- 96
- 69 616 205
Workshop Companion
United States
Registrace 18. 10. 2018
Workshop Companion offers woodworking information for 21rst century woodworkers. Our director, Nick Engler, is a master craftsman, teacher, and author of over 50 books on woodworking, including “Woodworking Wisdom” and the “Workshop Companion” series. Drawing on his expertise, we are producing a woodworking web site, videos, podcasts and other digital media to help inform and entertain the next generation of craftsmen and craftswomen in this ancient art.
If you have suggestions, questions, or concerns, please go to our web site, workshopcompanion.com, click "Workshop Entrance," then "Contact Us."
If you have suggestions, questions, or concerns, please go to our web site, workshopcompanion.com, click "Workshop Entrance," then "Contact Us."
Bandsawn Nesting Boxes
This is actually two videos in one! In the first part, Nick shows how to set up your band saw for precise resawing, keeping the re-sawn wooden slabs at a consistent thickness and the block from which you are cutting them square and true. The second part shows how to use this set-up to cut the parts to make "nesting" boxes -- a collection of matching boxes that fit or "nest" inside one another. These can all be cut from a single block of wood, or a block that you assemble from several wood species to create a decorative pattern like the wooden "ribbons" shown here. Watch the first part for some great tips on resawing, and the second for a simple project you can make from scraps or firewood.
The plan for the the nesting boxes -- including detailed instructions on setting up for resawing -- is available from our Workshop Companion General Store at workshopcompanionstore.com/products/nesting-boxes
And if you'd like more information on the band saw, see Nick's book "Using the Band Saw" at workshopcompanionstore.com/products/using-the-band-saw
You can learn more about for the Assembly Table that he uses at czcams.com/video/1ujUF5skCzI/video.html
And the plans for the table are at
workshopcompanionstore.com/products/assembly-table-project-plans
To see all of our videos and SUBSCRIBE for more, see: czcams.com/channels/k480B1pofOjThMfkBjhDpQ.html .
And please visit the WORKSHOP COMPANION GENERAL STORE where we offer a wide selection of Nick's BOOKS and PROJECT PLANS in digital format: workshopcompanionstore.com/ . All our plans feature both English/Imperial and metric measurements. And you can pick up one of Nick’s books FREE just for visiting!
To follow us on social media, try:
FACEBOOK - workshopcompanion.
INSTAGRAM - workshop_companion
00:00 Into
01:04 Choosing a Bandsaw Blade
02:57 Tensioning the Blade
05:34 Positioning Fence on Bandsaw
08:08 Making Nesting Boxes - Preparing the Stock
11:49 Resawing and Assembling Parts
17:05 Finished Boxes
For our non-English-speaking viewers: Closed captions can be set to any language. Click on “CC” (Closed Captions) at the bottom of the screen to turn them on. Click on the gear (Settings) and a menu appears. Click on “Subtitles/CC” and another menu will appear. Click on “Auto Translate” and a menu of languages will appear. Click on the language you want for the closed captions and you will be returned to the video -- closed captions will appear in the language you have chosen. If these captions cover up some of the action, place the cursor over the captions, press and hold the left mouse button, then drag the captions to where you want them on your screen. Release the mouse button and they’ll stay there.
Para nuestros espectadores que no hablan inglés: los subtítulos se pueden configurar en cualquier idioma. Haga clic en "CC" (Subtítulos) en la parte inferior de la pantalla para activarlos. Haga clic en el engranaje (Configuración) y aparecerá un menú. Haga clic en "Subtítulos/CC" y aparecerá otro menú. Haga clic en "Traducir automáticamente" y aparecerá un menú de idiomas. Haga clic en el idioma que desea para los subtítulos y volverá al video; los subtítulos aparecerán en el idioma que haya elegido. Si estos subtítulos cubren parte de la acción, coloque el cursor sobre los subtítulos, presione y mantenga presionado el botón izquierdo del mouse, luego arrastre los subtítulos a donde quiera que estén en su pantalla. Suelte los botones del mouse y permanecerán allí.
