I painted loads of cars in the 70's and 80's , and we only had enamel single stage with thinners no harder back then . Two coats and they would look like glass, no wet sanding or all that buffing , they do today . A better finish and lasted longer . This clear coat these days can't take the sun , you see cars only a few years old with the clear coat peeling . The good old days , the paint was far better and a fast job.
Yeah, but didn't they change the paints because they were awful for the environment or something like that? Same thing with the dyes they used to use on automotive interiors were very color fast and sturdy but caused every kind of cancer imaginable.
Paint is better today as it is urethane based,I will say it is a lot more expensive so you tend to see cars that have been painted having problems from someone using cheap material or trying to shortcut the job.I know when newer cars are painted in the factory they do not put enough material on one either which also leads to color problems for the shop repairing the vehicle.
I painted few dodge and peugeots on single stage. White and black. Using paint made in mex, it works awesome and has the same life as a clear coat. (5 years on acrílic single stage and médium quality clear). On the poliurethane single stage, it has 8-10 years of life. Both are for low cost but has very great results and quality. Even I've been sprying pearled red, greys, greens, silvers on single stage on chevys and volkswagens 😁
Great NewYork taxi yellow fella:) You are a master.Golden gands you have got from the big guy upstairs ! Be blessed.Keep showing gorgeous skills in tbe magic spray paint booth.
I must remember on the very final coat to slow down a bit as apposed to the first top coat. I had runs on the bus i painted today, only on the final coat.. I went to fast and go further enough over my overlaps/ Too much paint on the masking ran onto the surface.. I'm a rookie and the company allows for mistakes.. But I'll practice more on some panels for a few weeks before going onto the vehicles .. Great video and hands down to that experienced painter.. No substitute for experience, very clean professional work.
This is very humble and remarkable for you to post your mistakes.....thank you! This allows us to learn, and for you to learn. If you learn from your errors they are not mistakes but I call them training aids....lol!
I'm gonna be shooting my car in single stage white this summer. I can't afford to get base clear. Plus single stage white is easy to match. And I still have more custom work to do. This way I can do it gradually and not have a bunch of different colors or shades
Like it a lot man and I just learnt a trick today..thanks for that..putting clear coat in the paint for a extra chine..like I does do bike parts that cover ..I am from the Caribbean in the westing deas ..st Vincent and the grenadines..I look at a lot of videos and enjoy ..everyone have they own ways and tips..I like that..You a great day..do what you enjoy best❤👌👍🤛
Hey guys. I have a lot to learn. I am still confused between sealer and primer and epoxy primer. And there is paint with just reducer and paint with hardener and reducer and paint with a clear coat. I painted my interior with single-stage paint. It looked great when I was finished, but it became dull in about a month. It was mason paint I think from Napa. So many questions and not as many answers. Thanks for sharing.👍👍
Hey, I’ll try and clear some things up for you. Sealer always refers to a 2 part primer that doesn’t require sanding before paint. Epoxy primer uses a different resin than a regular primer(primer surfacer). Epoxy provides superior protection, but it is slow drying and doesn’t fill as well. Epoxy can also be used just as a metal treatment or sealer, many of these primers can be versatile and combined in the process in multiple ways. I could not answer as to why it went dull, that would require a deeper understanding of the process you followed.
@@Refinishnetwork Thanks for your input. I am just doing my own ride. I don't plan on doing this for a living. When I get my truck ready for paint, I want to do it once. Right now it is sitting with some parts in red primer of who knows what it is, Paint is dark blue and who knows how old and some bondo areas and bare metal. I was thinking maybe I should spray it with some kind of primer or sealer when I finish the body job and then paint it. I am going with a flat black os hot rod black as my topcoat.
Depends on the air temperature and if your using a slow or fast hardener. After 1st coat touch a part of the masking tape. If it feels sticky like tape, its ready for the second coat. If its not sticky and feels wet..... Wait longer.
