Best Wash Gun For House Washing? Lets Find Out! YG1635SS vs ST2305 with M-5
Vložit
- čas přidán 22. 07. 2022
- FULL 8 GPM & 12 Volt Build Sheets. FULL SALES PITCH & WASH LIABILITY RELEASE
CLICK HERE store.payloadz.com/results/65...
BLUE GUN YG1635S (MUST USE WITH K1 or K7 UNLOADER) - amzn.to/3oSi0yc
BLUE GUN Set up - 1/2 to 3/8 - amzn.to/3w34c8f
BLUE GUN Set up - 3/8 QC Stainless - amzn.to/3BH3Ya7
FULL Roof/House Beginner's Setup - amzn.to/3bq5d37
BEST 12V PUMP - Flojet 6 GPM 70 PSI - amzn.to/3bI2XQZ
Fitt Force Pro Hose 3/4 - amzn.to/3cSBq36
ST 2305 Gun 12 GPM 5000 PSI - amzn.to/3Qnp95x
M5 7-12 GPM - amzn.to/3zglGyt
M5 3-7 GPM - amzn.to/3vmSVin
GP Surface Cleaner - amzn.to/3BHl6wO
3/8 DN10 - amzn.to/3QoN2cR
GP 2.3 Injector (1.25% w/ 8GPM) - amzn.to/3d3qfor
1/2" 50ft 6000PSI Pressure Hose - amzn.to/3d0czul
3/8" 100ft 6000PSI Pressure Hose - amzn.to/3zxytwD
Feed Reel Retractable - amzn.to/3bzmyqk
☕Thanks for the coffee!☕ rb.gy/4efa4n
💰Marketing to Grow Your Brand!💰lddy.no/11i3a
📚 Doing your own research but want in-depth advice or guidance? Click below 📚
/ @youngambitionya
EVERYTHING I USE
Soft Wash 12 Volt Equipment
Flojet 6 GPM 70PSI 12 Volt Pump - amzn.to/3bI2XQZ
Kuri Tec Softwash Hose ½” 100ft - amzn.to/3ENdeIq
Kuri Tec Softwash Hose ½” 300ft - amzn.to/3H053ua
Kuri Tec Softwash Hose 5/8” 300ft- amzn.to/3OXQqtZ
Stretch Hose Tank Fill 100ft - amzn.to/3q7Xg7B
Water/Tank Splitter 4-Way - amzn.to/3bL9drn
Noco Genius 12V Battery Charge & Maintainer - amzn.to/2ZW5FQt
Stainless ¼” Quick Connect - amzn.to/3EPZsVp
Suttner ST510 Soft Wash Gun - ST 510 Link
Hose Clamps - amzn.to/3q6pEXB
Hose Clamp Tools - amzn.to/3qnbmCf
Hudson Float Valves - amzn.to/3bHw4Eg
JRod Sprayer - amzn.to/3bFXudz
QC Shooter Tip - amzn.to/3CZCElD
Chem Thread Seal Blue Monster - amzn.to/3BM7QDn
Pressure Wash Equipment
Pressure Wash Gun - amzn.to/3o0HybL
Pressure Wash Hose 100Ft - amzn.to/3GPASWn
DN10 Ball Valve - amzn.to/3EGuxuz
Stainless Quick Connect PW - amzn.to/3EIPbKr
Suttner Turbo Nozzle - amzn.to/3CNR9Zr
Wash Safety Gear
Truwerk Wash Pants - amzn.to/2ZQqhKk
Huk Boot - amzn.to/31oG5nH
Rubber Wash Glove - amzn.to/3q4y3uA
Work Wash Glove - amzn.to/3BJZI6l
Vapor Respirator Cartridge - amzn.to/3q8cDwG
3M Respirator Mask - amzn.to/3CPmniT
Other Stuff I Use
Invoice2Go Estimates & Invoice - invoice.2go.com/
GoPro Hero 7 Black - amzn.to/3EAS1Bg
Roof Snot Roof Surfactant - roofsnot.com/
Fittings/Extra Part Storage Box - amzn.to/3q8YOOE
Whelen Amber Work/Plow Lights - amzn.to/3q77wNf
Whelen Duo Amber/White Work/Plow Lights - amzn.to/3D1OD25
IRWIN Vise Grip Skid Maintenance - amzn.to/3EJHRhJ
Ladder and Hose Ties - amzn.to/2ZSlNmt
Always explaining in detail
Always great content 4us newbies
Great jobby job bro ✊️
Thanks! 👋
Great job listing all the parts !! Thank You !!
