Ford Truck Back-Up Camera Install (Tailgate Handle)
Vložit
- čas přidán 16. 10. 2017
- I wanted to install a back up camera into our Ford Explorer Sport Trac but, the only problem was that I did know know where to wire the camera with it either looking tacky (the ones that screw on to the license plate) or just a bit off. One day I was driving down the street and I saw a Ford F-150 with a backup camera in the handle. no I didn't see one of our trucks of Ford Explorer Sport Trac with that same hat and this got me thinking.
Part links.
Tailgate Handle, Textured Black - with Camera Hole
amzn.to/2UrNIpc
1/4 inch CCD Flush Mount Backup Rear View Camera
amzn.to/2Gd994w - Auta a dopravní prostředky
Thanks for the video ! I am about to install the camera and this should save me much time and gnashing of teeth. 👍🏻
Very nice video. It is not to long or too detailed. It shows people everything they will be getting into before they start on such a project. Even the music is tolerable. I've been using a DIY license plate camera on my F150 hooked up to a headrest type DVD monitor. It's great for lining up my trailer hitch in the left right direction but not so great for seeing where I am front-to-back. I've been thinking about how to mount it near the top of the tailgate without cutting any holes in the painted part of the tailgate. Mounting it, or another camera, in the handle might work.
If you remove the latch rod clips, they should usually be replaced. This is the green clips when it says you don't need to do this. These are available new from Dorman HELP! line in most parts stores.
He didn't directly explain it in the video , but you don't need to release the latch rod clips. You can simply unbolt the handle assembly and drop it out. This will leave the latch mechanism in place so there is no need to adjust it, which is the cheap & quick method. The "working on my own truck and keeping it forever" method is to have the clips on hand and replace them since they are cheap plastic pieces. While I am in there and they are easy to reach, I will replace the clips.
Looking to do a similar install, thanks for detailing what you found. I was glad to see you solder the wires - too many people twist and use a wire nut. That works until it meets water and time will rust / corrode it out. Even better is to slide some heat shrink tubing over the wires before you solder, then heat it up and let it make a real tight seal. Better than electrical tape in my opinion.
me on the previous truck I owned (2001 S10 ZR2) the previous owner had literally twisted the wires together on the taillight when installing towing electronics. They had used bad quality electrical tape to cover it, too. Well, I ended up getting pulled over for it, thank goodness the officer was forgiving.
great idea
Installing a reverse camera and subs to my 2010 sporttrac. Couldn’t for the life of me find a good spot to get the video wire into the cab. Was really trying to avoid going through the firewall to save cord length but seeing as that’s what you did I think I’ll end up doing that as well. Seems to be the easiest route. Hopefully I can find another good entry point for my subs power wire as that grommet won’t have enough space for both. Thanks for the video!
Thank you did u end up finding a different spot?
Listen, don't be dog bark bashing. You need to plan your vids around the barking dogs schedule. If you don't, I will contact Sarah Mclachlan and she will charge you $29.99 a month and she will make all of your radio stations and CDs play that In the Arms of an Angel song in continuous loop. Oh and the ASPCA Gestapo will come and tazer you.
All seriousness aside lol, that was a good and informative video. Time for me to do the same project.
Got a question on your stereo install. What dash kit did you use to hook the stereo up to the factory bolt spots. I have an 04 F150 and bought a similar stereo but cant find an aftermarket dash kit that will fit the stereo properly into place.
I’ve bought 4 cameras with this tailgate handle and every single one is too small. Even the exact camera and handle from his links lol
Good job
I missed what you did to make it disconnect-able if someone needs to remove the tailgate.
I have a boss double din radio. Installation went great, because I watched your video. However, having trouble connecting the backup camera due to canbus. Do you have any recommendations for wire harnesses that use a canbus? I’ve been trying to find some at Amazon but none make sense for my 2007 Sports trac. Can you provide a wire harness using the canbus?
Hey man, Great Video been looking to do the same thing to my 2007 Sport Trac. Do you mind me asking what year is your Sport Trac and what Radio (Manufacturer and Model) is that?