Here on Maui we have high UV . I cannot get clear coat to last on outdoor kept vehicles. I’ve found that white single stage lasts longer with an occasional waxing. I hate to paint but I hate ugly sun burnt cars even more. Older cars don’t look good or right to me with clear coat anyways and I don’t drive newer vehicles anyways. Single stage let’s me sand my way out of problems painting at home. I asked the airplane guys how they were doing it . Now I know why so many planes are white.
First timer here... What do you wipe the car down with before starting to apply the sealer? I have asked a few people with no answer... I really want to spray a van that is used for underprivileged kids. I tried already and the paint is flaking off in places. Please any advice would be appreciated.
As an 18 year old in high school who is in a auto body class, i can do my best to explain this if you still need the info. Before applying sealer, I wiper the whole panel that I will spray, down with wax and grease remover, then I blow it off using a blow gun, and then I use a tack rag. I spray the sealer light as in all I want on the panel is just the color. You don't want the sealer super wet. Again sorry for the late reply, but if you need any further help, i can do my best to explain!
If the original single coat paint is good and we just want a repaint do you sand it first before applying the sealer. The reason I ask, is that the paint job that I followed did not give me the right paint so I will be painting over this paint job and I’m wondering how to proceed sealer and the paint or sand sealer and the paint?
Great job and the explanation was fantastic. Question for you...on single stage paint, I was told to do it in three coats: 1. light coat to provide a bite for the 2nd coat. 2. medium wet coat. 3. final medium wet coat. I've been having issues with graininess after applying a few coats of single stage black. Thanks again.
So with single stage paints they can be quite fusssy on how they are layed down my advise is spray similar to laquer/clearcoat. These paints are usually fairly dense so a bit of a higher pressure and fan adjustment is usually needed. Watch a few videos on setting a gun up for laquer and work from there.
I always see factory base coat clear coat peeling burning off ,Why? I spray single stage with clear on top Proves to be more durable no peeling fading burning off ! 🤔🤔🤨
What do you think about adding clearcoat hardener to si gle stage? Any benefit? Gonna spray single stage, should I go with a slow reducer or medium? Temp range will be around 80 degrees.
I am spraying Polyurethane single stage with a HVLP at the recommended pressure around 15psi . I love the paint but it does not love me. I get runs no matter how I spray. I tried one tack coat plus one wet coat and it runs, I tried one wet coat and it runs. I am starting to think it has something to do with the hardener. I am using PPG paint. Any comments is appreciated Thanks.
That is brilliant love it id like to know how the paint is mixed properly and the hardener ?? Well done nice colour and nicely put on cheers Larrysullivan in London
Looks great..."if" someone decided to clear it, would you want the second coat to dry and fix any spots before clearing or while second coat is tacky? Cheers! 🍻
how much more should i reduce single stage paint then what is allreddy in the mix cup becouse it comes out to thick and causes orange pell if leave it mixed the way i am suppost to. Larry B
Is this shot in Ontario? Pretty sure I worked with Everett when I started in the trade 13 years ago. Almost didn't recognize him without all his gold chains.lol
What was the bill on this job?? I’m a body guy about to spray single stage for the first time but it’s ford red JM and I’m wondering about coverage… maybe I’ll seal the entire truck in grey sealer
n I got tiger stripes with my new for this project devilbiss startingline spraying metallic, 22psi gave best spray pattern, slightly heavier on bottom, even when I turn air cap 180 degrees. Air tip clean. Held gun what seemed parallel to surface. sides are good- just hood,roof, trunk.Have 3 coats on and looks better but still can tell. So do I scuff and spray at higher psi and increase distance spraying to fix?
Great stuff. Been looking for someone laying down a single stage paint as using the same on my p6 rover although it is from a different manufacturer. 👍👍
Use single then topped with color shifting powders in high gloss clear. I did single because where I live there is no auto paint stores and it will get keyed within the first year. It was and hit with other people's car doors and carts. Never worth too much work since nobody has respect for other people's things
@@Refinishnetwork also it might sound as a stupid question but you do not need to clean the spray gun between the coats? No risk for the paint inside to dry ? Thank you!
