The FAST and FOOLPROOF way to a RAZOR SHARP KNIFE! (Lansky deluxe multi angle sharpening system)
Vložit
- čas přidán 4. 08. 2024
- This is hands down my favorite method of sharpening knives. I get very consistent SCARY SHARP edges EVERY TIME using this system. I love this system because it is 1. Affordable 2. Fool-proof (read: EASY) 3. SAFE 4. Versatile.
For more information or to make a purchase, check out the links below:
Lansky multiangle sharpening system (standard set)
amzn.to/2OmeBpJ
Deluxe Serrated set (I bought this set to get the ultra fine hone, and serrated hone)
amzn.to/2RWkvyv
and I added the Extra Coarse diamond hone:
amzn.to/36ycVzz
And of course, you NEED a leather strop, this is the one I use:
amzn.to/312OVn9
If that one is sold out, try this one, it’s similar:
amzn.to/37C38c1
The other system I mention at the end is this one here:
amzn.to/2uD8OVy
*Prices mentioned in this video are subject to change without notice, please check the links for current pricing.
Full disclosure: I am an Amazon Associate, and the links in this description are affiliate links, which means that if you make a purchase, it doesn't cost you any more money, but I will earn a commission.
Want a Guns and Guitars shirt? buy one here: teespring.com/stores/guns-and...
Facebook: / gunsandguitarsofficial
Instagram @gunsandguitarsofficial
Support me on Patreon: / danthompson
Current Patreon supporters (as of this video)
$5 Patrons:
Yosemite Sam
Derek Weathersbee
Eric Robarge
Tanner Redman
Robert Wilson
$10+ Patrons:
Adam West
Bob Stokes
Brandon Leafblad
Charles Faulkner
Christopher Heath
john best
Nicholas
Peter Champlin
The Grapeman Reform
Background music made by Jordan Rowan of iMakeMusic
Email: imakemusic@gmail.com
Upwork: www.upwork.com/o/profiles/use...
Fiverr: www.fiverr.com/imakemusic_co
Audiojungle: audiojungle.net/user/imakemusic - Sport
I just found this video today. I purchased the Deluxe Lansky System with more stones and the ceramic hone. I love it but needed to really learn the best way to use it. This is by far the best tutorial out there. Even Lansky's own video is lacking. THANK YOU!!!
Dan, This still one of the best Lansky tutorials on CZcams. I just re-watched this video and wanted to add a couple of tid-bits. Even Lansky recommends NOT using oil on their diamond stones. Actually traps the filings between the diamond grains. The best process for cleaning diamond stones is water and a tooth brush. I've cut the bristles on a NEW toothbrush to about 1/2 length. That really stiffens them up. I then cut the brush to fit in the Lansky box. It's a a great diamond stone cleaner. You CAN use water as a cutting fluid if you like. A little messy but helps keep the stones clean while cutting. Lastly, when stropping, DO NOT roll the edge under. Instead, at the end of the stroke, flip it OVER, pointing back to the way it came. Watch a good barber strop his razors. This is how it's done. Rolling under can actually ruin the nice profile you just worked so hard to achieve.
Took me a sec to figure out what you meant here... but now that I got it... That might be a key mistake messing me up. Either way it is good advice and I learned something. Thanks
Glad to help.
@@Tool-Meister what do you mean by roll the edge under?
He means at the end of the stropping stroke roll the blade onto it's spine then back onto it's edge, as opposed to rolling it over via it's edge..... This preventing the edge to roll over....
Ive been practicing sharpening my own knives for about 3 years now, and you have now taken my knife game to a whole new level. Your Method using the Lansky Sharpening System is better and more effective than what the instructions say, Now my stubborn knives that are harder to sharpen are razor sharp all the way down the blade evenly. Literally shaved off even stubble on my arm. THANK YOU SO MUCH!
So very thankful for your content. I detest dull knives and have tried so many other systems. My dad used the Lansky system since I was a kid (haven’t been a kid for MANY decades!). You explained the technical details, and I’m excited to try them! Thank you!!!!!🎉
Sharpened four knives with the system and wasn't happy. Watched your video and perfection on the first try! Great job!