I was gonna buy the camera and handle separate but decided to buy the whole unit
Thanks for sharing!
i realize I am kinda randomly asking but does anybody know of a good website to watch new tv shows online ?
@Korbyn Micah I watch on FlixZone. Just search on google for it =)
@Wesson Miller Yup, have been watching on FlixZone for years myself :D
@Wesson Miller Thank you, I went there and it seems like they got a lot of movies there :) Appreciate it !!
@Korbyn Micah no problem xD
Where did you get your touch screen deck?
Was watching your install .And I see I happened to purchase the same radio as u. How do u like the unit?
It's still going strong surviving Las Vegas dumber at over 120f and winters below freaking
Be aware my 2012 lariat has a handle that matches the paint.
The one I ordered is just matte plastic.
Same
A set of glow rods at home Depot will cost you around $40 and make pulling that wire a lot easier.
Did you power the camera of the reverse lights or something else.
Ford did use the same handle
I can’t find the video where you show how to connect the red wire. Can you tag me in it or something? Thanks
What year is that esport track? I have a 2008 and Amazon says that the part doesn't fit my truck?
It is a 2007, I am pretty sure that all Ford trucks of this era used the same tail gate handle. It gave me the same messages when I bought my truck. I am not 💯 sure for your specific application
The sport trac is the 4 door ranger that's been sold in Mexico and Canada for 20+ yrs and over seas.
All ford trucks actually use the same stuff and with the suv's aswell.
Edge, explorer, expedition, f150 and 250
Parts are interchangeable for the most park. Mirrors, badges, handles, radios, steering wheels, gauge cluster.
The reason why some things say they don't fit is because the seller pulled it from a certain yr and thinks it only fits that yr.
I have an 04 ford freestyle van touch radio in my 08 f150 because I didn't wanna pay 300+ for the same radio.
GRACIAS BRO! yo mismo he instalado la cámara. Sin duda, me quedo mejor jaja
que onda bro, soy de mexico, que medida es la camara? estoy a punto de comprar la manija por mercadolibre
@@JoseAngelDzib hola angel. Mira aqui te dejo el link de la camara que yo compre emln amazon www.amazon.com/dp/B083SF5VVN/ref=cm_sw_r_em_apa_i_28SGEbA7KSA57 . Pero sabes que me toco puli un poquito el hueco para que esta camara entre bien, la camara era mas grande que las comunes. Mejor resoluciom y demas.
@@kayocsar Gracias por responder. Pero si entro sin mayor problema? Estoy apunto de comprar esta pero veo es algo similar articulo.mercadolibre.com.mx/MLM-566126578-camara-de-reversa-_JM?quantity=1#position=1&type=item&tracking_id=8e5f7888-fa2e-4c3a-9968-6b1209514bf2
@@JoseAngelDzib estoy seguro que esa si entrará. La mia era un poco mas larga y ancha, pero nada que no se pueda resolver. Como te dije, el tema era que es una mejor camara. Pero la que tu vas a comprar es normal y no te dara pasatiempo. Con fe dale.
@@JoseAngelDzib czcams.com/video/eJZMGXp16KM/video.html
what head unit?
Lock solenoid? Looks like a manual lock to me?
You do not have to do this?
When is your garage sale?
If it's not your dog and you can hear it inside ?? That's a breach of peace !!!!
How has that head unit held up?
Still works 👍
There is a hole under the driver side to put a wire from the radio to the frame. A bit of research would have saved you 454 hours…
I have issues getting it too work.
My wife says the same thing about me.
Did you cut into a grommet? Sounds like you said you didn't, but in the video, it looks like you did.
Yes i did
Can you use any ground or has to be the ground on the reverse light
3 months later but Any ground is fine
If you put your tall gate down it would be looking at the floor
Yes that is true
Just like almost every new trucks camera does? Your point is?
You didn't have to remove or disconnect the tailgate linkage, Dude!!! Bad advice.
He makes a giant note in the video and says that dude!
Painful to watch 🤦♂️
Yeah, I would suggest cutting out all the extraneous stuff. 22+ min. is way too long for something like this...
Buy the handle with the camera, much easier and cheaper
Also, you turned a 20 minute job into 3 hours!
Looking forward to seeing your video :p