Dodge 4.7 p0300 randommisfire FINALLY FIXED! 300k and running like a dream!

Sdílet
Vložit
  • čas přidán 9. 08. 2021

Komentáře • 58

  • @nostradamus4828
    @nostradamus4828 Před rokem +18

    Morale of the story : "If you want it done right ,do it yourself" 👍

  • @rholandus
    @rholandus Před rokem +2

    Thank you for sharing your two year ordeal! Mine is just starting with very similar symptoms!

  • @AlbertCanales
    @AlbertCanales Před 6 měsíci

    I have a 2002 Ram 1500 3.7, manual transmission. I've been fixing/replacing parts to keep my truck running. Got some misfires after replacing spark plugs.
    Thanks for the information!
    Gaskets and EGR... 👍👍👍

  • @sheliastewart6224
    @sheliastewart6224 Před rokem +3

    Thank you, it helped me. I have a 05 dodge ram. Getting a complete tune up done.

  • @SuperTruck1
    @SuperTruck1 Před rokem

    Mightve just helped me!!
    I washed my motor the other day..let it drain off while washing the truck. Two days later...she farts and pukes with 2,6,8 and 300 misfires 🤦‍♂️ thank you for giving me a start point

  • @gdcatalyst7812
    @gdcatalyst7812 Před 2 lety

    Glad you figured her out. Ive got an 05 as well with 217k and it just tossed me an EGR circuit high voltage code. This morning the check engine light was back off again so i wiped the codes and im going to wait and see if it comes back. I have a new EGR valve for it, but im not going to put it on if its working fine. Im crossing my fingers it isnt something stupid like an intermittent short in the harness to the valve. we shall see!

  • @centurian318
    @centurian318 Před rokem +3

    The misfire codes I got were cyl, 3, 5, and P0300. Turns out all the filters had collapsed and tossed the rocker arms for cyl, 2,3, and 5. Found all three rocker arms in the head.
    Used a small 10mm combination wrench and put a 90 degree bend on it and used it as a lever to remove the other rockers and replaced all 18 lifters.
    Removing the brake booster on the driver side helps a lot.

  • @jorgesausedo8233
    @jorgesausedo8233 Před rokem

    Having same problems changed the plugs ran fine for 3 days and then started to spit and sputter. Thinking about changing the coils idk when was the last time the coils were changed. I'll check the EGR VALVE. I HAVE A LIL BIT OF BLUE SMOKE SOMETIMES WHEN IM PARKED AND HAVE THE A.C. ON FOR ABOUT 3 TO 4 HOURS AND WHEN I TAKE OFF I CAN SEE LIL CLOUD OF BLUE SMOKE FOR A COUPLE 100 FEET THEN RUNS GOOD.

  • @brittanyjohnson2313
    @brittanyjohnson2313 Před rokem +2

    I appreciate this video. I'm going to check all of my gaskets now. I have a 2010 1500 4.7 and have been battling it for months. I have changed plugs, plug wires, ignition coils, the throttle body, crank and cam shift sensors, temp control sensor, both 02 sensors and have had zero luck. Mine misfires and keeps throwing the red lightening bolt light. I'm at a loss and am sick of dumping money into it with no results but I still owe $11,000 on it. Damn vehicles 🤬

    • @Devo1987
      @Devo1987 Před rokem

      Did you figure it out?

    • @MidnightPolaris800
      @MidnightPolaris800 Před rokem

      Did you have it reprogrammed after new throttle body

    • @Devo1987
      @Devo1987 Před rokem

      @@MidnightPolaris800 diyou figure out the problem ?

  • @MACGRUBER5000
    @MACGRUBER5000 Před 2 lety +5

    ur uncle sounds like he learned from a dealership 🤣

  • @peytonmoore3536
    @peytonmoore3536 Před 2 lety +1

    holly shit man i really hope my dakota is having the same problems, i really hope my solution isnt gonna take all that lol. thankyou you really help me out.

    • @carlosalday3486
      @carlosalday3486 Před 2 lety

      Im having the same issue with my 05 dodge ram and we already changed all the sensors even the computer.. spark plugs and coils and nothing it still not working

    • @Ktorome
      @Ktorome Před 11 měsíci

      @@carlosalday3486did u ever get it fixed

  • @6288muckaluck
    @6288muckaluck Před rokem

    Thank you for this! I have the same exact truck with the same damn deep molten red color. I'm about to go through all my gaskets now that we just rebuilt this motor 6 months ago.... It just put the 0p300 code so hope i catch it quick.