This is the best video on how to use this system. Can’t wait to try mine out again hopefully with more consistent results, thanks to this video.
this kit is amazing. my dad used to use one so i bought a kit plus their strop. I got it so sharp i couldn't even feel the blade catch on the hair when i tested the shave sharpness. that's better than even the razors i use.
Great video! So informative without bogging down the viewer!
I actually never thought abought buying used pocket knives lol.
Yea, it’s good, until you get a fake. If you do buy used pocket knives, make sure to check reviews.
Yes that's is true im just Twiddling my thumbs over here and swearing at myself because I just bought the benchmade autocrat and the the full size Benchmade barrage so yeah never thought about it lol
I know Heard him say that, paused the video and went for a 10 min used looking spree lol
Me neither, it’s pretty smart
Same im just trying to sharpen mine
I have been using the 5 stone system for about 22 years. I have only replaced a couple of the stones and they are affordable. I didn't learn about burs until I started refurbing straight razors a few years back (no this system will not work for that LOL), the explanation in the prior video was way easier to understand than the way it was taught to me then.
Thanks Dan. The best explanation of the burr I've ever heard. A lot of people, supposedly in the know, would make you believe that the back & forth motion with the burr will take it off. It doesn't. It does get progressively smaller with each finer hone and towards the end your just aligning the burr. Thanks very much for setting this straight in a video. By the way, I've been using the Lansky system for 40 years. Love it!!
wow thats a long time, didnt know it was out that long, where did you first find the lansky system? in a magazine? back then they didnt even have internet.
My dad gave me his Lansky sharpener from the 80s it still works great. I %100 recommend getting one of theses.
Just ordered one of these and watching a lot of videos on it, thanks for the good demonstration/explanation.
Oh I’m so happy this came across my suggested videos I’ve been looking for something and for whatever reason I was never ever pointed to the system, happy I am now, thank you
the tip about using the pen was the most useful tip i've heard on any of these videos on sharpening , wicked awesome !
Great video, thanks for sharing. I've had a similar sharpening kit for a long time and I've been using it wrong. I've been pushing the stone away from the blade, rather than toward it. I've always thought the kit sucked because I couldn't get a good edge. Thanks for clearing up my stupidity. I'm also going to buy a leather strap. Oh and the sharpie trick is genius.
I've had a lansky system that I picked up at a garage sale and haven't really touched it cause I didn't know where to start. This was super helpful thank you!
MAN! I'm so glad you explained to push into the metal, and not pull down away from it. So many videos and no one explains this concept and it's a vital one I suspect:) To a newbie, it looks like it would make more sense to drag the rods down over the blade, but that would be wrong. Push the rods up and across the blade. Excellent!
Iirc, Lansky says to push and pull, not just push. Next time I'm sharpening, I WILL follow these instructions.
Subscribed!
You can push, pull, or both. Doesn't matter. I push & pull with coarser grits, then on my final grit, I push it until the last few strokes, then I pull it for the last few strokes. But I've pulled it exclusively and it works exactly the same. You just have to be more careful, because the stone can come off the blade and the guide rod can hit the edge.
I have a Lansky and just learned I wasn't using it correctly from watching you vid. Thanks. Spent 20 or so minutes on one of my knives and it is much sharper.
Saw this and had to show the love. I've been using this system for decades. No need for anything else, unless you're sharpening a sword, and I've sharpened a 14" BEAST with the same set. Everything from razor blades, to KA-Bars, bayonets, spear blades...... My only two caveats are that, when I can, I put the knife in a soft jawed vice, AND to keep in mind that, unless you're shaving with it, it doesn't need to be shaving sharp. The first time you cut a piece of rope, guess what? Yup, dull knife. Great video.
I learned more about knife sharpening watching your video than I have in all others combined! Thanks! 😎
Thanks for this! I’ve looking for a tutorial video that really talks about how to sharpen with these kits. I have one of these but haven’t tried it yet. Now I’ll be sharpening all of my knives!!!🤘🏼
Good luck man!
