5 NEED to BUY Attachments for your Oscillating Multi-Tool
Vložit
- čas přidán 21. 07. 2024
- The Oscillating Multi-tool is a great tool to have in your collection. This is an underutilized tool that more people should know about. And to help with that, here are five attachments that work great with this tool.
*Some of these attachments well not fit all tool brands, so make sure your brand is compatible before buying.
*
A simple way to support this channel is to use our affiliate page on Amazon. (paid link) No extra cost to you!
AMAZON Influencer Page:
www.amazon.com/shop/influence...
1. Square Slot Cutter: amzn.to/3IdCUjw
2. Dremel Jab Saw Blade: amzn.to/3ha9eaM
3. Dremel Contour Sanding: (Currently Out of Stock) amzn.to/3t0BceD
4. 3/8" (10mm) Plunge Blade: amzn.to/3h1Gpxv
5. Finger Sanding Pad: amzn.to/3H76jdF
Another brand of Contour Sander can be found here (but I have not tested it): amzn.to/3EJysJD
MORE VIDEOS:
20 Oscillating Multi-Tool Tips for Beginners
• 20 Oscillating Multi-T...
OVER 100 French Cleat Ideas PlayList:
• 20+ Simple French Clea...
*
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from CZcams library.
#multitool #woodworking #tipsandtricks
Proverbs 15:22 - Jak na to + styl
I really like this Guy and the way He presents the Subject Matter. No Wasted time with music or introduction of his Videos. Right to the point and covers the information with nothing silly. Doesn’t waste time at All. Excellent!!!!
Same here.
I like how you can take accountability for your mistakes and not blame the tools. Good reviews.
For the one shaped like a clothing iron you can take the large velcro disks and trace the shape and cut your own with scissors. Make sure you cut them slightly larger than the iron shaped piece, so that your velcro tool doesn't get damaged while using it. You can find larger 6+ inch disks on sale. The triangle shaped sandpaper is often more expensive. You can get quite a few triangle pieces out of one good-sized disc if you lay it out carefully.
Don't use good scissors, because they won't be good afterwards!
Don’t forget the tool oscillates so the electrical box cutter was spot on, the ends of the long sides move sideways, it’s how the tool works
From now on I’m referring to all my mistakes as.."user error"!!😏
Sounds like a good plan
Most IT issues are PEBCAC. Problem Exists Between Chair And Computer!
5:42 came as part of a kit with half-moon blades for ease of long runs in drywall. They're handy when installing locks. There's another blade I got for removing old caulk along windows.
I love my oscillating tool and these attachments look like a few more toys I need in my arsenal. Thank you for all your informative videos. I have a Chicago tool from Harbor Freight I bought over 10 years ago. ($19 back then!) Still works great! AND....I can use a lot of different brand attachments. A must have tool!
That is great to know, thank you very much.
If you have a Chicago tool that last more than a month, consider yourself one of the lucky ones.
@@SpecificLove7
Lifetime Service Agreement. No other tool manufacturer offers anything close to that? Stay with Ridgid! 🙂
The Imperial branded blades and attachments are really well made, and they have some creative types of cutting tools. I started using Imperial and have really had good success with them.
Another great video !! I'm presently refinishing/refurbishing a lot of Antiques so these will be worth their weight in gold for me !! THANK YOU once again !
You are so very welcome
I got a really good deal on a kit that included shears. I have cut flashing with it but what I like best about it is cutting cloth in to shop rags. If you're someone that does that, you'll appreciate what quick work it makes of it.
Regarding the narrow blade (tip #4). I just cut my wider blades down to whatever size I want. That way, I always have the exact size I need.
Can’t believe I haven’t thought of that… right, where’s my angle grinder. 👍🏼👍🏼
@@adamwilks same... eyeopener indeed
I refinished a set of wheels for my car, and the contour sanders were invaluable in the process!
Great to know it can be used on wheels, thank you
@@SpecificLove7 my plan was to repaint them anyway, so I was sanding down scuffs in the powder coat, that sort of thing.
