Brian Miller It's actually super easy, it's cheaper too. I took it out for a water test and it ran perfect. Just get a coil with an internal resistor and a condenser. Condenser needs to be grounded and connected to - side of coil and power coming into the + side.
Brian Miller. You have one wire for the condenser on negative you have another going to the points whear dose that white one go to that is on the negative side of condenser
I don’t know if am confuse I ran the ground to the points and the other one to the coil and the condenser to ground and nothing I got one of the acces coils u thing that would be the problem I just bought the boat and I am trying to put it in the water to take my son fishing
Make sure your condenser is grounded, also run - to points. Have you checked the points or messed with them? There are nylon washers in there that keep system from grounding out. Without those washers you will not get spark.
At .55 seconds you say a condenser that goes to ground, did you mean conductor? I only see 1 condenser
coil is good condenser is good Wire and Spark plugs are good points are good too but stil no Spark
it is don
Did that to my 71 Evinrude it's not working I have a stator distributor in one it's not working any ideas
Kevin Romas check to make sure your not sending spark to ground, that's what was happening to me for a while.
Where & how did you learn to do this?
Brian Miller It's actually super easy, it's cheaper too. I took it out for a water test and it ran perfect. Just get a coil with an internal resistor and a condenser. Condenser needs to be grounded and connected to - side of coil and power coming into the + side.
Brian Miller I think I got it off iboats or boats.com. It's a pretty cool thing to know how to do.
Okay, just wondered.
Brian Miller. You have one wire for the condenser on negative you have another going to the points whear dose that white one go to that is on the negative side of condenser
Were can y find homs spécifications to se if it still good
Iboats usually has a lot of info.
could you help me please
Ey man can you send me a diagram on how you did it I am doing it on mine and is not working
Still no spark?
I don’t know if am confuse I ran the ground to the points and the other one to the coil and the condenser to ground and nothing I got one of the acces coils u thing that would be the problem I just bought the boat and I am trying to put it in the water to take my son fishing
Can you make a diagram to help me out please please
@@oscardelagarza9339 Do you have 12 volts running to the plus side of the coil?
Please
Make sure your condenser is grounded, also run - to points. Have you checked the points or messed with them? There are nylon washers in there that keep system from grounding out. Without those washers you will not get spark.
Oh ok let me check that thanks
I ran it straight to battery to just test it
could you help me please