Cylinder 1 Misfire P0300 P0301 2015 Dodge Durango

Sdílet
Vložit
  • čas přidán 6. 09. 2023
  • Ended up being bad spark plugs, just replaced them all.
    Buy spark plugs here: ebay.us/R8MMrh
    Buy intake gasket kit here: ebay.us/jjW85Q
    Buy goggles here: s.click.aliexpress.com/e/_DFm...
    When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network
  • Auta a dopravní prostředky

Komentáře • 14

  • @thisguyshorty3554
    @thisguyshorty3554 Před 4 měsíci

    1st time Penstar owner. I saw a video on changing plugs. PITA!

  • @connorwilliams2335
    @connorwilliams2335 Před 5 měsíci

    My 2014 Durango is making a knocking noise kinda how you described the Chevy cruzes I was thinking it was misfiring , which is why I was watching this vid but now that you said that about the spark plugs that’s probably the problem

  • @valancesmith4617
    @valancesmith4617 Před 10 měsíci +1

    Where is the next video?????

  • @ssclonesilverado5606
    @ssclonesilverado5606 Před 4 měsíci +1

    I have the p0301 code and have some shaking while on idle, would changing spark plugs and coils fix that issue?

    • @Tech-28
      @Tech-28  Před 4 měsíci

      It could, but you would have to either diagnose it yourself or have a technician diagnose it to be 100% sure. If you are able to have someone scan it and erase the fault codes and then mark and move the ignition coils around to different locations, if the same code comes back than you know it’s not the coil, if it’s the cylinder you just move coil #1 too than you know it’s the coil

  • @executiveshades
    @executiveshades Před 10 měsíci +2

    Thanks for the video bro, So I'm having the same exact issue and code but only says cylinder 1 misfire so i changed out all 6 spark plugs and continues to give code after i clear and runs bad at different times then doesn't, Do you think motor is shot? or like a bad Cam

    • @Tech-28
      @Tech-28  Před 10 měsíci

      Did you try moving the ignition coil packs from cylinder 1 to cyl 3 and vis versa? Also could be a roller failure on the camshaft, seen those go bad a lot

    • @charlieboy501
      @charlieboy501 Před 8 měsíci +1

      Could be the coil

  • @mohammadawwad839
    @mohammadawwad839 Před 3 měsíci +2

    Does this work for 2018? Have a cylinder 5 misfire

  • @user-jt9ft6ge7y
    @user-jt9ft6ge7y Před 6 měsíci

    Do you know where is cylinder #4 on a dodge Durango 2016 v6 3.6?

    • @Tech-28
      @Tech-28  Před 6 měsíci

      I’ll look in a bit, if I remember correctly it’s on the drivers side center cylinder

  • @AVMAR
    @AVMAR Před měsícem +1

    Did you find the issue?

    • @Tech-28
      @Tech-28  Před měsícem

      Yeah it needed an ignition coil and a set of spark plugs