Video

Hello , thanks for your video =) . Do you know if a mod for the first Pokeball Plus exist ??? A autocatch mod + no vibration will be cool, instead of pressing the button (which doesn't always respond). Thank you =)

Ahoj, všimol som si že si zo Slovenska. Nerobíš tieto módy na objednávku? Celkom ma štve ako môj go plus vibruje a rad by som sa zbavil toho. Neverím si že by som ho vedel módnut sám takže radšej to prenechám človeku čo s tým na skúsenosti

Why didn’t you just slice the mesh?

I’ve seen people selling these modified version online is it worth it to buy one? I don’t have the skills to modify it myself or the tools

Nice work, I have a question, though. I'm only using it for Pokemon Sleep to track my sleep. My problem is that I'm almost always pressing the main button by accident. I want to use the switch to disable the main button entirely and re-enable it. Is it possible? Is the Main Button connection inside the flex cable? where should I cut the connection? I don't mind to scratch the mainboard.

Lo hice y cuando lo desconecto del móvil , se vuelve loco con luces azul y luego roja , si lo pongo en modo manual , no le pasa nada , es raro

Tried following instructions exactly as shown in the video but now the entire thing won't turn on. Don't know what I did to fuck it up :(

As of 5/9/2024 I had 0 experience. I ordered a side kit on Amazon and followed all these directions. 100% works!! Mahalo from Maui. I would highly recommend everyone to get the smallest wires you can and a really good pair of wire strippers

I'd like just to add, could you pin a comment or add in the description that if you connect the battery before switching the switch to normal mode, that the plus will start to run on loop on the pikachu sleep? I was under the impression that I had made a mistake at first 😅

Could you please make a tutorial for a full silent auto catching mod (no buzz ultra ball+no light) with a switch between that mode and normal mode, thank you! :)

Very good video! I did this mod and it works perfectly. Thank you! This was very helpful.

Thanks for the guide. I just need to wait for my solder kit to come in. I already got my PoGo ++ and easily opened it. I stuck dimming stickers to halve the LED light and it looks much better.

Thank you sooo much for both tutorial videos + reddit. I like how I can turn vibration on/off.

Old wired mouses have even thinner wires - perfect for this too.

I've done like the tutorial but doesnt work for me. I have disabled auto throwing. Seems like button is not activating. Any help?

It doesnt work for me. I just did the same and I have two modes, one with vibration and one without but the one suppose to be without doesnt throw ultraballs or superballs. I did the same as you. Tried to reboot sometimes

You sell these?

great video! is there any way to do this without a soldering iron?

Anyone notice its more buggy after doing the mod? Not catching as quickly and will have spurts where it just does nothing for a while even with pokemon or stops in range? My gf has been complaining about this after I modded it for her. I confirmed it does work and indeed does throw all 3 types of balls as well as regular red balls like it would normally with the switch in the off position as well as go into sleep mode still. This was on a newer plus + purchased about 2 months ago if that makes any difference.

How do you stop the viberation and sound, but still ensure autocatching with great and ultra balls?

Wo kann man den microswutch bestellen??

i just did this and it worked but not sure if the switch thing is working cause the center button doesnt respond

Just wanted to say thank you, I did it exactly how you described it and it works perfectly. You have to be reaaaally careful when first opening it up, I ripped that ribbon cable out because I was using to much force and opened it from the wrong side. Lucky it just came out and wasn't damaged, so I could put it back in. It is alot harder to do then it looks, but I'm bad at craftsmanship in general.

I tried this but connected directly without the switch and didn't work, any idea why?(I don't have the Pokemon sleep thing)

Hi!! is there any way to contact you? I am not very handy with electronics🥲 and I wanted to know if you can offer me the service €€ on two GoPlus+, I am in the EU so there should be no problem for fast and tax free shipping from Turin to Bratislava.

Can you link the switch?

can you get out of the loop by simpely pressing the pokemon go plus button on the app, so it will connect again to the pokemon go plus +?

What kind of solder did you use? I did mine and my wife's easy, but when i went to do the kids the wire did not want to bond with the test spot on the top board and it seems the solder burned out the connection point

Just tried to go the switchless method and as soon as connections were made ti just blinks non stop, any ideas?

how do you remove the battery

Can I just buy one off of you???

Where are people finding the small switches?

I also encountered the issue you brought up in your previous video: in silent mode, the Go Plus + attempts to go into sleep mode almost every time it is disconnected from the game. The only way to get out of this situation is to switch to normal mode, or connect it to the game and press the white button. In silent mode when it's not doing that Pikachu loop, if I press the top button to check the battery status, that also triggers it to go into sleep mode.

Have you noticed any impact on battery life after this mod? I did your mod and what I've noticed is a few minutes after fully charging the Go Plus +, the battery status LED is yellow instead of green when I press the top button. This happens with the switch in normal mode as well as silent mode. The Go Plus + is not connected to the game during the few minutes (less than 5 minutes).

Hey, how did you remove the speaker tabs. I did my own but could fit the speaker so I desoldered it to remove it. A friend of mine wants to keep theirs. Did you rip them off with pliers or sand them down?

It’s been a while. Aren’t there any versions of these we can get now that uses ultra balls yet?

Question: Is the switch necessary if you only want to have it auto catch?

Hey thanks a lot for the tutorial. While putting it back together the USBC cable to the "Mainboard" got loose. I reconnected it but it doesn't seem to charge anymore. Has anybody got a tip about what I might have done wrong? Thanks a lot

Hey, can I just clip both cables for both the vibrating motor and the speaker? And later work on getting the switch + solder to test cable? Or do I need to keep the vibrating motor + red cable in there for some circuit stuff that I don't understand (LOL)? thanks for the video by the way!

i was able to do mine a little bit scuff thank you so much man!

I want to do this mod myself but I can’t find the little switches does anyone know where I can find them please 🙏🏻

Also looking for a recommended switch to use, anyone have suggestions

@Ma3x55 Hi is there anyway u sell the modded device?

will it work if I just cut the red wire connecting to the vibration box? I don't have the tools to do all of the other stuff.

When I set it to auto catch, the plu plus freezes.

You are Awesome. If nintendo ever think of upgrading Go Plus+ it should be something like this.

Is it possible to get out of the loop (for example by holding the main button for 3 sec) if I don't use a switch? Can't find it anywhere locally with the right dimensions...

Hey I wanted to ask how much would you charge to mod my plus+? Really tired of pressing the button for great and ultra balls. 😅

Thanks! In order to throw great or ultra balls, do I need to turn off Enable Poke Auto-Throw? and also select which Ball to throw?

Just finished modding mine. Thanks for the content!