr
Purple strong grip mat: amzn.to/3mec9ja
Green standard grip mats: amzn.to/2R3TdqW
Leather Punch (smaller holes): amzn.to/2G68uRu
Leather Punch (bigger holes): amzn.to/2Icmw56
Earring making kit: amzn.to/2R8xgXQ
Cricut Air: amzn.to/2G8L2n2
Cricut Maker: amzn.to/30EDce5
Strong Grip Transfer Tape: amzn.to/2xJu3qu
Standard Grip Transfer Tape: amzn.to/2KhVeLO
Leather Smoother (edges): amzn.to/2tlDBWQ
Toothpicks for leather smoother: amzn.to/3bCmUaV
Deep Cut Blade: amzn.to/2tsCpRw
Cricut deep cut blade: amzn.to/2R4fh4I
Leather Scissors: amzn.to/2I7iomW
Gold Hooks: amzn.to/2NJCvLn
Cricut Easy Press: amzn.to/36eWnMG
Cricut Easy Press Mini: amzn.to/2W05xtY
Cricut Easy Press Mat: amzn.to/2ufPc9O
Leather Bundle: Leather & deep cut blade - amzn.to/30CHS4a
Basic Cricut Tools: amzn.to/2FYVFIO
Earring backs: amzn.to/3apue8T
Fabric Glue: amzn.to/379bt7N
Fabric Glue #2: amzn.to/2MGnmtl
Heat n Bond: amzn.to/2Ib41OJ
Favorite Faux Leather & Leather Etsy Shops (if you want to order online):
Art of Fabric: tidd.ly/d80797e4
Pink Antler: tidd.ly/ace5c522
FrogJelly: tidd.ly/fa81d56d
Beans & Peanuts: tidd.ly/89730cfa
LBJ Jewelry Supply: tidd.ly/baf35dc8
My favorite chunky glitter shop: tidd.ly/3gncD53
Leather AA: tidd.ly/68e32c50
Great Leather Scraps:
Leather scrap kit from Amazon: amzn.to/3ankmN1
Double-sided faux leather: amzn.to/34c2Fzc
Double-sided glitter faux leather: amzn.to/2Yf8Hvl
fine glitter faux leather: amzn.to/3118qxS
Snowflake SVG file: cutcraftdiy.com/product/winter-tear-drop-earrings-bundle-18-pcs-svg-and-dxf-cut-files/?awc=6220_1607656708_ba6201d11fac5af624d830392934ac38&source=aw&
I dont mean to be so off topic but does someone know of a method to log back into an instagram account?
I somehow lost the account password. I would appreciate any tricks you can offer me.
@Lionel Markus instablaster =)
@Oliver Landry Thanks so much for your reply. I got to the site thru google and im trying it out now.
Looks like it's gonna take a while so I will get back to you later with my results.
@Oliver Landry WTF IT ACTUALLY WORKED! Just got access to my ig login after roughly 45 minutes by using the site.
I had to pay 15 $ but for sure worth the price :O
Thanks so much you saved my ass!
@Lionel Markus You are welcome xD
I don’t watch a lot of long videos, but I’m glad I watched this one. Chock full of great tips, techniques, and little details! Great job! Thank you.
We miss you so much! In my opinion, you are the very best for teaching us how to work with faux leather. We hold all close. Blessings and Re Jouir -Darlene
To avoid those lines when you heat press, you can also very simply make your transfer paper the size of the entire earring rather than just the size of that snowflake. That way your lines will be off the earring on all sides. Great info. Thanks for sharing your video. Nancy
New Subscriber
Thanks for sharing your technique for making beautiful teardrop earrings.
I've been doing my jump rings wrong all this time thank u so much....
Loved your video! You spoke clearly and slowly. So many people go so fast that I just shut them off as I have no clue what they're saying or doing. You explained things so well that now I'm comfortable making my own. Thx so much!! 😁
Peeling off is how I have always done it, I also cut pieces, peel off the backing and use it with my manual die cutting machine and dies for t-shirts etc.
Thank you for this wonderful video. Since I am rather new using my Cricut Maker, I have learned so much from your demonstration. You are a very good teacher.
Thank you so much for the in-depth details on making earrings. ❤
I learned so much from this video. Thank you so much. I’m new to the Circuit machine. You taught me a lot of good tips. Thanks!
I am brand new to making earrings and learned so much from this video. We bought a different brand of vinyl cutter and have yet to learn how to use it, but do have a laser cutter that we are using to cut leather and cut basswood covered with HTV. I was so happy to see the end of the video explaining turning the eye of the fish hook because I was wondering if I was doing something wrong when I did that.
Where have you been? I haven’t seen much from your channel anymore. Could it be my algorithm?
