My Ultimate 4x4, Kenda Tires & Keizer Wheels
Vložit
- čas přidán 29. 08. 2024
- Ultimate 4x4, part 4
In this fourth episode of My Ultimate 4x4 I race-test my tire and wheel choice, which is four Kenda Bearclaw HTR tires, (all 25x8x12), bolted to 12x6 Keizer Beadlock Wheels (Front: 5+1 offset, Rear: 4+2 offset) , and I talk with XC1 4x4 Pro Jordan Phillips, who runs my exact same tire and wheel set up.
This is part 4 of my new “Ultimate 4x4” video series. From cross country racing, GNCC competition, work-duties in the yard, trail-riding with buddies to a 4000 mile coast-to-coast trip on the Trans American Trail - I'm doing it all with my 2020 Yamaha Grizzly!
My Ultimate 4x4 Upgrades for the Yamaha Grizzly (List in Progress):
Barker's Dual Exhaust System with Quiet Core
EHS Racing Complete Air Intake System
EHS Racing EFI Controller
AIS Delete by EHS Racing
Kenda Bearclaw HTR Tires (25x8x12)
Keizer 4x4 Single Beadlock Wheels (Front: 12x6, 5+1. Rear: 12x6, 4+2)
Keizer 12" Gloss Black Wheel Covers
Plastic Glide Plate (Genuine Yamaha Accessory): PN: B16-F84N0-V0-00
Rear Grab Bar (Genuine Yamaha Accessory): PN: B4F-F85E0-V0-00
Front Brush Guard/Bumper (Genuine Yamaha Accessory): PN: B4F-F84L0-V0-00
Yamaha Adventure Pro for Grizzly (Genuine Yamaha Accessory): PN: B8K-H21G0-V1-00
Yorwe Anti-Slip Grip Tape: amzn.to/3m4X03C
3M Super 77 Spray Adhesive: amzn.to/2VWq6Y1
XCEL Neoprene Foam Handlebar Padding: amzn.to/2K8UGuP
Rox Speed FX 5" Riser Kit: tinyurl.com/vn...
Fasst Company Flexx Low Bend Handlebars: tinyurl.com/4n...
Fasst Company Super T Handguard Kit: tinyurl.com/2u...
SSi Decals Custom Fender Protection Kit
Moose Racing Foam Handguards
McGill Mafia Mitts Custom Handguards: tinyurl.com/km...
Do that cross country trip!!! Very inspiring! Would love to do that too. Biden sucks!
Made a similar project....albeit...more on a budget, with my 2014 BruteForce 750. Its amazing what some mods do to these 4x4s. I did Elka stage 3's, Rox handlebar setup, Tusk Bighorn copy tires and clutching.
Watching this just makes me love my Grizzly even more. I couldn’t be happier with mine!
My wife and I are waiting for the next episode and the great Tour your re planing. See you soon
I've learnt more about quading from this channel than anywhere. Thanks for sharing your expertise.
Thanks so much for the awesome compliment!
Liking this series 👍🏽 those wheels look badass. I’d say you’ve built a well rounded machine with performance and comfort in mind. Looking forward to see your suspension upgrade and whatever else you’re planning.
Nice series on the griz. Been eyeballing a few of them, just not pulling the trigger on anything as of late. I race a raptor 700 right now so the griz would make a great companion.
I like what you have done , ,, I’m sorry a little behind on atvs im just getting back in to it after about 9 years of being out of the atvs
I agree with your predictions with the toys under our puppet in command
I feel ya, but then again I also predicted Trump would get the most votes in US history and win 48 states, (actually he very well may have). Who knows, I could be way wrong and RV prices will go even higher, nothing surprises me anymore.
Make Some More VIDEOS!! Keep Them Coming Love Your Vids.
I have a 2019 KingQuad 750 with Kenda Bearclaw HTRs. I originally wanted a Grizzly but they never go on sale, happy with my KingQuad though.
Great video, glad I found you. 👍🏻
Squared tire setup dope
Can't wait for the new episode, I have the same color 2019 grizzly🔥 definitely gonna take the tires and exhaust and tune from you waiting for the suspension tips 💪🔥
thanks much. Elka shocks for the win! It's incredible how much they help our Grizzlies.
I'm only 10 minutes in but have to say that I agree with your setup completely. I don't know yet if you mentioned it but you've also reduced unsprung weight which is a good deal for your components as well as acceleration. Whatever you've lost in contact patch area you've made up for with the increased PSI of the reduced contact patch. In the vast majority of situations, we both know that your narrower rear tires won't leave you wanting for more traction.
I've only heard great things about the Bearclaws but I'm not sure they will work better or ride smoother than my Bighorns here in the Rockies but I like the idea of 8 plies (the Bighorns are 6). I have 27x12 Bighorns on one of my Grizzlies and stock 27x14 Zillas on the other one so maybe I'll try some 14" Bearclaws soon. Both have the tuners but no Elkas yet!