Dan, thank you for posting your informative video. My brother gave me a Rigid knife with Damascus blade that was sharp looking (forgive the pun) but really was not functionally sharp. I remembered that I somehow acquired a Lansky set with 5 different stones but no instructions, and I didn't know how to use it. I found a diagram and printed instructions on Lansky's web site but they lacked what I needed. I was glad to find your video that SHOWED me how to obtain a very sharp edge on the knife mentioned. My holding hand got fatigued so I clamped the setup in my drill press vice. With assistance from a bright LED light and magnifying glass I could tell when the felt pen marks were completely gone.
Man this is awesome!! You are pretty much getting the same result that you would get with the wicked edge system but at the fraction of the price
Great video. Well explained, well filmed, well edited, good visual aids.
Good video with good camera work and narration, I can see you're a resourceful and boots-on-the-ground guy offering equally the same no-nonsense tutorials!
Love your channel; guns and guitars are my two biggest hobbies.
Gotta say, your Sharpie idea is genius. I’ve never been able to figure out what the bevel angle is, on my knives, or frankly been able to sharpen them to a razor edge.
I’ve carried pocket knives, daily, since grade school (45 years ago). In the 1990s, I started collecting and now own hundreds of dollars worth of very nice brand name knives; Benchmade, Spyderco, Cold Steel, Case, etc. I carry many of them until they are dull and then they go in my big wooden tool box, never to be used again. Can’t tell you how many $100+/- knives I own, that will now not even cut open a plastic packaging container.
Thur the years, I’ve tried several different sharpening methods from basic stones and rods to the pull thru quick sharpeners, to diamond sharpening systems and even a portable low RPM grinder. Nothing, I mean NOTHING has ever worked for me. It’s frustrating, I’m a civil engineer with a high mechanical aptitude, but I have never been able to learn how to sharpen a damn knife.
After watching your videos, I’m definitely going to hop over to Amazon and buy a Lansky kit, leather strap and some black Sharpies. I’m excited to try it out and (finger crossed) get a razor edge on some of my old favorites.
I used to carry a pocket knife to elementary school in the 90s. Teachers always knew, and never had any issues. I carried it 2nd through 4th grade, untilI I transferred from private to public school in 5th grade.
Thanks for the video helped me to use more efficiently and losing hair on my arm after sharpening four knifes.
Absolute boss video tutorial. I'm very new in knife-sharpening, and needed something that broke it down in understandable bytes (bad pun). Thanks!
Dude thank you so much! Finally a video that actually makes sense to someone not a knife expert lol. Thank you!
Great video! Thank you for a direct and no bs tutorial on this system. Love the name too. Sub’d. Looking forward to watching your other content.
I have the lansky , it's the best dollar for dollar sharpening system out there. I usually sharpen my manix 2 at 20 degrees and it comes out absolutely screaming sharp and after it's done it looks beautiful and is dangerously sharp just how I like it. Seriously no reason to spend hundreds on these fancy systems when you could spend like 25 bucks and get back a super sharp edge on virtually anything.
I ordered this today. I wanted to know how to properly sharpen a knife cause I have a few of them that I wanna maintain and keep sharp. I very much enjoyed watching your video, I will be back to watch it again once I get the kit.
Hey there dan ... great video and very informative about the system as i have just brought it but never sharped a knife before .. thanks mate keep up the work
Good video, just what I needed. I couldn't find an affordable sharpening system and easy enough for a beginner until I found this video. Not skilled enough or ready to put a couple hundred into a fancy or professional system.
Had one of those for years I love it and it makes sharpening so fast
This is the most helpful knife sharpening video I’ve watched. Thanks bud!
Great product review! I am trying to decided on a new assisted sharpening system and I think this will be it!
Awesome I just got a new knife I will try this out Rock On Brotha 😎 🤘👏 👏
EXACTLY correct. Been using Lansky sharpeners for 25 years and I even resharpen archery hunting broadheads back to factory fresh. Razor sharp.
Probably the best tutorial I've found.
Thank you for a very comprehensive and informative video, very enjoyable and well explained
Thank you again
Take care
Sam
I've used a Lansky system for years and use my knives for important tasks such as field dressing wild game. I just wanted to suggest that the Lansky mounting pedestal makes the system work much more effortlessly.
Yes but you must add locktite to the joint or else you are constantly dropping the clamp off the stand. It also helps to drill the stand into a board and that will hold it upright.