Nice comparison! Enjoying your content. Learning a lot.
Thanks!
Great video and channel!! Thanks for all your help!!
🤙
Great video, m5 allows you to use it for downstreaming though making it more versatile. You need a softwash system to spray chem with the blue gun.
I like your attitude man.
excellent and thorough explaination of the products in the clipart of the video
good video
Man you’re killing me with them fiberglass ladder’s lol. I did a 4 hr gutter cleaning job the other day dragging a 32’ aluminum ladder around in 95+ degrees and it straight whooped my ass 🤣 love the videos bro!
Lol. 300lb rated ladder. Only 3lbs in weight difference. Aluminum 63lbs, fiberglass 66lbs. But I do agree hopping a 32 around a house all day does let you know you worked.
i HATE my 32 ft ladder. Hate its very existence 🤣
Just a heads up on the link to the Amazon DN10 ball valve in your description is for the BSP threaded version, not NPT. BSP is a 55° thread angle vs the 60° on NPT. Not sure if this is a mistake or not, just thought I'd let you know.
I hope I can get a little more rinse flow with the bypass on a 5.5
this a great video I the flow of both gun I am using a 12v setup now. I am very new to pressure washing so I maybe a bit slow getting the information you are explaining you are using 8 gpm machine and did or did not have to turn the pressure down on the washer.
8gpm, did not change the pressure
There is a guy on CZcams that put a stop on the blue gun, and he uses the ball valve to turn off and on, and the stop never lets the pressure gets to high and it looks pretty safe the way he use it. Just something to think about. Good video thanks.
i got a “pro” gilmour gun for softwashing, the adjustable pattern is so good. no clue what makes it a pro gun but it’s the only one they sell this side of the atlantic haha
🤣 I love Gilmore guns
love the setup! i have a ram 1500 with a 5.5gpm. looking to upgrade trucks and washers. What kind of flatbed is that truck? 8ft bed?
F350 9ft bed
Really appreciate this, though I need to look into your system a little more to see how its all running, as we are newly working with a 12v manifold system.
I was digging through your list trying to find the remote operated valve with no luck. Am I missing it or could you shoot me a link?
Google flowpro you'll find it
Can you make a vdo on the unloader please , ive been hearing and seeing these blue and red guns lately , love the fact that you don't need to change tips
Stay tuned
@@YoungAmbitionYA will do . I'm a greener, hope it's an easy concept
Great content as always. Do you have a good source to purchase the igx800 from?
Whoever has them in stock. I used Panhandle at the time
Good vid and tips. Very efficient process, would have taken me double the time. What did you charge per unit?
400 per building. They own 6 of them
Are you out of Lake George, NY? I'm just getting started in Albany, NY area.
I live in europe and we all have brick houses and cripi, can you also softwash the bricks like you guys do? We always use low pressure/100 graden water.
Yes just use a higher sh% on brick
an extra tank with pure water for the windows as a last rinse may be a wise option...... anything above around 20-30 ppm will leave spotting... Always best to know or test the water in the area with a TDS ,meter...... If you are throwing tap water onto windows there is a high chance when the Sun shines and you are looking out of the window that the windows probably look very spotty from mineral deposits. You could earn a little extra buy offering the customer a pure water final rinse..
Nice idea!
