2007-2014 Chevy Suburban, Tahoe, Traverse, GMC Yukon, Cadillac Escalade Key Fob Programming
Vložit
- čas přidán 4. 11. 2021
- #likesharesubscribe #subscribe
In this video, I show in detail how to program a key fob in less than a minute.
Here is a link to the part: www.ebay.com/itm/382424422897
INSTRUCTIONS (just in case I wasn't clear enough in the video).
1. Turn the key forward
2. Press the car symbol with the i next to it until you see (Press ⩗ to relearn key)
3. Press the ⩗ button (you should see "Remote Key Learning Active)
4. Then hold down the lock & unlock buttons on your keyfob until you hear a beep.
That's it.
Guy’s help me get to 20k subscribers! I have so many awesome videos coming.
If you like to support my channel, please donate using the link below.
Donate to support the channel:
Paypal email
wisenooty@gmail.com
Cash App
$wisenooty - Auta a dopravní prostředky
You're more crafty with key fobs than timers. Messing. But Ty for video
Well Terrance....gotta START the truck or you're fucked...thank u for all your help....
Well done!
Thanks David and thanks for watching!
Perfect video for my 2014 ppv, thank you.
You're very welcome. Thank you for watching.
How did you do the 2014 Tahoe?
@@loncoleman2804 , I will have to update the title as I believe most 2014's did not have this feature. 2013 was the last year they had this simple setup with the exception of a few smaller vehicles. Sorry.
2011 as the last year
@@TerenceDIY
I programmed two more of mine over a year ago and it works fine, then put it away, today I tried them, none of them work? I dropped the original one and lost the battery, so I took the battery off the one I programmed a year ago to my old remote just to lock my vehicle. So why did the memory program one forget its memory?
Are u able to program it to turn on with the key
But I couldn't see anything you did. What buttons did you press? Your camera wasn't facing what you were actually doing. Can you list steps? Thanks.
I apologize for that.
1. Turn the key forward
2. Press the car symbol with the i next to it until you see (Press ⩗ to relearn key)
3. Press the ⩗ button (you should see "Remote Key Learning Active)
4. Then hold down the lock & unlock buttons on your keyfob until you hear a beep.
That's it.
Once again, my apologies.
@@TerenceDIY thanks so much for that! Hoping this works for me.
@@TerenceDIY I have a 2013, it never showed "remote key learning..."
I meant to ask you what year your vehicle was. Unfortunately, they removed this feature in 2013 and up. Sorry.
I have a 2011 surburban. Same remotes you have but when I go to press that button I don’t have an option that comes up that says relearn.
Discovered that GM actually removed the ability to relearn from the Suburban 1500 LTZ ib 2011 at some point. I have a 2011 and had to have new FOBs programmed at a lock smith who use a scantool. Bought my own bi-directional scantool that had IMMO and can now do it myself.
You are correct. Thanks for sharing that info and watching my content.
It appears my suburban 1500 is the same. I missing that setting on the car. May I ask what bidirectional scan tool you bought that allows you to program your own fob.
Hi, I have a few. However, I was sent one to test recently by a sponsor and it worked pretty good. Affordable too! Here is the link for it.
www.amazon.com/LAUNCH-Bi-Directional-Diagnostic-Programing-Chevrolet/dp/B09XV8VR35/ref=sr_1_2_sspa?dib=eyJ2IjoiMSJ9.5EOWrDc_HRbUmUHlzXktaBeFH6I06nro6EWnl022kwPCKfWI-E-kIDRa7zxGjOl9GnhvbXAj7ie_NtBKdjCNDoCyke439IS9PLFyJuHzH8VW1JEr-tbsqE7yaLOpDyElLQDAQuI-Yeq2r1CHLYtQpmMYgvq8mw_5I2T2Rz0yPDm1YRWxMo4XrPiZ-nYQckt1F9Gp5fWKpONeV9p7zs6sGalEjZ9fFK_G55X9wtKI50WQrn-OXjVJ8MV0vHCCoF1nyorMbZ0-x1tk_38OBja4UD2PAuR9xbheT7zNz655P-8.ExHrP73oWUCjaVxbA-Axh6Ka0BSxlfxq9i_FF6eJ_Zo&dib_tag=se&keywords=GM+Key+learn+scan+tool&qid=1710201048&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
@@TerenceDIY Thank you
Please note that this feature is not available on certain GM models, like my wife's 2011 Traverse. About a year ago, I bought a couple of blank fobs and a "fastlink" OBD programmer on e-bay. I had the new and 1 old working fob programmed in less than 5 minutes. It worked great! It was way less expensive than going to a dealer or locksmith
I noticed you have a service air bag light, do you know how to fix that? I have to same light on.