You can. I have never observed a difference, however, many other professionals have said single stage Color has more depth without a clearcoat over top.
i really hate 2 or 3 coats paints, single stage is soooo much stronger, it doesn't peel like cleae coat, I really want to respray my soarer eith just single stage white, no bullshit of clear coat
To be honest if you keep single stage waxed and polished it can last 30 plus years I've buffed out the original paint on first gen s10s and people thought it was fresh
Yes, and he’s within 2-3 inches away instead of 4-5 so I guess if you like a thinner pattern and you want to spray close it’s a matter of adjusting your gun/compressor in this case a lower flow and psi.
Look at 8:22 in the vid- the Tekna gun has a monster fan about a foot wide. It looks like he overlaps a lot. Even and wet! Would have been nice to know which fluid tip, which air cap, how many turns out and air pressure. I'm guessing 1.2 tip, TE20 cap, 4 turns out at 29 psi. Comment?
You don't have to know how to do bodywork but you usually can't just step into a booth and start painting. I'm an apprentice painter and I do most of the prep work (Prime, sand, mask). Called learning and paying dues but it's worth it to me.
The gun man did a great job, his consistency and skill is evident.
I like how he picks up his wet edges as he moves around the car ..... inspiring me to paint my car myself
I painted loads of cars in the 70's and 80's , and we only had enamel single stage with thinners no harder back then . Two coats and they would look like glass, no wet sanding or all that buffing , they do today . A better finish and lasted longer . This clear coat these days can't take the sun , you see cars only a few years old with the clear coat peeling . The good old days , the paint was far better and a fast job.
Yeah, but didn't they change the paints because they were awful for the environment or something like that? Same thing with the dyes they used to use on automotive interiors were very color fast and sturdy but caused every kind of cancer imaginable.
I here ya painted plenty of single stage back in the day, plenty of depth not like the junk sprayed today with no shine or depth.
Paint is better today as it is urethane based,I will say it is a lot more expensive so you tend to see cars that have been painted having problems from someone using cheap material or trying to shortcut the job.I know when newer cars are painted in the factory they do not put enough material on one either which also leads to color problems for the shop repairing the vehicle.
With the high metallics, and tri coats, it would be next to impossible to spray the new colors and duplicate the depth with single stage.
Talking chalk and cheese
I painted few dodge and peugeots on single stage. White and black.
Using paint made in mex, it works awesome and has the same life as a clear coat. (5 years on acrílic single stage and médium quality clear).
On the poliurethane single stage, it has 8-10 years of life.
Both are for low cost but has very great results and quality.
Even I've been sprying pearled red, greys, greens, silvers on single stage on chevys and volkswagens 😁
Nicely done- good even motion on the part of the painter; still learning, thank you PATRICK.P
Glad you enjoyed it
Thanks for posting this! I'm spraying a VW Beetle with single stage paint and this video reinforced my thinking.
Good luck 🤞
Great video. UNO is an excellent product.single stage is the way to go on solid colors.
Great voice over! Explained alot bery Nice job! Love the yellow!!!!
Love the yellow finish.
Thank you for the video I couldn’t remember exactly how the clear worked
Hey you lol.... my main thought is where have Yiou been ? ... 5-6 years ago your vids were my paimt bible !!!! You are a great teacher and inspirer
I like Everetts style.Hes got his fluidity down pretty good. I really enjoyed the narration. Thank you for this great clip!
With ANY paint job, keep it out of the sun as much as possible......fantastic result out of the gun!!!
Great NewYork taxi yellow fella:) You are a master.Golden gands you have got from the big guy upstairs ! Be blessed.Keep showing gorgeous skills in tbe magic spray paint booth.
This is an awesome video!
Thank you !
I must remember on the very final coat to slow down a bit as apposed to the first top coat.
I had runs on the bus i painted today, only on the final coat.. I went to fast and go further enough over my overlaps/
Too much paint on the masking ran onto the surface.. I'm a rookie and the company allows for mistakes.. But I'll practice more on some panels for a few weeks before going onto the vehicles ..
Great video and hands down to that experienced painter.. No substitute for experience, very clean
professional work.
This is very humble and remarkable for you to post your mistakes.....thank you!
This allows us to learn, and for you to learn.