I’m about to start my own gig and I have no competition at all !!!… I do have very high paying job but hey! I just want to have my own scape from the same thing every day!!! We do get tired of the same thing! I just want to something different and still keep my job😂😂😂. I’ll still keep my job😂…. People tells me I have rich people problems, I just don’t consider such . I just want to do something ☝️
🤙
Hey where do you get your lawn signs and logo printing done? Great comparison on the 2 guns here. I look forward to seeing a disassembly of the both guns and see what's going on inside them. I bought the blue gun. I'll probably buy the orange gun too just to have it. Looks like it has good blasting power, too bad it's not comfortable.
I use UZ marketing. Link is in the description i believe. Orange gun is good but yeah it messes with my hand. The blue gun is super comfortable
@@YoungAmbitionYA Thank you. I didn't see it in the description, I'll double check again.
I have wide Sicilian hands and I grip things so hard I brake them. Lol anything skinny like that orange gun will cramp my hand up fast. Once I seen the blisters on you I said nah. The Midwest Pressure skid I ordered is due to arrive August 8th. I have no time to build my own rig unfortunately or I would have. I had them put the same 8gpm Honda you have on yours. 100 gal water, 55 gal SH tank. If I do infact start a CZcams channel, I'll post about it and give you credit for living outside the inner circle. Not much time running 2 businesses and rasing a 1yr old. Might be short clips posted every 2 weeks #bluegunrulz
@@YoungAmbitionYA I see it now "grow your brand" up at the top. 👍
@@ricardom.2687 hell yeah bro
With your expertise and guidance on a technical matter related to pressure washing equipment. It is my objective to understand if it is feasible to connect a blue gun to a high-pressure washer operating at 4200 PSI for the purpose of stream washing.
As we aim to optimize our cleaning processes, we are considering the integration of a blue gun into our existing equipment configuration. The intention is to achieve a more targeted and efficient cleaning methodology. However, we seek your valuable insights into the compatibility and practicality of this setup.
In particular, we are interested in the following aspects:
1.Feasibility Assessment: Is it technically possible to connect a blue gun to a high-pressure washer operating at 4200 PSI? Are there any specific adapters or modifications required to achieve this integration?
2. Performance Considerations: What impact will this setup have on the overall cleaning performance, including factors such as water flow rate, nozzle selection, and the ability to maintain consistent pressure during operation?
3. Safety and Compliance: Are there any safety concerns or regulatory considerations that must be addressed when combining these two pieces of equipment? Are there recommended safety measures to ensure the protection of operators and the longevity of the equipment?
4. Maintenance and Durability: What maintenance procedures should be followed to ensure the longevity and reliability of both the high-pressure washer and the blue gun when used together?
Your extensive experience and knowledge in this field would be greatly appreciated in helping us make an informed decision regarding the integration of the blue gun with our 4200 PSI high-pressure washer for stream washing applications.
Thank you for your time and consideration. I look forward to your expert insights and recommendations.
I like that blue gun.You think it would work well on a 5.5?
Man what a difference with that injector off.Rinse beast mode.
Looks like the M5 is slightly better for rinsing on occasions but not as versitile as ole blue.
Might not have enough flow on the 5gpm but give it a try!
Exactly what I was wondering with my 5.5 with the k7.2. Seems like it would work well with the orange gun if you need more reach and so much with the blue, unless it’s a single story house. Awesome vid for working smarter not harder!!
What do you recommend for gun wise 4-5 GPM? I been doing pressure washing but want to get Into the soft wash 12v system.
12 v use a sutner st510
I got the red AR45 but not sure how to convert to 3/8. Id the inlet a 1/2 BSP? How do I convert
Need a 3/8 to 1/2 Bushing. Your local hardware store will have it
What brand downstream and ratio of it are you using, I currently use a comet p36c for my chems but also have a hotsy 1260ss powerwasher on the trailer also, considering downstreaming to get around the dependability issue with the 12 volts and gas pumps, also have the same gun as you use, only its the red one. My power washer is 5gpm by 3500psi
I have a 2.3 injector oriface pulling about 1.25%
@@YoungAmbitionYA thanks for info
Awesome video. Im new to this industry buy i thought that blue gun coudl only be used for soft washing. So i can down stream with that gun?
