Does 8 GPM Machine and 2.3 Injector Use Too Much Bleach?! Lets See! - Honda IGX800 8 GPM AR Pump
Vložit
- čas přidán 1. 07. 2022
- FULL 8 GPM & 12 Volt Build Sheets. FULL SALES PITCH & WASH LIABILITY RELEASE
CLICK HERE store.payloadz.com/results/65...
BLUE GUN YG1635S (MUST USE WITH K1 or K7 UNLOADER) - amzn.to/3oSi0yc
BLUE GUN Set up - 1/2 to 3/8 - amzn.to/3w34c8f
BLUE GUN Set up - 3/8 QC Stainless - amzn.to/3BH3Ya7
FULL Roof/House Beginner's Setup - amzn.to/3bq5d37
BEST 12V PUMP - Flojet 6 GPM 70 PSI - amzn.to/3bI2XQZ
Fitt Force Pro Hose 3/4 - amzn.to/3cSBq36
ST 2305 Gun 12 GPM 5000 PSI - amzn.to/3Qnp95x
M5 7-12 GPM - amzn.to/3zglGyt
M5 3-7 GPM - amzn.to/3vmSVin
GP Surface Cleaner - amzn.to/3BHl6wO
3/8 DN10 - amzn.to/3QoN2cR
GP 2.3 Injector (1.25% w/ 8GPM) - amzn.to/3d3qfor
1/2" 50ft 6000PSI Pressure Hose - amzn.to/3d0czul
3/8" 100ft 6000PSI Pressure Hose - amzn.to/3zxytwD
Feed Reel Retractable - amzn.to/3bzmyqk
☕Thanks for the coffee!☕ rb.gy/4efa4n
💰Marketing to Grow Your Brand!💰lddy.no/11i3a
📚 Doing your own research but want in-depth advice or guidance? Click below 📚
/ @youngambitionya
EVERYTHING I USE
Soft Wash 12 Volt Equipment
Flojet 6 GPM 70PSI 12 Volt Pump - amzn.to/3bI2XQZ
Kuri Tec Softwash Hose ½” 100ft - amzn.to/3ENdeIq
Kuri Tec Softwash Hose ½” 300ft - amzn.to/3H053ua
Kuri Tec Softwash Hose 5/8” 300ft- amzn.to/3OXQqtZ
Stretch Hose Tank Fill 100ft - amzn.to/3q7Xg7B
Water/Tank Splitter 4-Way - amzn.to/3bL9drn
Noco Genius 12V Battery Charge & Maintainer - amzn.to/2ZW5FQt
Stainless ¼” Quick Connect - amzn.to/3EPZsVp
Suttner ST510 Soft Wash Gun - ST 510 Link
Hose Clamps - amzn.to/3q6pEXB
Hose Clamp Tools - amzn.to/3qnbmCf
Hudson Float Valves - amzn.to/3bHw4Eg
JRod Sprayer - amzn.to/3bFXudz
QC Shooter Tip - amzn.to/3CZCElD
Chem Thread Seal Blue Monster - amzn.to/3BM7QDn
Pressure Wash Equipment
Pressure Wash Gun - amzn.to/3o0HybL
Pressure Wash Hose 100Ft - amzn.to/3GPASWn
DN10 Ball Valve - amzn.to/3EGuxuz
Stainless Quick Connect PW - amzn.to/3EIPbKr
Suttner Turbo Nozzle - amzn.to/3CNR9Zr
Wash Safety Gear
Truwerk Wash Pants - amzn.to/2ZQqhKk
Huk Boot - amzn.to/31oG5nH
Rubber Wash Glove - amzn.to/3q4y3uA
Work Wash Glove - amzn.to/3BJZI6l
Vapor Respirator Cartridge - amzn.to/3q8cDwG
3M Respirator Mask - amzn.to/3CPmniT
Other Stuff I Use
Invoice2Go Estimates & Invoice - invoice.2go.com/
GoPro Hero 7 Black - amzn.to/3EAS1Bg
Roof Snot Roof Surfactant - roofsnot.com/
Fittings/Extra Part Storage Box - amzn.to/3q8YOOE
Whelen Amber Work/Plow Lights - amzn.to/3q77wNf
Whelen Duo Amber/White Work/Plow Lights - amzn.to/3D1OD25
IRWIN Vise Grip Skid Maintenance - amzn.to/3EJHRhJ
Ladder and Hose Ties - amzn.to/2ZSlNmt
I misspoke/didnt fully explain. It is a k7.3 going from pump to jump hose (3 is the orifice on the inlet and outlet pump side of the unloader and jump hose side going to the gun. There is a 3rd orifice coming from the unloader and that orifice bypasses back to the buffer tank. I had to change that orifice, the bypass to the tank, to 2. Not sure why but it was pulsating with a 3. You can simply buy and change out the orifices. Small threaded parts. Some use 3/8 for their bypass to tank. I was using 1/2. Maybe that's why? Idk but works great now
Can you do a draw test on the 2.3 injector? I’m not getting nowhere close to 1.25 %
Thanks for the info. Keep the great videos coming. ✌🏼
Thanks! Will do!