You are a great teacher. I enjoy watching your videos. You inspire me and teach me at the same time. Thank you ❤️
Excellent review of useful products, I already had two of them and they work as expected. Imperial Blades does make excellent blades, but not all the attachments you showed. Again Thank you for making this video it will definitely open new possibilities with Multi-tool use.
Thanks for another very helpful video!
The sheetrock outlet box cutters are awesome! Gonna go get one right away
I didn't have any interest in an oscillating tool, having never used one before. I've always used a Dremel rotary tool with a flexible shaft for most detail cutting/sanding and a Rotozip spiral saw for drywall tasks.
Last summer I replaced my worn out treated lumber deck with composite decking. There were a lot of cuts and notches that needed to be made. My wife suggested that I look at an oscillating tool since she had used one while working as a set designer.
What a game-changer! Went with the Milwaukee M18 Fuel brushless variable speed model (Milwaukee is the cordless tool platform I committed to) and have been nothing but impressed with how useful and flexible an oscillating tool can be.
Looking forward to trying some of these blades and attachments!
I know what you mean. Once you have one, you wonder how you ever did without it.
Very cool. My girl always wonders why I spend time roaming tool aisles at Home Depot looking at new items - when I just came in for some fasteners.
Does she buy too many shoes?
Well I know for a fact these attachments will fit my multi-tool since I have exactly the same one you have. Excellent video and no, I have not heard of any of those attachments. Many thanks!
I really appreciate this review. Mostly because it showed for me personally there are better tools eg:
Jigsaw over the jab-saw.
Gluing sandpaper onto worn-out cutting blades instead of the sanding attachment (use dowel to get the rounded shapes) - and much much cheaper!
Respect on the interesting demo!
Justin, I glued on some velcro onto some old worn-out blades, cut up some sanding pads & it worked great !!
😎👍🍺☘
@@peterfitzpatrick7032 Respect, that's a nifty upgrade, I gotta try that!
I just got my first multitool (a Craftsman V20). The specific need was to cut 4 slots in some aluminum angle so that I could run a stainless steel worm drive hose clamp through them. The 3/8 wood/metal blade (bimetal) worked great, once I learned that the work must be solidly clamped down. The alternative was drilling lots of little holes and using a tiny file to connect them- too tedious!
Alan...spraying a bit of WD40 or even just plain paraffin/diesel/kero makes for much easier drilling, cutting & tapping aluminium..
😎👍☘🍺
Hook blade for cutting shingles. Works great on cutting the overhangs
After seeing this and how a reciprocating saw has been used as a spray paint can shaker I can't help but wonder what a great job an oscillating tool would do with the right fabricated attachment
Love this. Always looking for new stuff for my oscillator
Glad to help you
Nice to know, I will buy a couple. Thanks.
The Dremel contour sanding kit looks good . Thanks !
Great video, thanks for the info.
Great video, i love how you keep your tools on the. Wall ,so neat 👌
Thank you very much Nelson
I’ve been kicking around buying this tool I think you persuaded me thx. My wife loves it when I buy new tools
The 3/8 blade also works very good for pumpkin carving especially for children
I didn't know about the contour sander, so thanks! Amazon doesn't have them, but I found them on eBay today, and at a very reasonable price with free shipping. Should make sanding the exterior window frames trim on my house much easier.
I mostly use mine to sand in corners I thought I would use it to notch out base boards I currently use a dewalt triangle sander attachment but I will need to get those one
Very informative presentation. Thanks!
Clint You da MAN!!!! Love you vids!!! Thanks for the help
Thanks for the video. I don't think it's user error at all. The tool only moves side to side. The top and bottom work well as a saw. The sides are sweeping across the material.
I have been very curious about these box cutters, thanks for the demo
Show does the drywall tool work with drywall on ship lack walls?
Great display of accessories. The contour sanding set would definitely come in handy for me.
Are there any other options for purchasing it; as the Amazon link states 'currently unavailable'.
Thanks for sharing..