Just asking cuz I want to do this and I don't have a soft wash system
I have a 4gpm
I'm using it with a k7 unloader
Hi ,great work bro.
Nice footage I didn’t know I could use the blue gun with a 8gpm pressure washer? How is your set up ?I would like to try it with my 8gpm.
Thanks
Install a k1 or k7 unloader
Ok got it. Thank you I’ll do that. I always see that gun and would like to try it out. Question installing any of those unloaders will it give me a stronger SH mix whenever I’m downstreaming?
Thank you 🙏
@@floridaprosoftwashllc.3416 unloaders have nothing to do with SH mix
@@YoungAmbitionYA got it. Thank you
Nice video are you using soap and sh or just sh? Thanks
Soap and sh
How are you mixing the SH & soap into the injector? You have a buffer and an SH tank - no batch. I've been doing via a 3-way through my mix manifold.... water = off, soap + SH = 100%... to injector. You?
Once I started down streaming I just add soap to my SH tank everytime I fill it up. So the I injector is always pulling a soap/sh mix. I still have an independent 16 gal soap tank for my roof washing. So if I roof wash I pull SH and house soap along with roof snot
@@YoungAmbitionYA Ahh.... sweet. I'll give it shot and see how that works for me. That's a much more streamlined way to do it for sure. You're the man. Thanks again.
I think that blue gun will work as a regular pressure washing gun for your 8gpm. I think what they mean by 350psi is what the gun puts out. Is this correct?
No, guns don't out out pressure. The pump does. The 350psi is a safety rating saying the gun shouldn't be used over 350psi
Found my answer for what you do in the winter 🤣
😄
Can i use this on a 4gpm pressure washer with a regulator? Or need that unloader?
Definitely the M5 with the orange gun. Just need an M5 for a 4gpm machine. Not sure there is enough flow for the blue gun
Gotta change pressure at unloader for surface cleaner? Thanks
i have my unloader set around 2800 psi. i never change it.
Any info on the performance of the blue gun with any 12v pumps?
won’t work well
Can I uset for 3,400 psI
Using that remote downstream what is your estimated S/H percentage?
The sh % comes from what injector you use. I use 2.3 which yields about 1.25%
I wonder if st 2305 work on 1,600 PSI 1.2 GPM electric pressure washer. Should I get 2,000 PSI or higher for performance. For my own house.
It should!
Would the unloader need to be set the same for 4gpm 3500psi?
Not sure. I've never used it on a 4gpm. This is my first one
Would using the ball valve gun with the m5 would help get away from having to hold trigger all day long on those bigger jobs?
I feel you in the trigger. hurting my hands and elbows . Thanks for the video!
Yes that could work
Why not get a data center Velcro strip to loop around
You could
I got told by a couple shops not to adjust the unloader's factory setting because it can mushroom the needle inside. And don't use the blue guns pressure washing. It's been working fine for you so I'm confused?
Unloaders are meant to be adjusted. The guns work fine if used properly, though not meant for this
@@YoungAmbitionYA looks like I need to order a black spring/knob to adjust mine bc it didn't come with it factory.
If you have a K7 it should be a silver hex bolt. Tighten the bolt to increase pressure. Loosen the bolt to lower pressure
Great video. Do you use your 8gpm with the blue gun?
Yes with a k7 unloader
@@YoungAmbitionYA ok cool. B ordered my Flow Pro and waiting for it to come in
🤙
Can I use that blue gun on a PRESSURE Pro 4000psi , 4 gpm belt drive pressure washer
Probably but 4gpm might not work as well. It's a high flow gun 10-16gpm
@@YoungAmbitionYA ok ty
What kind of soap are you using and at what percentage?
i run 12.5% sh mixed with lemon soap from pressure wash supply.com i throw in a cup of soap every time i fill my bleach tank
Do you find going from soft wash to pressure wash with the K7 pretty simple? I bought all your download docs and see the K7.2 orifice. Still working okay?