  • @derekamanwiththegivennamej1082

    So was your egr stuck open or closed or just the bad gasket? Also was ur misfire code intermitent or constant?

  • @imax3d252
    @imax3d252 Před měsícem

    Just bought a 2003 4.7 and it is missing like crazy only code is that p0300 and it is such a pain in the ass trying to find out why it’s happening just ordered new coils and plugs hoping that helps it out

  • @keithgrant4288
    @keithgrant4288 Před rokem

    You're a good man..lol wow your uncle

  • @MidnightPolaris800
    @MidnightPolaris800 Před rokem +4

    Those 4.7s are good engines if they are driven to operating temp once a week to burn off condensation in the oil

  • @scottsmith8934
    @scottsmith8934 Před rokem +1

    My misfire on my 03 4.7 dodge 1500 was just the spark plug. Even tho I change all the plugs and coils 9000 miles ago..

  • @charleslemon9840
    @charleslemon9840 Před rokem

    What socket did

  • @337Brian
    @337Brian Před 2 měsíci

    I have the exact same year and engine size. I think I have a vacuum leak. I gotta do a smoke test

  • @Efectoeficaz
    @Efectoeficaz Před 11 měsíci

    So it was the egr gaskets

  • @michaelmedeiros2089
    @michaelmedeiros2089 Před rokem +2

    Thank you for sharing this might help me. I have the same P0300 code and every morning when I go to start the truck up the check engine light starts flashing and the engine runs like crap for a minute or two even if I mash the gas it won't really do anything. Once the symptom goes away the truck runs perfect. I really hope it has something to do with the egr or some vacuum leak. Thanks again man.

    • @timothygarza3699
      @timothygarza3699 Před rokem +1

      Did it work? What you’re going through is the same as mine

    • @Tripp77
      @Tripp77 Před 9 měsíci +1

      Wondering if it worked myself..

    • @timothygarza3699
      @timothygarza3699 Před 9 měsíci

      @@Tripp77 I figured mine out. I replaced all my coils and spark plugs. I got all 8 coils for 86$ and the sparks as well for. The spark are on sale for 10$ for 4

    • @Tripp77
      @Tripp77 Před 9 měsíci +1

      @@timothygarza3699 thanks. I just replaced all mine last year but it's acting like an intake leak.. haven't had time to look yet.. just trying to rule stuff out online. Guess it would hurt to test coils just in case again.. my model doesn't even have an egr valve so that's ruled out..

    • @timothygarza3699
      @timothygarza3699 Před 9 měsíci +1

      @@Tripp77 yeah I found out mine didn’t either lol. Let me know how it goes

  • @1smokeyj350
    @1smokeyj350 Před rokem +1

    I’ve replaced all those parts and installed gaskets still ruff idle gas smell I’ve done every sensor/plugs/coil packs everything

  • @lineylac7044
    @lineylac7044 Před 4 měsíci

    I can't find it

  • @kennethrutledge9222
    @kennethrutledge9222 Před 8 měsíci

    Well ,, I got sumthin similar to y’all’s symptoms on the 4.7

  • @brianveitenheimer4492
    @brianveitenheimer4492 Před rokem +2

    Can’t blame your uncle. He was probably sick and tired of that job by the end. Heads on 4.7s is a long shitty job.

  • @jjheape4378
    @jjheape4378 Před 20 dny

    You sound just like Chris Farley

  • @finnsander3333
    @finnsander3333 Před rokem

    Hey, im not good in English can someone tell me , what the problem was and how he solved it ? Thank you

  • @airsevens
    @airsevens Před 2 lety +1

    😭😭😭✨

  • @javiermagdaleno8345
    @javiermagdaleno8345 Před 3 měsíci

    👍✌️💙🏇🏇🏇

  • @ozerhar0410
    @ozerhar0410 Před 11 měsíci

    Why does my ram consume so much oil

    • @hotwheelsracer6380
      @hotwheelsracer6380 Před 5 měsíci +1

      Your PCV valve is bad. If its a 4.7, It sits on the oil filler where you pour oil in. Its on its left side it just twists in with a hose on it. It’s a pretty cheap part and should hopefully fix your problem. Best of luck!

  • @fadergofast5781
    @fadergofast5781 Před rokem

    P03 is code for its cylinder 3

  • @johnjacobs3502
    @johnjacobs3502 Před 5 dny

    .......