How to Install Hobbywing Fusion SE (Redcat Gen 9)
Vložit
- čas přidán 25. 07. 2024
- Hobbywing has really been pushing the RC crawler market for some years now - and this Fusion SE is no exception.
The 2-in-1 system makes installation a breeze - even in the most space-restricted locations. The brushless efficiency and quality then help the system last a long time!
In this video, I show you the simple steps required to install this system in the Redcat Gen 9 - but it will be similar to the process for other crawlers.
I also show my specific tuning options I like for this setup.
Hobbywing Fusion SE 1800kv: www.avantlink.com/click.php?t...
Hobbywing Program Card: www.avantlink.com/click.php?t...
Redcat Gen 9: www.avantlink.com/click.php?t...
Video Timeline
0:00 Intro
0:37 Removal
1:57 Install
5:16 Test Drive
7:13 Tuning
11:04 Final Thoughts
*Note: The provided links to the items recommended in this may be associate links. The great news about this: you pay the same price for the item, but I get a small kickback that helps me fund this channel!
AMain Hobbies Affiliate link: alnk.to/cHIb5Xc
Amazon Affiliate link: amzn.to/3DT66e3
Redcat Affiliate link: www.redcatracing.com/?ref=faS...
My LHS, Cookeville Hobbies: www.ebay.com/str/luvrc?_trkpa...
Get previews and insights by following us on Facebook: RoadsideRC
Instagram: RoadsideRC.
RoadsideRC Merchandise: roadsiderc.creator-spring.com/
Want to support the channel? Buy me a cup of coffee here: www.buymeacoffee.com/RoadsideRC
Music provided by T2NATE and the CZcams library.
Go check out T2NATE's other work: / @t2nate137
Great overview and info as always Troy!
Thanks Jonnie!
Nice install i like how compact that system is
Agree!! Really hard to beat for the price!
Glad you did a video on this I was thinking about getting this for my new enduro builders kit
For the price, it is hard to beat!
Damn good video !! Well done.
Thank you!
I have been looking at the Fusion Motors for a little while now. I think it might be time to give it a try. Thanks for sharing it Troy. :)
These Fusion SE are a great value/$$$.
Just make sure you get a slightly larger pinion while you are at it.
@@RoadsideRC THanks
This is a good video thanks
Glad it helped!
Ordered one for my gen8. What do you need to do to run the redcat light system on it?
The redcat lightning system plugs into the receiver. No issues with the esc/motor.
putting the 2300kv pro in my gen 9, would i need to change receiver to run higher voltage to servo since the servo can take higher voltage?
Nope! Will be fine with the stock receiver.
Is it torquier than the stock setup?
Yes - but not dramatically so.
Did you do the motor calibration before you put it in?
The Charlie show episode 292 explains it.
That video shows 2 main things:
1) calibration of neutral/throttle/brake. Yes - I did that once installed.
2) the motor-ESC internal calibration. That is not required unless there is an issue with driving. It is listed as optional in the manual and used as part of trouble-shooting.
@@RoadsideRC
My bad it’s the automatic motor pairing process.
What is the battery feature for the Redcat Gen9 Scout 800A?
I'm sorry - what do you mean by battery feature?
@@RoadsideRC The battery that the Redcat Gen9 uses?
@@scalemachinesandtrucks.5016 I typically use this one: amzn.to/3M9Mp83
@@RoadsideRC thanks 👍
I have the same exact setup....I'm wanting to go up a tooth or two on pinions but cannot find any pinions that will work with the hobbywing fusion se and the redcat gen 9.....I was told they are 32pitch and .8 mod but don't understand any of that....my local hobbyshop sold me a arrma .8 mod pinion gear and its MUCH larger like for a larger scale vehicle....can you assist with this?
Here you go: amzn.to/3PBPXln
These will work and give you a few different gearing options.
@@RoadsideRC many thanks!!!!
I did not see you 'pairing' the motor before actually running it...
Yep - you don't "habe" to do that. Only if you see issues while running.
great how to do it directions mate
*fully watched🥸Au👍big like for you*💯
Thank you! Cheers!
You going to feild day Saturday
I hope so!
Servo takes 8.4v
You don’t like the ramping of the throttle that’s what FOC is wow
Correct - I do not like that feature.
Gladly, Hobbywing understands and offers the ability to turn it off. Clearly I am not the only one.
Its why i bought this combo unit and the space saving.