My Dad's 09 Silverado had that light. It turned out to be a bad front impact sensor.
It’s a impact sensor couple hundred bucks
what key fobs did you buy, and where?
Here is the link....
www.ebay.com/itm/224586133977?fits=Year%3A2010%7CMake%3AChevrolet&hash=item344a6071d9:g:tyYAAOSwgophJyyT&amdata=enc%3AAQAIAAAA0ChGfRP53mz0r7r%2BKqKsaH1QqpjRNuY6%2BSFytiFe88Gg5cFVqc0Gir%2FnYFSr%2F4HdyIW0y6qzY5hiACTKZCDwicOS1j04QkCzB8Z4G5hKYqWN9td53dKui4pFWb39d97cKrqPvr9UaNiQk11P54UmzZDyy1ErUu5QE216gdXHuoNkZEPUE%2FFmT%2B9usweRSgxz%2FeDKCcYfzPsG%2FTCgwYivSayap%2BGslhniO26VFR%2BkUN7oeD6SrkeuzKk4VngyXJ6Lj0fJ%2FX86TqT5Yq8jItJ6Yfk%3D%7Ctkp%3ABlBMUIzL15iRYw
You never showed the button on the Dash t9 push. We don't give a Shit about speed we want to know exactly how to do it right
My 12 Tahoe never showed the relearn fob
So what did you do.
If your tahoe is a z71, LTZ, or any of the fully loaded packages you need to take it to the dealer or get a locksmith to do it
Same
Mine either but I have a 2011
@rrbangers5958 so theirs no other option?? It's a 2012 ltz, I'm not trying to spend too much just for a fob programming
Hello, good morning, I have a problem. I don't know if you've seen it, but Suburban 2012 doesn't have the remote replacement key option.
You are correct. They made it so you have to get one programmed by the dealer after 2011 I believe on the Suburban and 2013 on other vehicles.
I have 2012 Denali any ideas how I program it ?
If it does not have that option on the dash unfortunately, you will have to take it to a dealer unless you have or know someone with a expensive scan tool. Thanks for watching.
Please note that this feature is not available on certain GM models, like my wife's 2011 Traverse. About a year ago, I bought a couple of blank fobs and a "fastlink" OBD programmer on e-bay. I had the new and 1 old working fob programmed in less than 5 minutes. It worked great! It was way less expensive than going to a dealer or locksmith
What about for a 2014 traverse because it's not showing the relearn option for my vehicle?
Unfortunately, they removed this feature from your model. Sorry. Thanks for watching.
Damn mije doesnt work to start button and i have no check engine light at all like no lights at all in the dash any suggestions
No warning lights at all?? So you're saying nothing lights up when you turn the key forward?
@TerenceDIY yea the normal lights but it just sounds like wants to start but it doesn't idk why
Oh, okay. Tell me this. Is your service engine soon light on??
@TerenceDIY no is not on no light on at all it just cranck a bit and dies so idk if it doesn't have enough power or what other reason can it be
The reason I asked, because if there is any warning indicator light on the dash, the remote will not function properly. Are you only having issues with the truck when you remote start it?
2011 Chevy traverse My buttons are the same as yours. However, Remote anything doesn’t come up when I go through them?!?
Can you please help a sister out 🙏
Are you referring to the information on the instrument panel? It's not showing program a key?
