Jewelry Cup turned in Curly Maple
Vložit
- čas přidán 21. 08. 2024
- Woodturning a Jewelry Cup in Curly Maple
Hi my friends! In this video I use a beautiful piece of Curly Maple to turn a Jewelry Cup or Jewelry Tray. The utilitarian shape of this piece lends itself for many other uses. This turning uses techniques both for bowl turning and for spindle turning. I also highlight the preparation of the tenon used to hold the blank.
Este video está en Inglés, si prefiere verlo en Español, por favor haga un click en el siguiente enlace:
• Joyero en forma de Cop...
The link for the video where I prepare the homemade abrasive paste is the following:
• Homemade Abrasive Past...
The link for the video where I prepare the friction polish is the following:
• Friction Polish Formula
I hope you enjoyed this video and if that was the case, please make comments, give it a "like", share it with your friends and if you have not subscribed yet to my channel, please do it and when you do it do not forget to hit the bell icon so that every time I upload a new video you will receive a notification.
If for any reason you did not like it, or there is anything that I could do better, please, rather that giving it an "Unlike," please send me an e-mail to danielrvs@gmail.com. I accept constructive criticism, and there is always room for improvement and to learn new things!
The music was obtained from a royalty free sites that allows its use in videos. Most of it comes from the CZcams music Audio Library.
Thank you so much for watching!!
Cheers!!
Daniel
danielrvs@gmail.com
Disclaimer:
You, and only you, are responsible for your safety in the shop and for your health. The procedures shown in this video, (and my answers to the comments), although they are the ones I consider safe, are not necessarily so for every operator (wood turner, carpenter, etc.). Wood is a heterogeneous and unpredictable material, not two pieces are identical, even when they come from the same trunk of the same tree, shop tools and machines can cause damage to the operator, dust and other physical and chemical contaminants may cause disease and disorders when the operator does not take into consideration adequate protection. Always read operation manuals for your tools and machinery. This video can give you a point to start your research on what is the best for you, but, in any way is the only source of information. The level of experience of the operator is also a factor; procedures that may be safe for an operator that has a lot of experience may not be dangerous for an operator with less experience. If you do not feel safe or confident with a procedure you have seen in my channel, do not repeat it. Be safe and enjoy these activities.
Descargo de Responsabilidad:
Usted, y solo usted, es responsable por su seguridad en el taller y por su salud. Las prácticas mostradas en este video, (y las respuestas a los comentarios) si bien son las que yo considero seguras, no necesariamente lo son para todo operario (tornero, carpintero, etc.). La madera es un material heterogéneo y caprichoso, no hay dos piezas iguales aún en el mismo tronco de un mismo árbol, las máquinas y herramientas del taller pueden causar daño al operario, el polvillo y otros contaminantes físicos y químicos pueden causar enfermedad o trastornos cuando no se toman las precauciones debidas. Siempre lea los manuales de operación de sus herramientas y maquinarias. Este video puede darle un punto de partida en investigar qué es lo mejor para Usted, pero de ninguna manera es la única fuente de información. El nivel de experiencia del operario también es un factor, procedimientos que pueden ser muy seguros para un operario de experiencia pueden no serlos para operarios principiantes. Si no se siente confiado o seguro con algún procedimiento que ha visto en mi canal no lo repita. Manténganse seguros y disfruten de estas actividades.
That turned out beautiful Daniel! 👍🏻Can’t beat that curly maple! Thank you for sharing and hope you and your family stay well!
Hi Bill! Thank you, my dear friend, for your always kind comments! Yes indeed! When I found the blank among the stock of wood pieces I have, I knew it would produce a really nice piece. In this case, the grain is the highlight of the bowl! Cheers! Daniel
Very nice design an that curly maple is especially beautiful!
Hi Terry! Thank you very much, my friend, for watching the video and leaving a comment! I have not complains about the piece of wood I had the luck to turn, even rough you could already see that it was going to show beautifully! Cheers! Daniel
A beautiful little dish/cup Daniel.
The grain in the curly maple is amazing.
Take care my friend.
Cheers, Huw
Hi Huw! Thank you so much, dear friend, for your always nice comments! When I picked the blank from my wood stock, I already could see that the grain was going to play a big role in this piece. I am glad I was correct! Cheers! Daniel
Beautiful piece Daniel! Thank you for sharing... V
Hi my friend, always a pleasure! Many thanks for watching and commenting! Cheers! Daniel
Stunner Daniel👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎
Hi Alan! Thank you so much, my dear friend, for watching the video and for the nice comments! While I was searching for a blank for this cup, when I saw this piece of curly maple, even rough, I knew that the resulting piece was going to be really nice. Cheers! Daniel
Very beautiful Daniel.
Hi Jack! Thank you very much for leaving a comment! Cheers! Daniel
Stunning Daniel! The finish is amazing. Thanks for sharing this video. It's inspiring! 👍🏾
Hi Greg! Thank you kindly, my dear friend for watching and commenting the video! Another subscriber made a great comment, and I wanted to share it because it is important, in the case of the perpendicular grain, if the design of the bottle stopper has a very thin part, it would be prone to break there, so the 90° grain direction should take that into consideration. Cheers! Daniel
@@DanielVilarino Awesome!! Good to know information. Thanks so much! 👌🏾
1st 😂 I'll watch in the morning
Hi Huw! Thanks you my friend! Cheers! Daniel
Very nice Daniel
Hi John! Thank you kindly, my dear friend for watching and commenting the video! Cheers! Daniel
What is the size of the blank. Great video
Hi Paul! Thank you very much, my friend, I am glad you enjoyed the video! The blank was about six inches in diameter and I am not too sure about the height, but I believe it was between 3 and 3 and a half. Cheers! Daniel