Arlen Ness Method Clear Sucker Install : Twin Cam Harley Davidson
Vložit
- čas přidán 23. 07. 2024
- Shop Now:
www.jpcycles.com/product/181-...
Let your'e motor breath deep in style with the Arlen Ness Method Clear Sucker. A easy install with general hand tools. This install will be very similar on non-throttle by wire Twin Cams and Evo Sportsters.
• Forged billet aluminum air cleaner featuring a polycarbonate window allowing you to view the internal working of your air intake system
• Forged billet aluminum backing plate with our patented internal hidden breather backing plate technology resulting in no need for external hoses or hardware for a virtually closed loop system
• Radius air inlet provides unobstructed airflow into engine
• High performance filter is constructed from black pre-oiled cotton for optimum flow and filtration. Filter is washable & re-usable, recharge kits available separately
• Each kit includes backing plate, forged filter housing, clear polycarbonate top, filter, gaskets and necessary hardware - Auta a dopravní prostředky
See more at Countersteer. www.jpcycles.com/countersteer?Arlen_Ness_Method_Clear_Sucker_Install_:_Twin_Cam_Harley_Davidson&PnW9-qoHM
Thank god I found this. The instructions it came with were shocking. Thanks.
Not too many folks have this particular air cleaner, so I'm glad I found this video!!
I also have a Arlen ness air cleaner (the inverted series) and had a RSD Turbine on my sportster. What I dislike about those big guys (the cleaners) is the big black spacers on the breather bolt keep you away from adding an external breather kit. Or I haven’t found the way around it yet. These EBK Are pretty useful to keep the engine healthy
I like it 👍
If I installed this on my bike I'd likely tuck a small LED inside out of view for a nice little lighting effect
Thanks for stressing and demonstrating the importance of Thorque and torque wrench use
Amazing video. I am larning a little bit more each video. Thanks for the tips.
Glad we could help
lol "not good to get dirt into your intake" Harley: lets put the oil in here
Installed mine on my 2019 street bob with cobra short shots
Have a tuner with high air flow cleaner on it but when I start the bike it recs really hard around 4000 rpm, do you know why this is
Just picked up my first twin cam used to my old evo, stuck between two tuners, TTS or a power vision 3 or 4 I have v&h long shots and going to a thunderheader 2-1 and the method clear intake just curious what yall recommend
Any improvement in exhaust sound and or throttle response? Improve overall bike performance?
Hi Mine doesn’t come with gasket. Where do I get one that shows on the video ?
So I run this same filter set up. I live in oregon and ride year round and get stuck riding in rain . Ive noticed even with rain sock my bike running real bad . Is this common for this type set up?
Wanna buy this for my 02 softail but is it not in the way for your legs? Like that you leg wil hit it when you ride it
Looks great. Would have been a good time to run some sea foam through the throttle body
Mine came with 2 shooter tubes but not sure what they are for instructions are not a clear image to see where they go
What kind of grease do I use?
would i need the spacers if installing on a 2019 iron 883?
Yes, all bikes use the breather bolt spacers included in the kit.
What type of grease should be used to hold the o-rings in place?
KY lubricant
Most overlooked aspect of install. Can ruine expensive components by gorilla method. Beautiful filter assembly.
What do you mean when you say to "re-grease" the air filter once you wash it?
Re-oil it.
K & N sells a clean and recharge kit for reusable air filters, basically you run the nipple of the bottle down each crease of the filter untill it’s a uniform red color, you don’t use much oil just enough to turn the filter red, NOT have oil running all over hell and half of creation then reassemble the air cleaner and your good to go
It appears that the breather bolts get covered with those steel plates. Does the heads still breath well?
Yes, there are passages machined behind the plates.
The bolt is what’s called a banjo bolt, it has a hollow passage running down the middle of it
how do you get a gasket for this?
the AC kit will come with the gasket.
J&P Cycles mine broke due to a mechanic. wondering where i could get another but i just made one