Buy a small Craftsman shop vac and use it to run with tools like this, especially while cutting drywall. Works great for flooring repairs and other trim jobs or fix-its that you dont want to spend a lot of clean up time on. The small shop vacs have a smaller diameter hose so its a lot handier than a full size vac. Also put a bag filter over your paper OEM filter, use a rubber band at the top to keep the cloth in place and you will extend the life of your shop vac. It does require more frequent filter cleaning but all you have to do is shake the cloth filter into a trash can or better yet outside at the dumpster, or stick your hand into a trash bag and shake it with the bag closed.
I like the dremel sanding adapter. I need that , IF I can find 1000 and 2000 grit paper. I have some aluminum tubing I need to shine up, and this would work great.
Love the video . Where can I find the contour sanding attachment? I looked on Amazon but couldn’t find it thanks 😊
Great idea thank you sir .
I have an idea for a drywall cutting blade (unless one exists already). When cutting drywall there could be times when there's fiberglass insulation with paper backing that I don't want to cut (or electric wires/pipes/etc) on the back side. A blade that will only cut 1/2 deep would be great. The blade could have a guard welded on top that prevents it from going any deeper than the distance from the teeth to the guard. Does this type blade exist? If not feel free to pitch it to blade manufacturers.
Great video, I didn't even know these attachments existed. Thanks brother, stay awesome!
Thank you, it is great to hear from you.
I note that you used a cover plate to check the single gang hole.
Would it not have been better to check with a metal box and a wing box since they are what will be inserted into the hole you cut?
are there other brands that offer different heads for the multitool like rigid does? makes it so versatile
I would add that a carbide blade for cutting heavy screws and metal is awesome
Great video!! 👍✌
Thanks for sharing your thoughts and this video 👍💡
Loved it like most never seen them before and as usual they are are all sold out!!
Bob
England
Great content and 0 fluff!
If you have any jobs with special width plunge cuts, take one of your normal width blades, mark the sides and grind it down to the width or shape you need, keep cooling it in water as you grind to keep blade from getting too hot. Even a thin cut-off wheel on a die grinder will work, then dress the edges with a file or sanding block.
Do not worry about electrical covers, over sized plates are made for just about everything nowadays.
Thanks for sharing, don't let your thoughts lock you into a box when you have a difficult situation...
Thank yo for posting this helpful video
The electrical box blades are going to make the top and bottom a little bit wider based on where the blade pivots , thats not your fault, its the mechanics of the tool. Looked like a very clean cut
So cool!
Re: the drywall attachments, you should have demonstrated the cuts on a vertical wall. Other than holes for lights, most cuts will be on a vertical wall. Even the circular hole demonstration should have been done overhead to show how the tool works in a practical application. I really liked the contour sanding attachments! I will be getting that fir sure!
Thanks for another To-The-Point video without music!!!!
would have been nice to see if a cut in electrical box (and of different types) actually fit in the cut out and if additional modifications were necessary to fit the box.
2:48 does anyone make skinny blades that could be used for curves? Kinda like a jigsaw blade but for the OMT.
Fantastic! There goes my next paycheck 😮
There's an adapter for the two major blade attachment styles. Can't say for sure that it will work in both directions, but it allows me to use every blade I've ever purchased.
Great to know thank you for sharing
Yeah... like a lotta people here, I love my multi-tool & am always looking for ways to expand its usage...
I wonder tho... on the bigger attachments like the outlet cutters ... does the extra weight have a negative effect on the wear profile of the machines... gotta think the extra mass isn't too good for them... 🤔
That is a very good question to think about
Had no idea these attachments were sold 😊
Hi great video JUST a point as a fully trained Face Fit Tester dust masks only work on a full clean shaven face Bear Hull UK
Those are some neat attachments. They definitely can come in handy. I have 2 oscillating tools. But I have problems with the blade staying on the tool itself. The blade is held in by a bolt that is cranked down with an Allan wrench. It works for a few minutes & then the vibration makes the bolt loosen up & the cutting piece falls off no matter how much it's been tightened. Can I ask if you might have any suggestions or ideas that might help fix this?
Sorry but I have not worked with that type of oscillating tool so I am not sure how to fix it.
