Video

I just did some consulting for a cannabis packaging company who was using the L801. Yes, it’s a good printer for that. Make sure you clean and maintain it on a regular basis. You are limited with the finishes to straight CMYK printing on a handful of media but it gets the job done. They also had the finishing system which is a must for labels in my opinion.

I have a video coming shortly that goes over using barcodes from start to finish

@@graphicinsights466 Thank’s

Thanks so much!

Hi, thanks for reaching out. The CE6000 does have the ARMS sensor on it and can read crop marks but Graphtec no longer guarantees it from CutMaster5. According to Graphtec - make sure that your cutter firmware is 1.40 or later and change the setting of CONDITION PRIORITY from MANUAL to PROGRAM in the TOOLS SETTING menu. Your guaranteed way to use the CE6000 is to download Cut Master 4 but you will also need to use an older version of Illustrator. The previous instructions should work for CM5

@@graphicinsights466 thanks you sir but I'm now in problem, I format my cutter, and uninstall cm4 And install but my file not send to cut, job show in hold box if possible help me resolve my issue 🙏

Can you try and resend the cut file? And make sure that you test the connection between CM4 and the cutter especially if you reinstalled it.

Thanks for the comment. Typically the more expensive printers offer better support and a greater success rate. Also, thanks for the suggestion about selecting a printer. I can certainly give my opinion of which printers are better and why.

@@graphicinsights466 That would be very helpful. And honest review and will help me a lot. Thanks!!

DILLI is great. Cost a bit for 10' hybrid $160k usd

For a UV Flatbed printer it is...

I know it can be sticker shock, but there are commercial flatbeds that start at $500k and industrial ones for more than $1.5M

​@@graphicinsights466 For those who aren't exposed to the volume part of the print industry (where my print business sits) 100k on any equipment labelled entry level sounds absurd. I was a little surprised the Canon 135gt didn't make it to the list, but i'm unsure of the retail price in the US.

Agreed. I just put a video out mentioning the Canon printer. I believe the cost was around $150k

We live in a world where a pickup truck costs 100k. So a wide format UV printer that is delivered, set up, calibrated, with full parts and service warranty, with two days on site training, and helping purchaser setup first production runs, for 100k, well, that is a far better value than aforementioned truck.

Thanks for the comment!!

Extremely annoying!

@graphicinsights466 • 0 seconds ago I think the Mimaki with the LUS-120+, LUS-150+, LUS-170#+, LUS-175+, LUS-200+ flexible ink would give you the best results. I would absolutely ask for a sample or provide Mimaki or a dealer with the material you want to print on for a sample to ensure the adhesion and flexibility will work for you

I think the Mimaki with the LUS-120+, LUS-150+, LUS-170#+, LUS-175+, LUS-200+ flexible ink would give you the best results. I would absolutely ask for a sample or provide Mimaki or a dealer with the material you want to print on for a sample to ensure the flexibility

I think the BN2-20A is a great all around machine that allows you to create professional looking graphics and stickers in a compact size. You can’t go wrong with that printer.

You should be able to print on both I would suggest the Mimaki Flexible Inks: LUS-120+, LUS-150+, LUS-170#+, LUS-175+, LUS-200*# or the Thermoforming Ink: LUS-350flexible ink set. I would strongly suggest sending your samples to a dealer or manufacture to print on your exact item for a definite answer.

Thanks for the question. It depends on what the packaging type is. All media manufacturers have a standard vinyl for cardboard or paper type products. If it’s a low energy surface like plastic I would recommend Arlon DPF8000 ultra tack or similar. If it’s a food product then Eco-sol ink should not be used on any media as it is not a good safe ink. I can recommend more media options if you let me know the packaging type.

@@graphicinsights466 hey man, Great information as always. A customer inquired about labels, this is for a filtered water company. Does that mean eco-solvent is not safe for that ? If not what type of printing is good for that ?

@raygangibbs3762 if they’re going on a the filter themselves I would say no but if for the box they come in and the filters are individually wrapped, I would think it would be fine.

@@graphicinsights466 The label would be going on the bottles that the water is going to go in

Yes they do! Smaller bed size and CMYK,W no clear and 4” opening compared to 8” but can print on everything the other can if it fits on the bed. I have it in a video here Unlock Profits: How Roland’s New Desktop Devices Revolutionize Product Customization! czcams.com/video/lgmwN7HiGLg/video.html

Hi, thanks for the question. The typical sizes of Eco-SOL printers are 30, 54 and 64". I would recommend a 54" or 64" printer. You have more media options with 54" and if you want color going to the edge (bleed), then you will need to print larger than 48". If you think you might expand to stickers or other types of graphics in the future, I would suggest the Roland or Mimaki. I lean towards the Roland with the 2 year warranty. If you don't need cutting, I would suggest the Epson S40600. It's a 64" printer that will will allow you to print wider if you ever need it but also offers the most balanced speed, color and price in an entry level machine. Good luck with your business!

