Video

Looks like the same day I did it, 19/8/20. Shame they closed down.

Slow down when you past a horse then you idiot...

Is there any concern with alignment after doing this? Or should they both be level if the top caps sit flush?

Dude when u were pluggin n the adapter to the power I thought u got electrocuted when u sped up the video out of nowhere lol 😂

Bro, you don't need to remove all those plastic parts to install the USB changer, connected to the AUX con. It can be easily feeded trough to.

Is there not something you need to do to make sure that the wheel of forks are centered / balanced before you tighten up the pinch bolts? Revzilla would tighten only the top ones and then bounce the suspension back and forth in order to let it find the center, or is it enough to do what you did?

What did you mean by factory tight, do you mean to say it was the wrong amount of torque (too little) or that it was as it should be? czcams.com/video/ERweonEcuK4/video.html

Thank you, it was really helpfull.

What about the inside?

I have a question to the r7 and since they are close to identical bikes under the fairings, maybe someone has a clue... The R7 has two identical plugs. one on the left and one on the right. The left is for the quick shifter i believe. the problem is: the right one doesnt work for recharging my phone. on the left its working. do i need to eneable the right plug somehow?

I see you did a cat delete pipe on the more recent SDGT mods video. Assuming it’s very loud now but curious how loud is it now with the db killer installed

All the videos of how to take of an MT07 tire I found were shit compared to this. Nice work! I’m Glad i finally remembered I found your vid when researching doing the front springs and that you showed how to take off the tire properly as those other vids would likely have you causing damage to the bike.

nice work mate

How do you clean them on the inside? Can they be washed out with a hose or is there a special method or process for this ??

Oops I removed the front axle without removing the pinch bolt. Did I damage anything?

Great video! How well does the headset paired to bike work with mesh on group riding? I worry being paired to the bike will make it more complicated than it already is.

Well said , I used to ride / race a kawasaki kr1 250 handled amazing used to ride with alot bigger bikes and they would hate the fact they would struggle to keep up with me on my humble 250 , im 50 now and just got a mt07 as wanted to get the wieght of my wrist and like riding my old kr1 its so confident inspiring and so easy and so much fun , booked some track days can't wait ....

What size headstock pin are you using?

I can't recommend getting a torque wrench for your brake caliper bolts enough. These are safety critical. A torque wrench is less than £40. For peace of mind when I really need my brakes to work it's worth it.

HELP!!! I'VE TAKEN ALL THE COVERS OFF. AND UNDERNEATH THE ADAPTORS ARE DIFFERENT THIS ORIGINAL YAMAHA USB BLOCK CONNEDTOR IS LIKE A OVAL AND THE ONE ON MY BIKE IS TRIANGLE WHAT DO I do?

Excellent video my man!! Where did you get that oil syringe set up?

You were not being a ‘prick’ when you moved to the front of the left lane to merge, this is exactly how it is supposed to work, use as much of the 2 lanes as possible before merging… people always get this wrong, merge early and get upset when people move up like you did get upset… what is suposed to happen is every gives way to each other, not close the gaps and close people out… its all about giving way, using both lanes to their full and keeping flow going, if everyone did this, traffic would flow a lot faster and safer. Sources, Highway code, IAM, police driving manual and every advance course. Unfortunately most people move over early and get defensive… its wrong.

Well shit I needed the psi

How do you clean the lining?

What should my tire pressure be for rear tire fz08

Love to see that Mt07 its pretty much the same as mine! I have bit different barends and tailkit, but the motocage package has really grown on me

Is it okay to replace that 2A fuse with something bit more buff? I feel like 2A would fry easily with a newer phone.

Loving the BMC multitool, never go without mine

I've watched this video several times since first picking up a camera in November last year. I bought it as a present for my 60th birthday and have been hooked since day one. No-one was more surprised than me when I was asked to do a photo shoot for a cigar brand which will involve photographing lifestyle style shots using a Harley Davidson. Any advice for my first ever professional shoot would be greatly appreciated. To say I'm nervous is an understatement LOL.

I wonder how easy it would be for it to be strapped to the bike so you can have the best of both worlds? (Alike the Kriega US)

Intro is so loud compared to the voice 🤯

This was very useful thanks buddy. I followed this to do my install. Btw - do you know what the other end of the plug was that you unclipped on the bike? Was it just to complete the circuit? I ended up taping it up to keep water out.

Great vid - you by any chance have the names of those connectors, links no longer available. Thanks

I loved this video!! The in depth explanation of your thought process and why you choose the settings you do was very beneficial to me, I appreciate it! Just curious tho, the preset link doesn’t open for me, do you have a newer link?

Thanks for the video, Brilliant Lesson. Appreciate it.

Instead of buying a fork syringe could i just measure 165mm down

I’m in your group I got the done up black MT07 names blane Morrison, good video helping now as of the ice and snow

I have studied all the greatest newer and a little older tires for my 21 gsxr600. After careful consideration for the money and performance these tires are what I went with. Should be here in days, can’t wait

Nice

Should reply more to peoples comments. Or just another wanna be actor making videos. There are some good questions being asked and ignored. Which will end up thous followers looking else were for answers. I am.

Cheers, didn’t get an owners manual with my purchase

Thank you so much got 3 likes!!!

Where are you now Janis ?. Hope you are well..

Were the tyres given for free from a retailer, a friend or direct from Metzler?

Sorry but the link don't work. I have the original connector usb. What pin i need?

Great job

Excellent video, so clear thank you.

I live literally just down the road from there 😀 I’ve done a few shoots down Kinwalsey lane too... the woods are pretty atmospheric

Hi Janis, Thnaks for sharing your experience about Super Duke GT. I have a Super Duke R and a Super Adventure S and I'm thinking about replacing the 2 by a GT. Do you think that can be a wise choice? Is the wind protection of the GT correct at higher speeds? Thnaks for your reply.

I got a 2021 mt07. Both road5 tyres take 42psi maximum although the user manual suggest 33/36. Can I do little bit more? I'm 70kg What would you suggest? Thanks