Yes it is simple to adjust for different jobs. The k7 is good. Some like the k1.
So your hooking the blue gun to an 8gpm gas pressure washer?
correct
How much you pay for your truck brother. So damn expensive around here and I guess everywhere.
Yes expensive everywhere. 1300/mo
Dumb question but…. Can Literlly everything get hit with a low %of bleach ? No matter the color or material? Or what materials should bleach not come in contact with? Just starting out. Washing my own house to try things out
For the most part, yes
If the material is synthetic. You will never have an issue. Look at it that way. Bleach reacts with organic material only.
If the orange gun is hurting your hand, open it uo and see if it has 2 metal triangles in it with a roller and a peg in it, I forgot if the orange guns do. If it does, take one of the metal tiangles off and remove the peg. You might have to bang the tip of the gun on pavement to get the peg to slide out. Your wrist will thank you.
will check it out
@@YoungAmbitionYA Yea ergonomics is no joke. That clicky peg assembly is dumb and can lead to cramped wrists.
Really liked the video -- would have never thought of putting a flow unloader and washdown gun on a pressure washer
Hope the ac units in there good lol
Sucks if not lol 🙃
Would the blue gun work on a 12v Pump ?
Not that well. Not enough psi or flow
The blue YG gun in stainless is $350 online. Not cheap. I only see 1 source for it. Where did you buy yours from? Amazon doesn't have the stainless version.
Tool barn
@@YoungAmbitionYA yeah that's the only place I'm seeing it for that price. How did you discover this gun to begin with?
@@ricardom.2687 seen other guys use it
Thank god that white house wasnt oxidized
What psi is your pump putting out while spraying?
I have it set to perform around 2500 psi using a turbo nozzle and using an M5 I get about 1000. It's a 3500 psi pump but changing the unloader settings and using different tips can give you more or less psi.
Your killing me not opening the screen doors and not spraying the underside of the porch.
🤙
I was wondering why does everyone spray so much after all areas have been covered? It seems like your just wasting product. This is a question because I’m learning.
Depending on how green the area is more sh helps. Just covering it once doesn't always do the trick
There's alot of guys out there saying that gun should not be used at all with a pressure washer including alot of websites that sell it im not agreeing or disagreeing was wondering your thoughts. Everyone that says not to use it is due to the possibility of the gun blowing up in your hand and or face just looking to keep you safe bud
Yes of course that's possible. But haven't seen any photos, videos, tests of it happening. Could be real or could be talk. Who knows? But what I know 100% fact is this is the best wash gun out on the market and works flawlessly, as of now, and it makes me fly through jobs. Everything in life is a risk I suppose. The unlloader malfunctioning is where the issue could arise. It's $100. Maybe I'll just use a brand new unloader every season
@@YoungAmbitionYA I've had the red gun sitting home all season you just convinced me to use it just needed that lil push thankyou lol
Facts.ive never seen a picture or a video of the blue gun failing..
In this age of social media we would have definitely seen it
Can you use that blue gun with a 12v system?
Not enough pressure or flow
@@YoungAmbitionYA that makes me sad
Which one do you prefer
ST 2305
Can I use this gun on a pressure washer without buying a whole new system
Yes I used it on an 8gpm with a k7 unloader. The k7 or k1 is a must. It does run above the manufacturer recommended psi so user beware I suppose
All I have is a simpson @3400psi-2.5gpm
What surfactant do you use?
Lemon wash
@@YoungAmbitionYA i can't seem to find it. Where do you purchase it from?
I get most stuff from panhandlepowerwashsupply.com
The better choice will always be water boss 750, thank me later. Been using them for years at chicken plant
I'll check it out!
With that water boss. What kind of pump are you using along with length of hose ?
And what would be the difference between his blue gun vs the water boss ?
You still use the blue gun?
Yes some times
How many gpm is that pressure washer?
8gpm
I had no idea that you could use that blue gun with an 8gpm machine
With the right unloader
What unloader do you recommend?
A k1 or k7
You missed a spot
That's just a stain 😂