Our Music is Licensed through Epidemic Sounds - www.epidemicsound.com/campaign/invite-a-creator/?_us=Referral&_usx=bkvc7i&
And thank you so much for your time and interest!
The plan for the the nesting boxes -- including detailed instructions on setting up for resawing -- is available from our Workshop Companion General Store at workshopcompanionstore.com/products/nesting-boxes
And if you'd like more information on the band saw, see Nick's book "Using the Band Saw" at workshopcompanionstore.com/products/using-the-band-saw
You can learn more about for the Assembly Table that he uses at czcams.com/video/1ujUF5skCzI/video.html
And the plans for the table are at
workshopcompanionstore.com/products/assembly-table-project-plans
To see all of our videos and SUBSCRIBE for more, see: czcams.com/channels/k480B1pofOjThMfkBjhDpQ.html .
And please visit the WORKSHOP COMPANION GENERAL STORE where we offer a wide selection of Nick's BOOKS and PROJECT PLANS in digital format: workshopcompanionstore.com/ . All our plans feature both English/Imperial and metric measurements. And you can pick up one of Nick’s books FREE just for visiting!
To follow us on social media, try:
FACEBOOK - workshopcompanion.
INSTAGRAM - workshop_companion
00:00 Into
01:04 Choosing a Bandsaw Blade
02:57 Tensioning the Blade
05:34 Positioning Fence on Bandsaw
08:08 Making Nesting Boxes - Preparing the Stock
11:49 Resawing and Assembling Parts
17:05 Finished Boxes
For our non-English-speaking viewers: Closed captions can be set to any language. Click on “CC” (Closed Captions) at the bottom of the screen to turn them on. Click on the gear (Settings) and a menu appears. Click on “Subtitles/CC” and another menu will appear. Click on “Auto Translate” and a menu of languages will appear. Click on the language you want for the closed captions and you will be returned to the video -- closed captions will appear in the language you have chosen. If these captions cover up some of the action, place the cursor over the captions, press and hold the left mouse button, then drag the captions to where you want them on your screen. Release the mouse button and they’ll stay there.
Para nuestros espectadores que no hablan inglés: los subtítulos se pueden configurar en cualquier idioma. Haga clic en "CC" (Subtítulos) en la parte inferior de la pantalla para activarlos. Haga clic en el engranaje (Configuración) y aparecerá un menú. Haga clic en "Subtítulos/CC" y aparecerá otro menú. Haga clic en "Traducir automáticamente" y aparecerá un menú de idiomas. Haga clic en el idioma que desea para los subtítulos y volverá al video; los subtítulos aparecerán en el idioma que haya elegido. Si estos subtítulos cubren parte de la acción, coloque el cursor sobre los subtítulos, presione y mantenga presionado el botón izquierdo del mouse, luego arrastre los subtítulos a donde quiera que estén en su pantalla. Suelte los botones del mouse y permanecerán allí.
Our Music is Licensed through Epidemic Sounds - www.epidemicsound.com/campaign/invite-a-creator/?_us=Referral&_usx=bkvc7i&
And thank you so much for your time and interest!
zhlédnutí: 98 731
Video
Pegged Mortises & Tenons -- Square Pegs in Round Holes
zhlédnutí 64KPřed 8 měsíci
If you’re still laboring under the childhood delusion that you can’t put square pegs in round holes, this may convince you otherwise. For millennia, craftsmen have secured joints with wooden pegs called trenails or trunnels. In the last century, makers of Craftsman or Mission-style furniture have used them as both fasteners and decoration. They pegged mortise-and-tenon joints together by drivin...
Bending Wood With Heat
zhlédnutí 470KPřed 9 měsíci
You can easily make tight, permanent bends in thin pieces of wood simply by heating one side! Nick walks you through the technique as he demonstrates an ingenious fixture that serves as both a heat source and a bending form. This shopmade jig holds propane torch as it heats a short section of plumbing pipe. This, in turn, heats the board as you bend it. The plans for this heat bending jig (and ...