Like the flat bed on this truck with the crew cab. I have a simmilar setup without the fb and have been thinking of that conversion for months. Well done. I took the back seats out and it's great storage for just about anything. Thank you.
Thanks! I'm loving the flatbed. Share a photo if you convert
@@YoungAmbitionYA I like it
I just don’t want to spend 80k on a truck
Congrats on the new setup 👍🏻🇺🇸
Thank you!
Keep up the good work.. Like the new work truck she’s a beast
Thanks bro!
Awesome bro, really impressive setup 👍👍
🤙thanks!
Great video champ, keep up the good work 👍👌
What's up bro!
My 5 gpm has had that problem pulsating.
Good video, I like that blue gun
Nice rig bro stay blessed thanks from Vancouver Canada 🇨🇦⚓️👍🏼👍🏼😎
Eh? 🤣 thanks brother you too!
I've been waiting for this video
🤙🤙
truck is sick as hell, nice bro
🤙
Love that truck bro!
Thank you 🤙😎
That surging you're talking about is why I decided to go with the ZK1 vs the K7. I talked with the guys at Envirospec and they said exactly what happened to you that it's finicky and has to have a certain orifice on the return side. Glad it's working out!
How's the K1?
@@YoungAmbitionYA literally fine with no issue im assuming like yours when it's not pulsing. They said the k1 is just more plug and play by design
Nice! Once I put the right oriface in its been great! It's because I'm using a half inch return to tank hose instead of 3/8. But works great now
The M1A1!!!! Whooo!!! That rig is nice!!! Keep the content up!!!
M1A1? Thanks bro!
@@YoungAmbitionYA its US Army's main battle tank!! M1A1. When you pulled it out the garage its what I thought of.
🤣🤙🇺🇸 that's awesome!
Amazing rig fam 🔥🔥🔥🔥🔥🔥🔥🔥🔥
Thanks!
Hi Y.A.
Nice job...
Happy 4th of July 🎆
Michael C - (WA)
You as well mike!
Congrats on the new truck man
Thanks!
How do you do with well water sources? Is the 100 gal tank is enough or do u need find you need to stop and wait to let the tank catch up?
Do you start off the day with a full water tank when you head out? Or fill it 70%?
I'm always full. I never leave a job without filling full. Sometimes I have to wait on slower spigots or wells but it's very uncommon in my area. Most places are municipal water
So you have the blue handle hooked up to your 12v soft wash pump or your downstreaming with the 8gpm ?
It's on the 8gpm
There’s next $$ maker deal caterpillar Killing!! “Caterpillar Spraying”
🤣💵
My guy im going to be running a 4gpm system, which unloader valve should i use and how do i get it to the right pressure to use the YG?
Can dial down to about 1000 psi at the unloader. Safest way is to use a ball valve to shut off the flow before releasing the trigger gun
Have you thought about getting a pressure hose splitter? You could still run two 4gpm pressure lines for big projects, or a surface cleaner and the blue gun at the same time.
I got a gun sorta like the blue one, it will transition from 0 degrees to 45 without twisting, swapping tips or any of that stuff, you’re first blue gun video convinced me and made me look it up; plot-twist they’re $600 with international shipping!
I also still can’t get a good 4gpm JRod with 0030’s and 2530’s in it, let alone an assassin tip, without spending insulting amounts of money on shipping 🤣 I just get 1/4” and 1/2” quick connects from really cheap chinese pressure wash guns that I just toss in the trash after I disassemble the quick connects.
Make sure you run a k1 or k7 unloader with the blue gun. Splitter would be a good idea!