Awesome description. Yeah hate to say it (since it may cost you good money) but if you can get Elkas go for it. It's amazingly better than stock, and I only have the front so far!
you can buy a traction gripper max its bsically a 8ply big horn
Bearclaw HTR are great overall. Just keep air pressure I would say 5 or even 4 psi. They are little skittish on slippery rock when air pressure higher. They steer like they are on rails at speed. In snow with lower air pressure they stay on top of snow pretty well. I worked them hard on everything with my 650 outlander.
great info. thanks. I think I agree, I was running 8 pounds (scared of a flat), I thought they were perfect, but went down a little and they were even better. I'll probably compromise this year at 6 or 7, I'm not planning on any run-flat protection, so more air I think I'm less likely to get a flat.
Let's go Brandon!
Great videos, I found you last summer but I'm not always quick to subscribe till I see all the videos and look forward to more so I went ahead and subscribed today to look forward to your 5,000 mile track across the country. When are you going on that adventure?
Thanks for writing. Yeah the TAT ride is still a go, but I've been racing a sport quad and an eMTB in the GNCC series, I figure I need to get that out of my system first before I'm too old to do it. This will probably be my last year racing and I'll ride across the country next year.
I see you haven't posted a video in a long time what happened ? Hope all of well hope to see you do more soon
Thanks for writing. The next one will be in the Fall, (all about suspension). I've been having a blast racing a sport quad, three wheeler and a mountain bike all summer.
Do you think I should go with the base model Grizzly 700 with 12'' wheels instead of the XTR / Se package with 14'' for all around trail riding and mostly hard pack XC? I Don't really do deep mudding.
You'll be happy with either one. I like the 12" wheels for better handling but you'll have a little more ground clearance with the 14" wheels. Most riders seem to prefer 14" wheels.
Great work proving “seasoned” technology is still relevant and that new isn’t always better! Question on your wheel offsets… it may just be the camera angle but could you have gone a half inch wider and still kept the rubber flush with the fenders? I just bought 2 Grizzlies and want to ditch the tractor tires and run your setup. Thanks!
Sorry for the delay. I squared up from the floor, and yes the tire is inside the fender by exactly one half inch, both front and rear.
Need an update on the grizzly!
What happened to you ?
The trans American trip sounds like a great ideal. I'm interested
My friend passed away, ended up racing every round of the GNCC on a sport quad in his memory. I'll get back to my ultimate 4x4 this year. As for the TAT ride, I'm still going to do it, maybe this August if I can get the funds together.
@@ATVScene Sorry to hear about your friend and what a way to honor him. You helped me make the decision on a Grizz after all the shopping and research. Looking forward to your vids in the future to help me get into some long(ish) rides in the PNW.
@@REJ509 Awesome Thanks much! I think it's the best all-around-ATV ever made - glad to have helped make your decision. Love the PNW, what a great place to ride.
ATV Scene, swap out the grizzly's seat for the kodiak 700 it's a couple inches lower for better handling.
I didn't believe this until I compared the part numbers. Looks like you're correct. Strange that Yamaha would build two different seats. I hate to give up my comfy seat, but I would like to compare the two. Thanks much!
@@johnpellan7204 thanks to you for sharing good videos.
Got a few questions
1) Will the off set you used work on a 2023 grizzly se
2) Are you still going to do the trans american trail
3) Your thoughts on running 26x9x12
Yes the 23 is the same Grizzly as mine. Yes I plan to tackle it still. 26x9x12 us a great choice too, and I think the wider tires look better on the Grizzly than my narrows do. I like my 8x12 mainly to be able to better avoid deep ruts that form at GNCC races and there's a little less rotating mass. But 26x9x12 is a great choice, you won't be disappointed.
Hey how's it going with the grizzly....haven't seen any thing lately thinking about doing the same tire and wheel set up just wondering if you still like it ??
I love the tire wheel setup. I haven't ridden my Grizzly much. I've been racing my sport quad and emtb lately. I will have future episodes though, just not timely ones like most youtubers :)
How would 5+2 rims handle do you think with either a 26x9 or 25x8 setup? Would the width still work you think in terms of front vs rear and not negatively impact handling? Very limited on option in terms of wheel offset. If I go with 26x9 I get more options as that is in 14 inches. I will be going with CST stags as they do great with studs on ice and snow for our winter trails in Canada. Keep up the great content with the Grizzly!
Everyone wants 14" wheels so that's what most wheel makers concentrate on. For ice and snow a slightly wider footprint may put provide just a tad more traction from the studs, so you may be on to something with the 5+2 offset with 26x9 tires but for just about all other terrain I think I would prefer my exact set up, I love it.
@@ATVScene thanks for the reply. I am heavily leaning towards 5+2 all around with 25x8x12. Just looking at what I can find in stock...crazy time.