Is This the Future of Hand Planes?
zhlédnutí 179KPřed 10 měsíci
Imagine a bench plane with a disposable knife. You never need worry about the iron getting dull, chipping the cutting edge, or setting the plane on a hard surface. If the plane won’t cut, just pop in a new knife. Great idea, but can this wonder cut as well as a conventional bench plane with a traditional iron? Nick does a thorough comparison, pitting the Rali Evolution and its disposable knives...
Band Saw Lumber Part 2 -- Reading the Grain
zhlédnutí 205KPřed rokem
Band Saw Lumber Part 2 Reading the Grain
Scrapwood Sleigh - Band Saw Compound Cutting Project: How to
zhlédnutí 44KPřed rokem
Scrapwood Sleigh - Band Saw Compound Cutting Project: How to
Workshop Condiments: The Great Coke/Ketchup Controversy
zhlédnutí 31KPřed rokem
Workshop Condiments: The Great Coke/Ketchup Controversy
Cutting & Handling Plywood in a One-Person Shop
zhlédnutí 1,9MPřed 2 lety
Cutting & Handling Plywood in a One-Person Shop
Six Ingenious Cabinetmaking Tips & Jigs
zhlédnutí 317KPřed 2 lety
Six Ingenious Cabinetmaking Tips & Jigs
Crucial Table Saw Alignments and Adjustments
zhlédnutí 138KPřed 2 lety
Crucial Table Saw Alignments and Adjustments
Nesting Christmas Trees -- A Holiday Project
zhlédnutí 23KPřed 2 lety
Nesting Christmas Trees A Holiday Project
What a wonderful informative video. I have recently started a hobby in woodworking and I have ordered a pocket hole jig and bit. I thought it was supposed to be a durable way of screwing the wood together, but after watching your video I now see it has many faults. But I will give it a go and see if I can make a few joints with the technique. Many thanks
I am a big fan. As a beginner who always want to learn and know science/technical details of "why" something happens - thank you for your educational content
I feel like this guy is pulled straight from a 70s cartoon, I love this guy
Won’t be my problem by that time.
When I saw the title I thought of a Shopsmith in Drill Press mode. Other than rack and pinion adjustment your jig has it all. You have inspired me to make one for the local community centre wood shop which has a metal working drill press complete with all the frustration you mention.
Hmmmm, interesting. When I started watching this and you mentioned the importance of pilot holes i thought 'I don't remember that being mentioned by ANY of the youtube vids about jigs on the market'. Lo and behold you then said exactly what I was thinking and introduced a separate bit (the aircraft bit) for the pilot hole part of the process. Well done, Nick, I must look up some more of your videos.
In early 70's I used to work for a woodworking company called Dankeart in UK. What this great man is teaching, we used to do them very often. I'm retired now and I enjoy watching his videos. He's unique. God bless you Sir.
I just love the intro
Gotta be the least concealed of any type of hinge
Good Trainer
Big friggin wahsers!!! 😂
"lasciate ogni speranza, voi chentrate" so true of woodworking! But you make the journey most enjoyable. I love learning and you make it fun.
Great vid!! Thanks for this. I'm refinishing a massive table but due to memory issues, I have to re-learn a lot of things I knew. I've added this to my "Wood" playlist. Cheers mate!
Cheers to you too.
Glue and nails make me the jointer I aint
I have watched several videos on tablesaw sleds and this one l wish to build. Why? It will do what l want, uses less material, weighs less than most thanks
Most welcome.
you want two stickers right at the end of the lumber. This reduces the surface area exposed right at the end of the log countering water escaping from the ends excessively
Thank you a million times wood working Einstein. ❤
That was so cool 😎
That is so effing clever ❤
Great advice thanks for sharing
Most welcome.
You're a brilliant resource. ❤
he's got the best hair do, like the mad scientist of wood working, great channel
Despite measuring and re-setting the angle of my table saw blade with a variety of squares and digital tools, I couldn't for the life of me cut a true 45-degree miter. It was always very slightly off regardless of what any of my measuring devices said to the contrary. After learning about marking the blade runoff from this video, I got a perfect miter after one attempt. Never would have considered that myself, but it makes so much sense once you point it out. Thanks so much for the guidance!
Most welcome; glad to be useful.