I have the stand with my set. I recommend it as well.
The C-clamp also works quite well. I loctited the vertical support with a little blue Loctite, and it's a champ.
I have had the 5 stone system since 2000. I have replaced 2 stones so far and purchased additional for serrated. I just recently got the c clamp stand, wish I had done it years ago.
There's a mounting stand for this?
Just ordered my Lansky system because of this tutorial, Thanks man!
I’ve had the system for quite a while but I have avoided it due to not understanding the technique involved. Thanks to you I’ll be sharpening my collection this weekend.
How have your knives come out now?
@@Mygraciously Very sharp, it’s all about technique.
I've had the basic 5 stone kit from Lansky for almost a decade now, I'd get pretty good edges on blades, but could never get a razor edge. After watching this vid, finally got a razor sharp edge on a blade. Thanks bud!
You’re welcome!
I love this video, I will gladly watch it again when my Lansky set arrives. :) Thank you.
Thank you. You literally took me from ruining my edge with this kit to razor sharp in about 20 minutes. Best tutorial I have ever seen!
same with me
I have a Spiderco set from 2003 or 2004, I have used it several times since then and I have never sharpened a knife or scissors as hard as I tried. I'm not even an amateur but as they say it is so easy to use for any beginner I will say it is not. Nice video.
This video is very well done, some great information and visual aids for newcomers to the knife world. I've been pretty deep into knives for about 10 years I remember being so frustrated trying to get an edge when I started out on a lansky I wish this video was around back then. One thing to note however, you have the old version of the lansky system when the clamps were made in the US out of thick aluminum. Nowadays they're made out of much thinner aluminum that tends to bend and alter angles in the process. That may be something to let people know just in case they've got the newer version.
Yep. I just bent mine right out of the box. Didnt expect that
And I was just looking at reviews to decide whether or not I wanted one.
I think this comment just made up my mind🙄
I love this video, saved so much by self sharpening knives. thanks again for the Video my friend
You sold me on on this sharpening set!
Great instructional video. Totally sold me on the Lansky kit.
Great video explaining things brother! I use the Lansky mount and I C-clamp it to the edge of my island in my kitchen and go to town on all knives in my kitchen! lol we have NO dull knives in our kitchen! 😂
How did I never see this channel before? My favorite G's
Great tip on the sharpy!!! Its those little adjustments that take us to the next level :).
I use a blue or green Sharpie instead of the black. It makes it easier to differentiate from dark shadows.
Ah yes, Guitars, Guns, and knives... What the world needs more of!
Thanks for your tutorial on this 👍.
Funny how things go full circle lmao started watching this channel for the guitars and now it’s for everything else😂
Love This. Thank you for another great video!
Thanks Jonathan!
Nice video, thanks for posting! I still feel like for $5 more the worksharp precision adjust is the better option, it has a base so you don’t have to hold it in the air while you sharpen.
Quick and to the point (no pun intended). Thank you.
Lansky set are nice I use it on my poket knife to make it so sharp I literally shave with it every uther day my every day carry pocket knife I highly recommend getting this set
Guns, guitars, and knives?! Subscribed.
I am definitely going to get this. Great instruction and video.
Thanks gene!
love it works great. just the right size
I have a regular stone and I truly believe that knife sharpening is just gonna be one of those things I suck at doing just tried my first knife cou
Great tutorial. Thank you very much 🙏
Lansky makes 2 bench mounts for their sharpening system. One is a clamp, to clamp to the side of a table or bench, & the other is a stand that can be screwed to a bench top, which is the way I like. much reliable to hold the blade sharpening system.
Thank you so much man. Just ordered all this crap. Finally had to get real with myself and just admit I'll never get my knives sharp with stones.
Thank you this helped me a bunch!
good info you put out. Nice sharpening video.
Your a legend! thanks for the tutorial 🤘😎🔥
Excellent job my hillbilly friend. Love the sharpie idea.
Thanks, very useful video n inspired me to get one.
Its the best.... Ive used my five stone set for years.... the stones last forever.