If you learn from your errors they are not mistakes but I call them training aids....lol!
I'm gonna be shooting my car in single stage white this summer. I can't afford to get base clear. Plus single stage white is easy to match. And I still have more custom work to do. This way I can do it gradually and not have a bunch of different colors or shades
Most high end hot rod shops use a high end single stage on there solid colors
Very true at our shop we done 90k car restorations with a badass one stage
You can still sand and buff.
makes it look better?
Excelente trabajo. Gracias por enseñarnos
Like it a lot man and I just learnt a trick today..thanks for that..putting clear coat in the paint for a extra chine..like I does do bike parts that cover ..I am from the Caribbean in the westing deas ..st Vincent and the grenadines..I look at a lot of videos and enjoy ..everyone have they own ways and tips..I like that..You a great day..do what you enjoy best❤👌👍🤛
Right on, thanks!
Hey guys. I have a lot to learn. I am still confused between sealer and primer and epoxy primer. And there is paint with just reducer and paint with hardener and reducer and paint with a clear coat. I painted my interior with single-stage paint. It looked great when I was finished, but it became dull in about a month. It was mason paint I think from Napa. So many questions and not as many answers. Thanks for sharing.👍👍
Hey, I’ll try and clear some things up for you. Sealer always refers to a 2 part primer that doesn’t require sanding before paint. Epoxy primer uses a different resin than a regular primer(primer surfacer). Epoxy provides superior protection, but it is slow drying and doesn’t fill as well. Epoxy can also be used just as a metal treatment or sealer, many of these primers can be versatile and combined in the process in multiple ways. I could not answer as to why it went dull, that would require a deeper understanding of the process you followed.
@@Refinishnetwork Thanks for your input. I am just doing my own ride. I don't plan on doing this for a living. When I get my truck ready for paint, I want to do it once. Right now it is sitting with some parts in red primer of who knows what it is, Paint is dark blue and who knows how old and some bondo areas and bare metal. I was thinking maybe I should spray it with some kind of primer or sealer when I finish the body job and then paint it. I am going with a flat black os hot rod black as my topcoat.
This is awesome!
I'm about to paint our 96 Impreza in single stage white. It will be used our recce car for rally in the US.
The car looks great.
How long should one wait in-between laying the second coat?
Depends on the air temperature and if your using a slow or fast hardener. After 1st coat touch a part of the masking tape. If it feels sticky like tape, its ready for the second coat. If its not sticky and feels wet..... Wait longer.
That’s gonna be beautiful when it’s done
Here on Maui we have high UV . I cannot get clear coat to last on outdoor kept vehicles.
I’ve found that white single stage lasts longer with an occasional waxing.
I hate to paint but I hate ugly sun burnt cars even more.
Older cars don’t look good or right to me with clear coat anyways and I don’t drive newer vehicles anyways.
Single stage let’s me sand my way out of problems painting at home.
I asked the airplane guys how they were doing it . Now I know why so many planes are white.
First timer here... What do you wipe the car down with before starting to apply the sealer? I have asked a few people with no answer... I really want to spray a van that is used for underprivileged kids. I tried already and the paint is flaking off in places. Please any advice would be appreciated.
As an 18 year old in high school who is in a auto body class, i can do my best to explain this if you still need the info. Before applying sealer, I wiper the whole panel that I will spray, down with wax and grease remover, then I blow it off using a blow gun, and then I use a tack rag. I spray the sealer light as in all I want on the panel is just the color. You don't want the sealer super wet. Again sorry for the late reply, but if you need any further help, i can do my best to explain!
Nice yellow! One question. Do you have a link to the silver container you mixed the paint in? I like it’s design. Thanks, Tom
If the original single coat paint is good and we just want a repaint do you sand it first before applying the sealer. The reason I ask, is that the paint job that I followed did not give me the right paint so I will be painting over this paint job and I’m wondering how to proceed sealer and the paint or sand sealer and the paint?
Great job and the explanation was fantastic. Question for you...on single stage paint, I was told to do it in three coats: 1. light coat to provide a bite for the 2nd coat. 2. medium wet coat. 3. final medium wet coat. I've been having issues with graininess after applying a few coats of single stage black. Thanks again.