I'm getting tired of saying this stop staining the wood. If you don't like the color of the wood then don't use that wood. F
You're a gem dude
A waste of fuckin time joint
To avoid spending a fortune on tools spend a fortune on tool, singular
Living in Sweden and the lack of info on tools and even chemicals for craftsmen infuriates me so much! How am I supposed to magically know how to use this 3 part glue system that says “plastic glue”. ZdydUseysitxgo😡
It's the hairy, pudgy fingered 60 minutes correspondent. Quite a bit of work must have gone into organizing that expose, very instructive, thank you.
Why did they kill varnish?
Wasn't aware that it had been executed. Varnish is a simple blend of oil, solvent, and resin. Example: boiled linseed oil, mineral spirits, and pine rosin. Ancient varnish-makers used a wide variety of natural resins such as amber, gum, dammar, copal, rosin , sandarac, and balsam. Modern varnishes use synthetic resins such as alkyds, phenolics, and urethanes. Most recently, marketers have begun labeling varnishes according to their resins -- urethane and polyurethane are the best examples. These so dominate the market that they give the impression that varnishes are no more. But if you look around, you can still find them -- Tried & True, Vermont Natural Coatings, Rustoleum, and Old Masters are just of the few of the coatings manufactures still making traditional varnishes -- and labeling it as such.
I’m convinced this is the Hamburger guy’s dad
What is the process of applying Rudy’s finish? 25:28
Standard procedure for a wipe-on finish: Apply with a brush or cloth, let penetrate a few minutes, wipe off the excess.
I made a huge mistake when I was making my edge guide and I had to rebuild it. It is vital to ensure the circular saw blade is exactly 90 degrees to the base, otherwise you may be cutting a bevel on the edge of the saw guide before your first use. If the blade is trued before the second cut, it may remove some of the bevel and alter the distance from factory edge to cutting edge. Yes, it is minuscule but there.
Good tip. Thanks for sharing.
For anyone that doesn't know who Nick Engler is, go on ahead and give this amazing gentleman a google. Come back in a few weeks when you are caught up. I want to be this cool when I grow up.
I don't mind my wood looking like wood so burnishing it seems great to me. But there's no way I'm sanding to 1000 grit.
subbed. you lost me, but you caught me again. great video, thank you.
Most welcome...and welcome!
Another great tutorial. Sincere thanks from a grateful subscriber. I’ve used Q-tips in the holes for adjustable shelves so the holes don’t get painted. I like your drill bit idea much better.
Sand paper is the toilet paper of the working man. It's a blessing and a curse 💀💀
I have an old 1970s face framed cabinet, and the doors sit flush into the frame. I ve been trying to find a hinge that works but is able to adjust in all directions. I don’t think it exists.
As always, thanks for explaining how to do it, as well as pointing out ways to make it more accurate (in this case, making templates). You sir, are both a master craftsman and a master educator. Thank you for your dedication to making us better makers.
Most welcome.
For a second, I thought peanut butter was one of the possible finishes. Imagine my disappointment..
Yeah. My dog Bella was disappointed as well. She dreams about furniture covered in peanut butter.
Three minutes in and I finally found what I needed on the types of hinges. Took awhile to get my answers despite googling. The video has really been educational and helpful.
Крутой мастер! Снимаю шляпу. НО! Нужно стричь ногти иногда)
This dude is a freaking genius!
Did you notice doggo?
You are an excellent teacher. Thanks for all the efforts you put into this video
Most welcome.
I was hoping you’d have a video on making this jig. Unfortunately not I guess😏
Our plans for this jig offer step-by-step instructions, as well as engineering drawings for both large and small assembly tables. The measurements are in both Imperial and metric. The link is in the description.
This looks like an ad. I chose hand tools. Much cheaper
He cant help it. He repped for them for years, wrote the books, trainings, videos. He loves them.
Fantastic video! Very educational and high-quality craftsmanship! I think I can tell that a lot of time, care, knowledge and preparation went into this video. You also present it wonderfully. You would say you are a teacher. This is one of the best video channels I know in this area. Thank you so much!
Most welcome...and thanks or the kind words.
hello from Viet Nam ❤
Hi back from Ohio.