Good Stuff bredren 👍🏾
Thanks for sharing
Great video. I'm getting inundated with advertisements for the Horl sharpening system. Which for kitchen knives might be great. But I own this Lansky setup already. Thanks for the reminder on how to use it.
I have one of the things old LS Lansky systems, love that thing. Had a couple issues with the rods not being straight, thereby changing the angle a bit. I now mostly use the Spyderco system and like it for overall quickness and simplicity.
The spyderco system is great, I think the lansky is a little more versatile and foolproof. But once you have a good edge, it’s prettty easy to maintain it with the sharp maker!
@@GunsandGuitars agreed. I actually used the Lansky exclusively until a butcher introduced me to the sharp maker, much less setup time for basic blade maintenance.
I wish I got this I found at a thrift store in Kenai many years ago good stuff thanx
One day you should do a diy pedalboard. Other people have but they lack any charisma or entertainment to watch their video for more than 30 seconds. Plus there is a wide arrangement of options to design, shape, and substitute. You have that content that I often watch videos over in awe at your creations
Awesome! Thx for sharing!
I just bought a set from your link! Wooohooo! 35 bucks now though.
I have fallen in love with the new plug-in, belt sharpeners! Best $75 I’ve ever spent! I keep it plugged in on a bedside table and every night when I empty my pockets of EDC, I will just run the “knife if the day” through it real quick before I put it away. Especially after a day that my knife may have seen a lot of use. I liken it to how my Grandfather did with his old strop.(which I have now) He kept a strop on his dresser and did the same thing every night. I picked up the same habit, only technology has given me a better option. He taught me how to properly sharpen and always said that a dull knife is more dangerous than a sharp one! Which is SO true!
Agreed! I strop my knives every night as well. Your grandfather taught you well. Sounds like a great man
I have the lanskey system and like it very much, I have been thinking of a work sharp belt driven sharpener. Have you any experience with that?
Man..im pessimistic and everything along the lines of cheaper sharpening products seems like a gimmick to me.. This video sold me on the Lansky system and I tell you that I'm not looking back! You and this product brought some of my cheapest knives back to life. thanks.
Everyone buy this product and follow this tutorial.
Nice... been thinking I need something like this.
Sadly, lost my manly skills of sharpening a knife. Using both the standard & diamond kits. Thank you for the video. Best regards ...
Only just found this video but I bought one of these diamond kits about a year ago and they're awesome, you can buy the additional stands for them also to save holding it. Only downfall to the set it the guide rod can have a bit of play so you just need to hold it up so the angle stays consistent. 👌
Work 30 years with a knife in my hands. This (for smaller knives) is a good system.
Agreed! Just got done using this to sharpen a friends set of kitchen knives, took forever to do the big ones!!! I would’ve used my other sharpener for the bigger ones but they were too far gone and needed to be reprofiled.
@@GunsandGuitars So for my bigger kitchen knives, what other system do you suggest? Have Lansky deluxe for smaller kitchen knives. Thank you
It sure is the best shapining system! #1
Thanks for tip to check the factory angle
Awesome. I will get myself a Lansky sharpener
Between this video and project farm. It's a no-brainer
Loving the knife Content
Thanks herb!
I've used Lansky for a long time and for the price it's a good option. That being said i now have the Wicked Edge Gen. 3 and Holy cow, this thing makes knives very scary!
Can't wait till I can afford the wicked edge.i get a wicked edge with the lansky,I can just imagine what results I can get with the gen 3
Great vid! Thanks
Cool stuff Dan, where you at today, You know it just about Mari gras in New Orleans February 26 party starts early. Have fun out there.
Haha we’ll see!
I use an $8 Smith sharpening stone an old belt and an old ceramic rod with great success. I've also been sharpening knives for over 25 years
You should address the common issues with the lansky system. The metal rods are not straight and have to be bent into place and leveled properly with the stones. The clips they have to secure the rods put slit bends through out the rods and cause uneven angles. Another issue is the angle guide holes allow for wiggle room (up/down) causing uneven angles again. Great system, but has some flaws that will be frustrating for newcomers.
EXCELLENT VIDEO
Great vid brother-man!!! God bless!
Thanks Jason!
@@GunsandGuitars great video but is this the best knife sharpener you have come across?