So with single stage paints they can be quite fusssy on how they are layed down my advise is spray similar to laquer/clearcoat. These paints are usually fairly dense so a bit of a higher pressure and fan adjustment is usually needed. Watch a few videos on setting a gun up for laquer and work from there.
I always see factory base coat clear coat peeling burning off ,Why? I spray single stage with clear on top Proves to be more durable no peeling fading burning off ! 🤔🤔🤨
What gun settings was used in the video?
Hi there great video very informative! Also do you remember what was the name of the color that you’re using on the car
I’d really like to see it unwrapped
Great Job. What pressure is optimal for single stage?
A lot depends on your paint choice and gun but standard is around 2 bar or 28 to 30 psi.
Nice work! Did you only give the car two base coats and stop, or did you also apply a clear coat after your two base coats?
It’s 2 coats of gloss
@@smoggy1964 thank you, it looks great
nah theres no clear coat on top
What do you think about adding clearcoat hardener to si gle stage? Any benefit?
Gonna spray single stage, should I go with a slow reducer or medium? Temp range will be around 80 degrees.
I had a single stage job done and I wanted to protect it and decided to spray a clear coat and I ended up ruining the paint
I am spraying Polyurethane single stage with a HVLP at the recommended pressure around 15psi . I love the paint but it does not love me. I get runs no matter how I spray. I tried one tack coat plus one wet coat and it runs, I tried one wet coat and it runs. I am starting to think it has something to do with the hardener. I am using PPG paint. Any comments is appreciated Thanks.
Nice. I think single stage looks different. (According to how you like it). I like it with solid colours.
That is brilliant love it id like to know how the paint is mixed properly and the hardener ?? Well done nice colour and nicely put on cheers Larrysullivan in London
Really nice spray technique 👌
Beautiful job.. do you sand it and polish after?
Looks great..."if" someone decided to clear it, would you want the second coat to dry and fix any spots before clearing or while second coat is tacky? Cheers! 🍻
It looks really good for single stage paint!.
how much more should i reduce single stage paint then what is allreddy in the mix cup becouse it comes out to thick and causes orange pell if leave it mixed the way i am suppost to. Larry B
I’ve only ever sprayed base clear so how does a single stage hold up over time
A good single stage will last years. That's all that people used before base clears became popular.
Is this shot in Ontario?
Pretty sure I worked with Everett when I started in the trade 13 years ago. Almost didn't recognize him without all his gold chains.lol
Hi I need a little help please I've painted with 3:1 2k will it still go hard as next day it feels a little soft to the nail
Looks lovely , if you get a run in the first coat of single stage do you still continue with the second coat or stop painting
Nice single stage paint job man
What was the bill on this job?? I’m a body guy about to spray single stage for the first time but it’s ford red JM and I’m wondering about coverage… maybe I’ll seal the entire truck in grey sealer
Hi
What aircap and and needle size please??
Was it acrylic enamel?
This is 2k urethane, not enamel. Sprayed with a 1.3 tip and the HVLP aircap.
Refinish Network where's color number brother
Do you cut and buff after the paint is cured or once it cures is it 100% done? Thanks
I guess I didn’t wait long enough.
n I got tiger stripes with my new for this project devilbiss startingline spraying metallic, 22psi gave best spray pattern, slightly heavier on bottom, even when I turn air cap 180 degrees. Air tip clean. Held gun what seemed parallel to surface. sides are good- just hood,roof, trunk.Have 3 coats on and looks better but still can tell. So do I scuff and spray at higher psi and increase distance spraying to fix?
Do you add additional reducer to the 2nd coat? Though to me my a Dupont tech rep in the 70s, for painting helicopters
Gr8 vid. What kind of paint is it. Cheers
Can you spray Single Stage without sealer? For instance simply fine sand existing paint on the car and then do 2 coats of Single Stage?
Yes, you can. It may require more coats though depending on the transparency or the color. Yellow is usually fairly transparent.