There are a lot of variables, age of your house, current service (amps) coming in and is there room in the panel. It's best to print the electrical requirements out for the printer and call a licensed electrician to come take a look at everything.

All of them are capable but in my opinion it would be the Roland MO240 for photos. The red and orange ink will give you the widest color gamut, good balance of cost and features and it comes with a 2 year warranty.

@@graphicinsights466 thank you tour videos have been really helpful!

Roland has a BD-8 tabletop printer. I recently uploaded a video on Roland’s new desktop devices and that’s included in the group of equipment discussed.

Thanks for the question and subscribing. Yes, Roland MO-240, Mimaki offers the UJF series and the Mutoh XPJ461UF. Epson has released the V1000/2000 series but they are not available in the yet.

Thanks for the comment and video idea. I actually have one I’m working on that will be out shortly discussing laminates and other. Thing

Now that's really budget! Thanks for sharing.

I appreciate your insight and expertise on the JFX200 printers. It's awesome to have viewers like you sharing their knowledge. Yes, they are great printers. I'm certainly capable of making a mistake and I strive to put the most accurate info in my videos so I went back and double checked Mimaki's site and actually the 2513 (discussed in the video) does have 3 heads. It may be confused with the 2531 which only has 2 heads.

The new jfx200-2513EX does, in fact, have 3 heads. 2 cmyk heads, and a third head for clears, whites, and primer inks. In fact, the older nonEX JFX is no longer available new. Only the 3 head version is available in 2024 forward. Mimaki Dealer Tech

@@tomTrophy oh ok, I see! Thanks for the info!

Thanks for the congrats and the comment!

Thanks! Means a lot!

If you’re looking to print desktop size paper calendars than any desktop eco-tank type printer would work. If you’re looking to print large wall calendars then any Eco-SOL, Latex or UV printer would work. UV would offer the most benefits with its capabilities of gloss and matte options.

Thanks for the comment and the feedback!

I've had my Mutoh 1204 since 2010. Still running strong, i had to replace the head once, and that was earlier this year, (yes the original print head lasted 14 years), and replaced it myself with only a youtube video to help guide me.

Thanks!

Hi, thanks for the question. I have used the Roland and Mimaki. I’m comparing the others as similar ones in that same category.

@@graphicinsights466 Apologies if I came off accusatory. So much content on CZcams these days just seems to be paid for with no personal experience. This was my first time watching a video from your channel. I'll watch some more. Thank you.

@feldon27 no worries and I completely understand. I spent 20 years in distribution so although I haven’t used all of these printers I have received feedback from customers that have. On top of that I do a ton of research for every video to make sure I verify all the info. I’m not being compensated from any manufacturers and will always do my best to provide honest opinions and truthful statements when it comes to anything I review.

@@feldon27 need more people like u . im glad u asked and glad he answered win win

@@graphicinsights466 thank you

Thanks for the comment! I would recommend buying one with a couple of cautions. 1. Know that support will be difficult IF you need it. Make sure you can get parts for it maintenance and for repair. Also make sure that if it comes with RIP software you may be on your own to figure it out and if you can use a mainstream RIP software like Flexi or Onyx that the software manufacturers have drivers to support the printer. Other than those things I think the savings is worth it, you may have to put more effort into getting that it to work. I think you just gave me a video idea.👍 what printer are you considering?

@@graphicinsights466 Thanks for the quick reply.. haven’t really settled on any specifically but I’ve been eyeing the Grando Latex 3000

Thanks for the comment. Yes, they are expensive for sure. You can buy less expensive ones direct from China but you won’t get the support and training that comes with a local purchase. Spending that much money you definitely want to start making it back asap.

Are you interested in Chinese digital printer, such as 6090 UV?

Thanks for reaching out and the video suggestion. The dye-sub process that you mentioned is very cool and certainly worth a look!

Congratulations! It's a great machine.

Do you know If there is any difference between Mimaki 3042 and Mikaki 6042 besides the size ? @@graphicinsights466

I'm not sure what you mean. Do you want a video of how to place grommets in a banner? or can you be a little more specific.

@@graphicinsights466 lol garment as in clothing, sorry it was a typo . Do a video on the best eco solvent material to decorate clothing

Haha. Sorry I didn't pick up on that. That's a great idea!

@grapgicinsights466 Thank you for this in-depth and insightful video, making it much easier to find a place to start and for your detailed comparisons!

Thanks for the feedback!

I wish I could I know how crazy that is. I have been in this industry for over 25 years and it's always been the same with the exception of Roland. They offer a 2 year warranty on most of their equipment. I can tell you that if you follow the manufacturers guidelines and maintain the printer, it will last you a very long time and should not need service on a regular basis. Roland has printers that are over 15 years old that people are running everyday.