Video není dostupné.
Omlouváme se.
Mini Clubman barn door manual release
Vložit
- čas přidán 14. 08. 2024
- Here’s a very quick video to explain how to manually open the port side barn door on a 2008 Mini Clubman (R55 model). The electronics on mine have failed in some way, but searching for the initial solution was very difficult!
There are videos of half an hour to explain things in more detail, but getting the door open is the ticket to being able to find out what is wrong and how to fix…
On a saloon Mini, and some other Minis, there’s a ring pull under the rear seat that does the same job.
Thanks for that. I was about to start drilling and breaking things off.
That saved me today. Another Mini driver told me I hab to saw the bolt😮 Now I'll go over to the car and try your hint! Thanks so much.
I've said it before...This man is a gift from God!
thank you sir
Most welcome!
Fantastico. Un carrozziere voleva smontare la portiera. Grazie!!! 21:47
Hi,
I have the same mini model with exactly the same problem but impossible to find your cable, do you have any ideas? thank you
On some models, the manual door release is a ring pull under the back seat, lifting the seat from the front. I fixed my door by resoldering a dodgy connector under the rear door card, a two cable wire coming from the button on the handle.
Hi there I have a 2011 and I can't find either
@@132mikey123 I had it repaired and it cost me 150 euros with the mechanism, the mechanic did it in 3 steps, 3 movements, very quickly.... he tore off the rear panel and opened it with a hook.. ...finally it's very easy
@@DanBakerMusic I had it repaired and it cost me 150 euros with the mechanism, the mechanic did it in 3 steps, 3 movements, very quickly.... he tore off the rear panel and opened it with a hook.. ...finally it's very easy
Agreed
I have a 2009 mini clubman s and it does not have that. How can I open the left door ?
The ring pull for the door is on some models under the back seat. Lift the seat from the front and you might see it..
I fixed mine: it was a shot wiring connector under the barn door card. I just directly soldered the cables together and it now works fine
Uuuuuu man thank you you video