Great video... I just got the multi one loader. I like the avant machine but the multi one was 4 inches lower..That's a big deal with me because I'm able to drive into garages with no problem. I'm especially thankful for the knowledge I've been getting from your channel. Keep up the great work and have a productive and enjoyable day.
The flail mower seems to be between a bush hog and finish mower. As for moving branches after I drop a tree, I use a 6' landscape rake on my 37HP tractor. I drive straight into a huge pile of limbs in H1, drop the rake and never stop moving. Sometimes branches will snag the throttle linkage but that just makes things interesting. I can straddle small trees and use the rake to snag the trunk or for larger ones I keep a chain attached to the boom of the rake. The rake is the only attachment I purchased new and for around $500 it was well worth it! Keep in mind that this is in my own yard or sometimes for a neighbor and not for hire.
I had two Wacker Nuesan WL wheel loaders , A 30 and 32 , similar to avant approx 48” wide loved them in particular the 32 , bought used from rental co with very low hrs , like 200 hrs 35K , what’s nice is in cab hydraulic connect with locking pins for attachments , very easy and quick , heated cab some with air cond , I sold mine to free up cash to buy the JCB teleskid 2TS-2T later this year , i used mine for my rental property business in PA
Those hammer flail mowers do good until the edges get blunt like anything else. They're reversible though and last decent if you don't mow nuggets, well I guess the hammers we ordered were reversible. You'll get one hell of a surprise the first time you shear the bolt on a flail ( i.e the reason it spins backwards) because it will spit that thing out a looong ways!! Then it's an eater egg hunt for the tooth and the bushings for it, I've only ran an old clapped out boom flail and tractor with hammers on our county roads and some forest service roads so you have to angle the boom back a bit when mowing brush so the hammers get pitched out into the woods instead of down the damn road at cars
My uncle used to have one of those mowers that was similar but the teeth were more triangulated on each side. Probably 3x wider that he’d run behind his tractor. Gave almost a golfcourse finish.
I'm with you the mini skid steers definitely beat dragging brush by hand but run one all day long and it's like riding a bull for 8 hours the way they buck in bounce in you have to hang on in sway with them Personally I have found a Bobcat T595 with a scrap grapple on the front is about the ideal setup for moving in handling brush the flat bottom bucket allows you to scrape the roads clean and load mulch and rake up as well as get up stump mulch and never have to change attachments. I can pick up sticks out of the grass without messing up the grass once you get used to the scrap grapple bucket And I feed the chipper with it all day long we almost never touch brush by hand anymore The 595 seems to be about the perfect size small enough to fit everywhere but big enough to still handle a good size log or tree top I load the dump truck with it with pulp logs as well. 90% of the time if we have to go through a gate we just set up the Crane in Crane the brush out so getting through a 36" opening is not that important to us
This machine looks pretty neat I would really like to run one and try it I don't think it would fit into our business plan too well but would still be fun to check out
I'd love to have one of these to replace my tractor I hate 3 point hitches and PTO shafts. And everything is better when your implements are on the front and you dont have to crane your neck around to see whats going on.
If your gonna brush hog with a zero turn I recommend 37hp turf tiger 2 with the pto drive and the thickest blades in the industry. We mow alot of ex hayfields with it. If sapplings over 2inch or crap tons over an inch the flail mower is better. For this application a z would kill it! I still want an Avant though. However just ordered scl1000
The problem with Ventrac is that they are fairly useless at anything other than mowing and small dirt work. The Avants are a lot more versatile with over 200 attachments.
Mowing that field would have been much better with the Ventrac. Both pieces of equipment have their place. If I had to choose one over the other, I would choose a Ventrac. They are amazing & highly productive. Also, beginning of video where this Avant is spinning in mud, a Ventrac with the dual wheels, would have just floated thru that muck no problem.
I don't understand why you didn't buy the Avanta 650. Not that much more money. Twice as much hp and almost twice the top speed. Having said that, this is a quality machine and not some ventrac crap, for example.
Always love to see Avants in action!!
Great video... I just got the multi one loader. I like the avant machine but the multi one was 4 inches lower..That's a big deal with me because I'm able to drive into garages with no problem. I'm especially thankful for the knowledge I've been getting from your channel. Keep up the great work and have a productive and enjoyable day.
I have avant 528 i hate the height. Thinking about cutting the roof
Cool little machine keep up the good work and stay safe out there.
The flail mower seems to be between a bush hog and finish mower. As for moving branches after I drop a tree, I use a 6' landscape rake on my 37HP tractor. I drive straight into a huge pile of limbs in H1, drop the rake and never stop moving. Sometimes branches will snag the throttle linkage but that just makes things interesting. I can straddle small trees and use the rake to snag the trunk or for larger ones I keep a chain attached to the boom of the rake. The rake is the only attachment I purchased new and for around $500 it was well worth it! Keep in mind that this is in my own yard or sometimes for a neighbor and not for hire.
I had two Wacker Nuesan WL wheel loaders , A 30 and 32 , similar to avant approx 48” wide loved them in particular the 32 , bought used from rental co with very low hrs , like 200 hrs 35K , what’s nice is in cab hydraulic connect with locking pins for attachments , very easy and quick , heated cab some with air cond , I sold mine to free up cash to buy the JCB teleskid 2TS-2T later this year , i used mine for my rental property business in PA
A friend has a JCB teleskid.
It is an animal!