@@TerenceDIY Yes sir! The one inside the car. The buttons beside the ✅ . I have no option to relearn or reset key of any kind. When I go through it, it goes through each category like car exit lighting on or off car light approaching on or off key lock when out of park. I hope that makes sense. It goes through all of the lock options. Do you think since it comes up at the end reset to factory is that something that I need to do?
Every time I go to unlock my car now the alarm goes off and it’s extremely annoying I don’t know how to fix it
@@TerenceDIY I even tried the (put key in, hold down the unlock button, switch key over 2 times)etc. nothing works. Man all I did was replace my battery in my original key fob this weekend🥴
Now my neighbors despise me cause my alarm goes off every time I have to get in the car.
Unfortunately, you will have to take it to a dealer unless you know someone with a high tech scan tool that programs the key fob. I don't know why GM desided to remove that option.
@@TerenceDIY whatta joke man! I’ll give you once guess what it might be 🤔…
💰💰💰🤢
Will it work on 2013 suburban?
I believe this feature was removed from the Suburbans after 2012.
Yes because I can't program my twenty thirteen suburban
I need to know how to reprogram for 2012 Tahoe
It should be the same or very similar. I believe they stopped this method in 2013 for the Tahoe.
My 2014 Traverse doesn't have the option to program the fob
You are correct. I apologize for not mentioning that in the video. Thanks for watching.
No option on the 2011 Yukon Denali.
I thought they went up to 2013 with that vehicle. Thanks for sharing that.
This doesnt work on 2011 tahoe i dont have setting to relearn key
I am surprised to here that. I could have sworn the cut off year was 2013 for the Tahoe.
Nothing comes out on my 12 traverse
What year is it?
@@TerenceDIY 2012
Please note that this feature is not available on certain GM models, like my wife's 2011 Traverse. About a year ago, I bought a couple of blank fobs and a "fastlink" OBD programmer on e-bay. I had the new and 1 old working fob programmed in less than 5 minutes. It worked great! It was way less expensive than going to a dealer or locksmith
Mine doesn’t have the relearn option
Yours must be a 2013?
Why isnt the 2014 suburban working? it doesnt show the relearn option
Unfortunately, they stopped this feature in 2013 on the suburban.
@@TerenceDIYbut my 2012 Chevy impala Ltz don't have this option either
Sorry to hear that.
@@TerenceDIY 😅
Step by step test msg pls
Doesn’t work on my 2013. Instead of racing yourself, why not show the button presses?
I apologize.
He’s trying to do a speed drill, im just trying to figure out how to program my key, idk what he did 4real
This only works up to a 2010...
Better start the trick it will kill your battery
is only good for 2010 and early models
U right, my 13 suburban will not let me do it
traverse 2011 don"t have tha key programing
I believe they removed that feature from the Traverse after 2010. Sorry I didn't include that in the video. Thanks for watching.
Please note that this feature is not available on certain GM models, like my wife's 2011 Traverse. About a year ago, I bought a couple of blank fobs and a "fastlink" OBD programmer on e-bay. I had the new and 1 old working fob programmed in less than 5 minutes. It worked great! It was way less expensive than going to a dealer or locksmith
@@louofm1 thanks for the tip....just found a Fastlink OBD for my 2012 GMC Yukon and will use it to program my key fobs.
I don’t see what you see on my Chevy traverse I don’t see relearn key
What year is your vehicle?
@@TerenceDIY 2013
@@bernicejones685, unfortunately, that option was removed after 2012 on your vehicle.
@@TerenceDIY dang so what now I have to pay the shop an arm and a leg to do it
@@bernicejones685 , unfortunately, yes. Or a local locksmith can program it for a decent price. Here is a link to find a locksmith near your location.
www.locatealocksmith.com/directory/
does not work past 2011
Thanks for sharing that.
Did you figure out how to reprogram a Fob for 2011? Which does not have the menu option to relearn on dashboard menu setting?
@@cklindsay6517 exactly the info I need as well