Great stuff. Been looking for someone laying down a single stage paint as using the same on my p6 rover although it is from a different manufacturer. 👍👍
Use single then topped with color shifting powders in high gloss clear. I did single because where I live there is no auto paint stores and it will get keyed within the first year. It was and hit with other people's car doors and carts. Never worth too much work since nobody has respect for other people's things
Is there such a thing as to much base and to much clear? Does your paint work shine better and last longer with the more products you apply?
Yes, there is an ideal mil thickness range. If you have too much or too little paint it can cause durability issues.
What color yellow is that? I'd like to repaint a yellow Jeep. I plan to paint new grey primer. Any issues?
Nice job
how much do you leave between coats?thanks for upload
How long do you have to wait to apply the second coat?
Awesome
How much paint did you use to cover the whole car?
Whays the proper psi for single stage and amount of material
Looks good how many litres did the car take for both coats?
What's the best gun tip size for single stage?? Thanks
Great production, narrative, video, technique, all parts.... Thanks.
Great job.
Where can I purchase uno at?
I'm in ca.
How many gallons of paint did you use for the two coats?
Don't let him lie to u, pops has been painting a long time, look how wet he flowed that paint, boys he's good
That is good for tractor renovation
Paint job looks really nice
Before to paint do i need to take off the primer?
I used to shoot 3 coats in twice around the vehicle, ENAMEL!
where can i get one those sunlights from to check the paint?
It looks like it's a very good job. You can give me the code or the color name.
Yellow.... Your welcome😂
How long did you wait before starting 2nd coat?
Around 7-10 minutes
@@Refinishnetwork also it might sound as a stupid question but you do not need to clean the spray gun between the coats? No risk for the paint inside to dry ? Thank you!
Can you clear coat over single stage? or would the results not look right?>
You can. I have never observed a difference, however, many other professionals have said single stage Color has more depth without a clearcoat over top.
Nice job 👌 How long did you leave it before laying down the second coat?
Around ten minutes
Nice job thanks
Nice video 👍 what mixing ratio?
Came out great! Looks like a taxi but i love the color.
Dude - paint to the middle of the panel then continue the wet edge. Just a tip so you're not painting from the middle out. Great work though.
i really hate 2 or 3 coats paints, single stage is soooo much stronger, it doesn't peel like cleae coat, I really want to respray my soarer eith just single stage white, no bullshit of clear coat
To be honest if you keep single stage waxed and polished it can last 30 plus years I've buffed out the original paint on first gen s10s and people thought it was fresh
What grit should be good for sanding if I find some imperfections? Thanks
i’m definitely not a professional, but i always use the finest grit i can find
Looks his spray pattern is very narrow
Yes, and he’s within 2-3 inches away instead of 4-5 so I guess if you like a thinner pattern and you want to spray close it’s a matter of adjusting your gun/compressor in this case a lower flow and psi.
Look at 8:22 in the vid- the Tekna gun has a monster fan about a foot wide. It looks like he overlaps a lot. Even and wet!
Would have been nice to know which fluid tip, which air cap, how many turns out and air pressure. I'm guessing 1.2 tip, TE20 cap, 4 turns out at 29 psi. Comment?
Whoops- down the replies he said 1.3 tip and HVLP cap. That dude can really lay it on!
Thanks for the vid. Now I'm guessing the pressure was 22 psi...
Thanks for the tips. Is there debris on the new paint? Is that A common thing to fix in a booth?
There may be a few dirt specs that could be polished out, I am not exactly sure what you're referring to.
Looks damn good 👍
Love that pattern will be trying it
Ola.belissmo.lindo demais. Parabéns 👍👍❤❤❤🇧🇷
👍👍👍👍👍👍👍👍👍👍👍👍👐
It’s there a career for just painter or do you have to know the whole art of body work?
You don't have to know how to do bodywork but you usually can't just step into a booth and start painting. I'm an apprentice painter and I do most of the prep work (Prime, sand, mask). Called learning and paying dues but it's worth it to me.
What cod colour plesss
Can be put clear coat on the single Stage ?
What size tip was used ??
What is the psi that you are spraying with
Yellow pigment will safe the world...from red :)