@@denischartrand3912 12" will be hard to find unless you order from Keizer. Mine came pretty quick and I love them. Not likely but you should also search ebay for a set of leftover HiPer Wheels.
How do you start your grizzly for the dead start races? Are you able to start in gear? Im doing my first race in about a month. I have a Kodiak 700.Thanks.
Put it in gear and hold the brakes it'll fire right up
What happened to the next parts of these videos?
they're coming, probably still this year. I've been racing a sport quad and mountain bike all year. I'm working on a custom rear bumper system that ties in the shocks, rear rack and more. Lots to cover.
@@ATVScene looking forward to it man. Short videos covering one topic are good too. Maybe even better! I bought and built a grizzly after watching your first couple videos. Only recreation though. Several videos on my channel. Thanks for all the ideas!
What are you thinking about making it road ready for the TAT? I would love to ride with ya. 2018 Kodiak.
Thanks for writing. I've poked around a little but haven't narrowed down the mods for yet. The blinkers will be LEDs to match Yamaha's sharp LED lights. This winter I'm fabricating a rear bumper / rear shock reservoirs solution and rear dif brace. Once this I can start to think about the street legal stuff. I think I want the front and rear blinkers in the bumpers, rather than mounted to something.
I'm all about finding people to ride sections with me, so yeah. Let's keep in touch.
Any updates on this rig?
Did you make a video on upgrading the suspension?
Not yet. I have one more mod I need to make (fabricating a rear bumper to protect the remote shock reservoirs. I do have Elka Stage 5's on all corners, and the ride is absolutely incredible.
You had no problems with 12" 4+2 hitting the rear brakes?
no problems at all
Did your grizzly originally come with 25 or 26 inch tires and are you saying that your new tires that are 25s are equivalent to the stock 26 inch tire thanks
Exactly. The 26 inch Kendas measure the same as the OEM tires that come on the Grizzly
I thought he said in the video that he bought 25 inch kenda tires And that they were the equivalent to the stock 26 inch tire
we are cut from the same cloth in how we think.
25" Kenda Bearclaw HTR are the same height has the stock 26's?
yes same height
My 2016 grizzly 700 had 26" tires. Measured just under 26" never heard of anyone breaking rims? You will not Handle as well with skinny tires on the back. Wider tires will go over the ruts better.
Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
I recently (11/20/2021) bought a Kodiak 700 EPS SE. The intended use is on our 12 acre homestead. After watching these series of your build. You confirmed my purchase. I didn’t like the dealer I got it from. Had Cali not passed some B.S ban on the new sell of ATV,UTV,dirt bikes, etc (starts Jan 2022). I would have held off. I haven’t owned a ATV since early 90’s. So I’m new to these. Thanks for the content.
And yes. Our economy is going to tank way worse than 2008. Banks are doing shady loans again. Car repos are in the multi millions, and this fake elected president, is sinking this ship. It’s only going to get worse after Biden. And more Kung flu variants.
What ban is coming in CA Jan 2022? Is it an even stricter CA Emissions? Noise? Anti-combustion engine?
Yeah I think you may be right, the bottom is about to drop, but I predict we recover better than ever. Many illinformed people are finally realizing they were duped and there really is a deep state that is trying to transform America and the world.
I’m sorry. Typo on my end. Ca passed a bill 2 years ago on ATV, utv, side by side, etc under this C.A.R.B “thing” for cleaner air. No longer will certain machines be available in 2022. I don’t know all the details off hand. I spent some time reading the bill 3 months ago when I was informed of it. The wording in I just couldn’t wrap my head around. But this year they passed a small cc ban that takes place in 2 years. No gas powered chainsaws, lawn mowers, weed eaters, leaf blowers, etc. that was a 1200 page bill I did read.
What you hear coming outa Cali is not just Fox b.s. I have a business here & live it. However, there’s a lot of normal folks here. I’m a fellow Midwestern (Iowa & Minnesota).
@@07negative56 crazy. I have a bunch of friends in CA everyone I know is fed up with the crazy liberalism. What a shame, they're ruining one of our prized states.
Good luck and well done on getting that Kodiak. Go turf Newsome's yard with it :)
I’m a fed up Marine with means. Just trying to make the best of it. We’re over due for some things. Thanks for the dialogue. I appreciate ya.
Where do you go?
I've been racing mountain bikes lately. I'll get back to this though, and I'm still slowly planning the TAT ride too.
@@ATVSceneGood news!
How do you compate it to renegade and scrambler
I like it way more than both of those ATVs. I think it's the best 4x4 ATV of any.
@@ATVScene can you maybe make a video elaboritng why?? Is it as fast as those two? Reliability? Handling? Looks?? Jumping??
@@cirbar3467 I think part 1, 2 and 3 of this video series does a good job of explaining why I think that.
Thankyou ill check them out
What’s up with hyper?!
I don't have all the details but bummed. I loved their wheels, light and strong.
Let's go Brandon!