Flat fender Willys jeep

Bringing home the Willys jeep. It was a long and hot day. But I'm glad to have it where I can start planning the build . I've been looking for a old jeep for a few years now. I just wish there was a little more of it.

[@andykirkendall8285]

@KaiserWillys has every thing you need for your jeep

[@VanGoGarage]

Ok thanks. I will definitely check it out.

[@michelle-lz8tg]

you are lucky to have found this..these flat fenders are now quite highly sought after..you may regret rat rodding it...personally i wouldn't do it...back in the day we used to put small blocks Chevy's in these..327's, 350's etc...there was an adapter available (still is from Adavance Adapters or Novak enterprises..)You wont be able to fit the Cherokee XJ drivetrain into the willys as there just isn't enough room...the engine trans/transfer case are too long for the short 80 inch wheelbase....a more practical swap is to do a chevy 2.8 v6 it's a 60 degree V so it is narrow and only 3 cylinders long...fits in real nicely if you can adapt it to your drive train...a vortec 90 degree v6 shares the SBC bolt pattern so you can use an available adapter with an original drive train (dana18, t-90 transmission).. just my thoughts though...no matter what you decide at least you are making an attempt to save it....oh..back in the day had a full sized bronco with an auto trans that constantly overheated...never solved it, instead hooked up a spare windshield bottle and pointed the nozzle at the front of the radiator...whenever it would get hot i just gave it a shot of water...worked for the few years i had the rig...cheers

[@VanGoGarage]

Thanks for the comment. If it had any of the powertrain I would be more inclined to keep it in stock form. But since it's just the body, frame and axles and there are quite a few of these old jeeps around here. I thought I could make a cool hotrod out of it and set it apart from all the other old jeeps. But nothing is set in stone just yet and I may change my mind 10 times before I get to work on it.

[@tomhaberkamp4728]

That is a 46 to 49 cj2a. The stock driveline is t90 trans, dana 18 transfercase and flathead 4 engine. My 2 cents is that the body is really pretty good and rebuilding it stock, or with a more modern 4cyl would be the way to go. These are actually getting harder to find and worth more stock.

[@VanGoGarage]

Thanks for the info. I'm glad to learn what I can about these old jeeps. I definitely think it's a good builder for which ever way I decide to go. I guess I need to go check out some old jeeps.