The hex head cap screw should also have a crown washer with it. The crown "pushes" back against the screw to eliminate walk-out.
So will it cut with the box nailed in
Very cool, I’ve not seen any of these.
what is a short small sized multitool for tight spaces, about 20 cm ?
You should check out the multitool blade sharpener, would’ve been a good addition to this video
The little narrow blade might be good for making mortises.
Headed to the link to buy the contour sanding kit and its sold out. :(
The Dremel contour sander sure looks useful however they have discontinued production. Would you have an alternate that you could suggest?
Wow, I did not know they did that. Sorry, it is the only one I've seen with that design.
Hello Mr. Wood. Love Your Channel!!
Thank you very much Scott
@@SpecificLove7 You're welcome!! :))
Coooool! Me likey!
When I looked up the really narrow blade, it was basically $7. Amazon showed me a alternate of 10 blades for $16 that may not be having a name brand on them probably, but for that price, why not?
Definitely save the money on the larger quantity. I just wanted to link to the one I use.
@@SpecificLove7 understandable, but even if alternative generics last half as long per blade, it’s still cheaper buying more for less than $2 each.
They also make a 4 in one drywall tool.
Mark the cuts then score the surface with a knife before cutting out,the blade follows the knife cut for a neater finish.
Great tip, thank you Robert
I have the Ryobi Oscillating version, do all these attachments fit that tool are they universal i meant to say.
Stay Safe,
Barry (ENG)
They all fit my Ridgid brand, so I would think they would fit the Ryobi as well, but I have not tested it.
with a sealed box can it be used as a super/ultrasonic cleaner ?
Try it, and let us know.
@@johnstarkie9948 it did work, weld on. better than any vibrator
How was that user error with the box hole cutter? It seemed like you used it as well as anyone could.
Just figured I could make it a little better with practice
@@SpecificLove7 there will always be some waviness simply from how the blade oscillates.
Probably works best on lower oscillation angle multitools.
It would boost our confidence if you practiced before filming.
It's the kind of "error" that would be hidden behind a face-plate anyway.
Unfortunately, the Dremel contour sanding kit is discontinued...
#1 is way to specialized and doesn't seem practical (cost wise) unless you are doing production work especially when #2 can generally do the same thing but would have other uses beyond cutting a rectangular hole in drywall.
Other use for #2? I've spatchcock a super large turkey with my OMT, I think this would make that much easier; assuming the teeth were up to the challenge.
I’d prob test dry wall on a vertically rather than horizontal
Only bummer is many items said no longer available?
The first question isn't if a plate cover will work, but will a remodel box work?
Great video …. User error = I screwed up . Lol +++
1:37 needs a test fit of a box
I so very badly wanted to see if you could slip a single gang box through the electrical box hole with out some extra cutting. Or even a remodel box, those suckers are a little extra thiccc
And of course, Amazon is out of stock or item is unavailable on the two I was going to order.
Good luck getting the scratch pattern out after sanding wood with any multi tool if you plan on staining and finishing.
the sanding attachments are definitely drool-worthy - probably good idea to get a corner shaped piece of thin, durable plastic to guard the wood inside the corner so you don't mar it...
That is a very good point, thank you for reminding us
Unfortunately these sanding attachments are made of cheap metal and break after a couple of hours of use
I think it would take me longer to change the attachments then it would to do the job
18JUL2022 - Did the first tool size the hole for the BOX? The hole is for the box, not the cover.
The box shaped cutter doesn't work properly on the sides because the cutting teeth are not oriented properly for that. The tool only moves the blade left and right, not up and down,
😊👍
My biggest issue is the high cost for a blade that doesn’t last that long.
Me, who doesn't own an oscillating multitool: Interesting.
Why didn’t you try it oh all kinds of Materials like fiberglass plastic !
WalMart sells the attachments super cheap
Friendly suggestion: if you make a cut and see you have a user error, make the cut again and mention that this tool requires some practice.
It'd be better to see that the tools are actually able to make a good job, after all the tool might actually be bad and it's not really a user error...
Nice Tips.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
Thank you Dennis