Video

Thanks for watching. I can tell you about two events I have done with it. The first was a Race at a large field. I used the same amount of speakers from this video, I used a XDJ RX2 instead of CDJ's. I would say the volume was much louder for a longer period of time that the 4 hours from this video and the Jackery lasted about 2.5 hours before it was needing to recharge. Another event, I rented it out to a friend who was DJ'ing on a float in a parade. 3 hr event, he used 2 QSC K12.2, controller and Laptop. No issues, the Jackery lasted the 3 HRs and still had about 20% left.

Thanks for watching. I have the 1500 and that can surely handle the XDJ RX3. If you want to get the 500 you would need to figure out how much of a power draw the RX3 uses and compare that to the output from the 500.

Thanks for watching. It does not appear like it in the video but the spaces were very large and I always l like to make sure that the audio covers the area. Unless the space is too small I rarely use just one speaker for anything.

Hey thanks for watching. I would speak with your client and give them a chance to give you some "favorite" songs of the Family or of the birthday boy. Depending on how religious the event is the music will either be very Hebrew or just very popish / Up to date. Good luck.

It matters if you were pushing the speakers or just playing soft music.

I am not a Electrician either but I do know that the wattage that your amp pushes to the speakers is not the same as what it consumes from the power current. Basically Wattage = Amps X Volts. You can look at the power section of your amp to determine the Amperage that it consumes, power draw. Volts should be there also. That is why I like this unit so much. The display actually shows you the wattage being pulled by what is plugged in.

@@Housemix10 all I want to know is would a Jackery 3000 power my dj setup for 5 hours. 4 speakers 8000 watts total plus a laptop 2 wash lights and a pioneer controller.

​@@djstevieo It is really not that simple. I have used the same exact equipment used in this video and played soft to moderately loud music and I was able to get 4 hours easily out of the Jackery. Another time I used the same equipment and played very loud music and I was only able to get 2 hours out of the Jackery. That is because the Amplifiers will draw more power as the music gets louder. Does this make sense to you?

Check the power consumption rating in your speaker info (sometimes have to go online to find it). For example I have DXR15 IIs and the actual power consumption Yamaha state is 130w and that will be at maximum

Thanks for watching. I would recommend the light considering the price and it's ability to produce all of the color mixing. I knew going in that I would only use it where I could also use Fog or Haze so it is not an every event type of light. I have since use some stronger and brighter laser lights. But they are much more expensive.

@Housemix10 What the name of a good lazer that a little more expensive

@@jayroboproWell, I am good at spending other peoples money. I would look at the X-Laser brand. Look for anything that has a high mW rating. I used a light that was rated 3000mW RGB and it was super bright and looked great with Haze in the air.

Thanks for watching. I have a Mini Van. If you want to see how I load everything, an example check this video out. czcams.com/video/0AKXSLvvQBY/video.html

Thanks for watching

Thanks

What version of Rekordbox are you using. The XDJ R1 will not work with the most current version of Rekordbox. You can use a 5.x version of rekordbox. Or you will need to pay for the subscription service to make it work.

Yes, with the latest firmware the unit is perfect.

I would compare the draw of a turntable to the draw of a CDJ. I would imagine it would not be much more. So about the same.

Not really. It is best to use these lights with a DMX controller. If you use a DMX application then it is even easier. You can set up different routines or control the movements on the fly.

Thanks for watching. This is right in the middle when it comes to price for a good laser light. I would only use this light if I can fog the room. Otherwise you will only see the light on the target it is pointing to. You will loose the body of the light without any particles in the air.

Just got one ..I love it

Thanks for watching

Suerte, gracias por ver el video

Thanks for watching

Thanks for watching. Good idea. I have seen those being used out in the field. They are ok. Good option for short distances.

Thanks for watching. +1 for QSC

Thanks for watching.

It depends on the version you are using. If you are using the newest version (6.x.x) you will need to pay for a plan to use Rekordbox performance. If you can find an older version (5.x.x) then it will be compatible.

@@Housemix10 My rekordbox is 6.7.5

Thanks for watching.

Yes I think you should be good. The main issue you would need to watch is the draw you put on the unit by raising the volume. That is what will get you and kill the charge on the Jackery.

@@Housemix10 I was going to get the Jackery and was looking forward to their product but after doing some research I decided on the EcoFlow Delta 2. I learned that it has a 3 times longer battery life than the Jackery, has an app, and the battery engineering is more advanced.

I do not think that they have release any yet.

Thanks for watching

Thanks for watching

Thanks for watching. The unit is pretty awesome. I use it a lot!

Thanks for watching

Thanks for watching

Thanks for watching

Bonjour Mon Amie. I have been here. Just not many new or different things to record for the gig logs. I like to keep them fresh and not repeat. Thanks for watching.

Thanks for watching

Hey, luckily we did have a few days before and after to venture into the city. Thanks for watching.

Thanks for watching

Thanks for watching. Totally up to you. But I love spending other people's money. So Yes!

The controls in the back of the light allow you to turn on the lasers. Also if you connect the light to a DMZ controller you can control when the lasers turn on. If you can't turn on the lasers from the controls on the back I would think your light has a defect. Good luck.