Hey YA, congrats on the new truck. I have a question, about run off material SH. Someone is asking me to vacuum capture run off? I know SH loses potency as it gets diluted. But how do I explain that to the customer. Respectfully. Thanks
That's a ridiculous and unreasonable ask honestly. To be 100% honest if it were me I'd walk away. Don't change how you do business for people who don't understand your business. Just my opinion. I 100% would not vacuum it
@@YoungAmbitionYA Thank you 😊
When you hit the windows are there water spots? we have hard water where we are at
Not in my area
The caterpillars are AWEFUL this year. I've been killing as many as I can whenever I can
🐛🐛🐛 invasion 🤣
Also, how much and what type of soap do you use in your downstream mix?
Panhandle sent me some lemon wash. I think it's like 1 cup per 100 gallons. At least that's what I use. Dilutes well
Happy 4th of July! 🇺🇸🦅🇺🇸
How long did you let the bleach dwell on this particular house? I think you mentioned in another vid you let it sit generally 15 mins?
Did you go up and do that 2nd story porch deck etc? Or did the owner not want it done?
It was just a siding wash. Wasn't hired to do decks. Dwell time only needs a minute or 2. But sometimes it takes 10 to get back to rinsing
@@YoungAmbitionYA Do you charge by the square foot or by the hour on the siding?
Brother how are you holding your skid to the flatbed. Im thinking of going in the same direction as you are
In the first 3 minutes of the vid when the truck comes out of the garage look where the skid meets the bed. There are two brackets we built out of angle iron. We drilled holes in the bed and welded 3/4 nuts in the hole. Now I can just line the bracket up with the hole and thread a grade 8 bolt in. The brackets also bolt to the skid. 4 brackets
Thanks brother. Truck looks awesome by the way
Moving from truck to another, he assumes that it's not damaged in the hypothetical accident. Remember, folks assuming makes an ass outta you and me😊
what lol?
Can I ask what engine you have on the pressure washer much thanks
it’s an igx800 with an 8gpm AR pump
@@YoungAmbitionYA thanks pal
How much are u pulling with that 8gpm? I get about 15 to 1 with 150' of hose
never tested it
1.25% gets the lichen & heavy black stuff off the gutters?
Yes and the pressure from the gun knocks it all off. I've never been able to get gutters as clean as I do now
Are you using the blue gun on your pressure washer? If so what pressure is it running?
Yes. Need to use a k1 or k7 unloader though. I'm using a k7 set to 500psi on a 350psi rater gun...although there is debate the gun will handle much higher. All stainless internals. It's the YG1635SS
Are you using the blue gun while downstreaming with your pressure washer? Is it not too much PSI?
using a k7 unloaded. still risky, so they say
What do you use as tie downs for your ladders bro?
Camping/cargo wire ties from home depot
Look into the Titan Straps
Amazon 👍
Do they make jrods for 8pm machines?
Yup
Or I could use my 2.5 gpm with that k7 would that work?
Might not be enough flow for the gun
How much chem are u using mixed with water
I use a down stream injector which pulls about 1%
What kind of spray gun is that? Where can I order one?
YG1635SS. Can't use it on a pressure washer unless you also use a k1 or k7 unloader
Do you use soap with the bleach. If so. How much. Thanks
1 cup to 55 gallons
I'm confused - isn't the K7.3 what you're supposed to be using? The 7.2 says it's for 4-6 gpm machines, and the 7.3 for 6-10 gpm.
I misspoke/didnt fully explain. It is a k7.3 going from pump to jump hose (3 is the orface on the inlet and outlet pump side of the unloader and jump hose side going to the gun. There is a 3rd orface coming from the unloader and that oriface bypasses back to the buffer tank. I had to change that oriface, the bypass to the tank, to 2. Not sure why but it was pulsating with a 3. You can simply buy and change out the orfaces. Small threaded parts. Some use 3/8 for their bypass to tank. I was using 1/2. Maybe that's why? Idk but works great now
@@YoungAmbitionYA OK, that sounds right. I went on the General Pump website and did some reading. For the bypass line it appears that sometimes with flow sensing unloaders you need to do some "tuning" to get things to run properly.
Thought u was soft washing you was downstreaming?
Yes sir. Using a 8gpm Honda to wash this house
Need to delete that diesel and save some headache down the road.
Hell yeah! 🤙
Why are using a Wash down gun rated at 350 psi on a machine rated at 3000 psi +
Because you can! The flow is great and the rating is lower than should be. Someone told me once why but I forget. This gun has all internal stainless steel parts and many people use it this way. I certainly wasn't the first
@@YoungAmbitionYA LMAO