Wasn’t going to watch an hour long video but so glad I did. I learned so much, especially about the benefits of the Cricut Maker, I have a Scan n Cut and it’s not as user friendly. Highlighting the various presets makes using Cricut was very informative. Also liked your tricks about designing and assembly of your earrings, thank you and I became a new subscriber!
HTV....I had a suggestion when you mentioned the indentation around the faux leather, where the carrier paper makes a mark. If you cut the perimeter of the snowflake by cutting through the carrier paper, you'll end up with just the snow flake. Then you just put the snowflake down and it will not leave any marks when ironing. Or just cut the carrier sheet out larger than the tear drop and that will also work.
Your faux leather earing tutorial is very eaxy to follow and you included great tips. You had mentioned in the video that you would link your favorite HTV that has a smaller pattern that would fit nicely onto the earrings, I couldn't find that link. Thanks for sharing.
Oh goodie! A creator after my own heart! :) Now I am very interested in putting HTV on the FRONT of my earrings. I looked for snowflakes and found a bunch. I also received my double sided faux leather. Excited ab out those sheets, also! Thank you for the video! You are spoiling us!!! Take care!!! Blessings and Re Jouir -Darlene p.s. Told the husband about your daughter's sales. He said, "As it should be." :) :) :)
LOL ReDux ;) It is OKay! I ordered the Total Bundle of All!
Thank you so much!!! I was dreading making these baseball earrings since I’ve melted so many others and left lines! Great tutorial!❤
I’m just starting to make some earrings - mostly for myself and family and this video was so incredibly helpful. Thanks for taking the time to show us everything from start to finish!
Thanks Diane. So glad you found it helpful.
Very nice earrings. Thanks for the video. I learned a lot as a newbie. Making my first earrings today.
You have a very pleasant speaking voice, this was the first video of yours I have watched and it is awesome! I watch a ton of You Tubers and now you are on my subscription list. Things that I really appreciated were the tips-the impression of the htv carrier bugs me and that is why I found you. Loved that you showed what you were talking about as first timers wouldn't have known it was going to happen (like I did for an entire set of 35 earings...) I hated it! It wasn't very professional looking in my opinion. The snowflake cut around made sense as a hack I've also seen spacing them out prior to cutting so far so you can cut the individual piece larger than the piece it is going down on. However, you waste a lot of or some of the vinyl then. Does that make any sense? So the carrier extends beyond the leather piece you adhering to? And the pebbling thing- never saw this! Cool thing to be aware of. Love all your materials-I've only been getting generics from Hobby Lobby/Michael's/Amazon. I love your double sided. I really appreciated this video today! Thanks! Learned so so much-like the ice cube tray of precut prior to the "holiday" or "season" so you are ready!!!!
I have learned so much from you! Love the tips and tricks and that you offer your favorite vendors to purchase from! Merry Christmas!🎄🎅🏼
Thanks! So glad they’re helpful!
Loads of great tips, thanks for sharing!
Glad it was helpful!
Great learning lesson, great teacher. Thanks
Great video! Thanks so much for taking the time to share!! 💜
Beautiful earrings! Thank you for the tutorial
thank you so much. I knew there had to be away to apply vinly.
Your designs are beautiful!
the lines may be eliminated covering with teflon paper & doing a 2nd press for a few more seconds
To prevent the lines use a larger piece of transfer tape
I love all your projects I've started making earrings also but never tried putting htv on the earrings before ironing it I would cut the paper larger so it won't make indentation see if that works let me know great job awesome earrings
Thank you so much!
Glad it was helpful.
That is gingham. Where did the buffalo come from?
Great tips and love your videos! When I try to turn the bottom hoop on the hook where the jump ring attaches it breaks off.
Is there a way you could cut the carrier sheet when you cut the H TV so that there’s no overlay
Could you just cut a snow flake from the leather and then add iron after?
Well you get the lines when you press because you make them! what i mean by that is just cut the transfer tape bigger the the size if the earing so no lines of it are touching the leather that way you wont have any lines! am I wrong?
Also I am no expert but after seeing you cutting the shape of the flake from the transfer tape, why don you just run the design with a transfer on top of it that way you will have an exacted snow flake ready to press with no lines and the after pill the transfer tape!? wont that work? let me know if you try it and it works! i actually never used a circuit before, i did order one but it will take a few weeks till ill get it!
why didnt you just have the circut cut the carrier sheet , i think that if you just did an offset it would be easier.
Can we buy precut vinyls if we don't have a computer or a cricut?
Where do you get the designs from
Where do u find that file for the shape of earrings your using ?
What brand of HTV do you recommend?
I didn't see the light box referenced, the name please?
Hi Bonnie. Here is the light pad I'm using: Light Pad: amzn.to/3nkhjeD
Thank you and you are very detailed with every step and not so fast as we cannot do them. Your videos are very helpful and your list of everything you purchase.
Thanks so much Bonnie!