We call it the fat guy skid loader because of the side entry door.
Oh, and because we are fat.
Those hammer flail mowers do good until the edges get blunt like anything else. They're reversible though and last decent if you don't mow nuggets, well I guess the hammers we ordered were reversible. You'll get one hell of a surprise the first time you shear the bolt on a flail ( i.e the reason it spins backwards) because it will spit that thing out a looong ways!! Then it's an eater egg hunt for the tooth and the bushings for it, I've only ran an old clapped out boom flail and tractor with hammers on our county roads and some forest service roads so you have to angle the boom back a bit when mowing brush so the hammers get pitched out into the woods instead of down the damn road at cars
That's awesome great follow up review video 🤘
What a Kool machine 😎👌
I'm looking at an Avant 423. It looks small enough that I could haul it with my minivan and be under USDOT thresholds.
My uncle used to have one of those mowers that was similar but the teeth were more triangulated on each side. Probably 3x wider that he’d run behind his tractor. Gave almost a golfcourse finish.
The flail mower is a beast
I was hoping to see Callahan doing that mowing. Time for that boy to start earning his keep LOL. I see Boone was training V-Belt on the blue machine,
J'ai un 420. C'est un vrai bijou. Je ne peux plus m'en passer. Je fais tout avec. Vraiment de très bonnes machines
I'm with you the mini skid steers definitely beat dragging brush by hand but run one all day long and it's like riding a bull for 8 hours the way they buck in bounce in you have to hang on in sway with them Personally I have found a Bobcat T595 with a scrap grapple on the front is about the ideal setup for moving in handling brush the flat bottom bucket allows you to scrape the roads clean and load mulch and rake up as well as get up stump mulch and never have to change attachments. I can pick up sticks out of the grass without messing up the grass once you get used to the scrap grapple bucket And I feed the chipper with it all day long we almost never touch brush by hand anymore The 595 seems to be about the perfect size small enough to fit everywhere but big enough to still handle a good size log or tree top I load the dump truck with it with pulp logs as well. 90% of the time if we have to go through a gate we just set up the Crane in Crane the brush out so getting through a 36" opening is not that important to us
This machine looks pretty neat I would really like to run one and try it I don't think it would fit into our business plan too well but would still be fun to check out
love the intro tune who is it by?
Green Goblin 😳😂
What are your thoughts on square body Chevys
I'd love to have one of these to replace my tractor I hate 3 point hitches and PTO shafts. And everything is better when your implements are on the front and you dont have to crane your neck around to see whats going on.
Good points.
I think a yard like that with the grass no taller then it is a zero turn would make that job a lot faster and easier and would look better too.
Will a zero turn load a dump trailer with brush?
@@VBELTandSON I have to say no, but you wasn't loading a dump trailer. I was talking about mowing.
If your gonna brush hog with a zero turn I recommend 37hp turf tiger 2 with the pto drive and the thickest blades in the industry. We mow alot of ex hayfields with it. If sapplings over 2inch or crap tons over an inch the flail mower is better. For this application a z would kill it!
I still want an Avant though. However just ordered scl1000
how well does itg work on a 220? ;)
The MultiOne is a copy of the Avant like you said. Build quality is better on the Avant.
I’ve never used a loader to mow. So do you put the boom in float position?
Between the mower and the loader-arm are 3 linkages so the mower can float
WHAT was the Price ? Did it include the mower ?
Hi, I bought Avant 528 in 2016, good machine. Why do You have black side panels. It's some kind of paint or sth?
Rhino bed liner is painted on. Mine has the same thing
👍👍👍👍👍👍👍👍👍👍👍
Would you go with avant- or ditch witch 1550?
Avant. 100%
What dealer did you use been trying to find on but I can’t find anything on avant
Global machinery
I wonder how that machine would compare to the Ventrac?
Send a link for the one you are talking about
@@VBELTandSON www.ventrac.com/products/tractors/4500y shows their website down atm but many youtube vids
The problem with Ventrac is that they are fairly useless at anything other than mowing and small dirt work. The Avants are a lot more versatile with over 200 attachments.
Rather have one of these than an overpriced Ventrac with belt drive attachments lol
Mowing that field would have been much better with the Ventrac. Both pieces of equipment have their place. If I had to choose one over the other, I would choose a Ventrac. They are amazing & highly productive. Also, beginning of video where this Avant is spinning in mud, a Ventrac with the dual wheels, would have just floated thru that muck no problem.
πουλατο και κρατα το μπλε ειναι καλητερο 👍👀👍
i love your videos!! i have a question, can you transport a excavator and mini loader in a gooseneck trailer??
Yeah I’ve done that a few times
@@VBELTandSON i like see that!! tnks!!
To be honest I would rather get one of these for personal use instead of a skid loader
100% agree with you. These loaders are great
A zero turn would have been much better and faster for that fine of grass
But I can’t use it load a truck. And can the zero turn take out 5 foot berries?
I don't understand why you didn't buy the Avanta 650. Not that much more money. Twice as much hp and almost twice the top speed. Having said that, this is a quality machine and not some ventrac crap, for example.
Maybe I will buy the 650.. this was a demo machine….🤷🏼♂️
Avant is the original and all others are copies and not quality. This is a Finnish quality and not US or China crap.
Lol how many machines do you own?
I think a yard like that with the grass no taller then it is a zero turn would make that job a lot faster and easier and would look better too.