- 51
- 184 768
Klingberg Motorsport
Australia
Registrace 19. 08. 2018
Drift team based in the Barossa, South Australia. Building cool things in my shed.
ABANDONED and FORGOTTEN VN Commodore INTERIOR CLEAN before and after.
I've been putting this off for SOOOO long, this is without a doubt my least favourite part of any build.. the interior! Always lots of broken clips and plastics but luckily this car came with some spares. If you remember back to some of my first episodes on this car, I bought it disassembled as it was someone's old project and I decided to save it (video link below). First job was to work out if I had enough bits to put it back together. I'm not doing anything special with it, just cleaning it up and making a back seat fit around the tubs to conceal them a little bit more and keep the OEM look.
Please let me know what you think, hit the like button or leave a comment and don't forget to subscribe to catch my new videos!
Thanks for watching everyone!
Check out some of my other videos.
I Bought the Cheapest VN Commodore on marketplace, not running.. (VN EP.1)
czcams.com/video/I3qPv906Odc/video.htmlsi=gyblYXiywba3aKG-
VN Commodore RB30 Conversion Part 1
czcams.com/video/IHI0mbgAf3A/video.htmlsi=BBkmnI40OXlnVvjX
Grandpas MAZDA CAPELLA parked in the bush for almost 30 YEARS! Will it run? Will it drive again?
czcams.com/video/t6psBIfyQkQ/video.htmlsi=oJrFs-8_lbJsrJ-j
First DRIFTING competition at ADELAIDE MOTORSPORT FESTIVAL and I WON in my old COROLLA
czcams.com/video/33bVnI0l4BQ/video.htmlsi=GecWH_vu_8Qr8DFx
NEW! Klingberg Motorsport Store, Want a T-shirt or sticker? www.klingbergmotorsport.com.au
Facebook
KlingbergMotorsport
Instagram
jarrad_klingberg
Please let me know what you think, hit the like button or leave a comment and don't forget to subscribe to catch my new videos!
Thanks for watching everyone!
Check out some of my other videos.
I Bought the Cheapest VN Commodore on marketplace, not running.. (VN EP.1)
czcams.com/video/I3qPv906Odc/video.htmlsi=gyblYXiywba3aKG-
VN Commodore RB30 Conversion Part 1
czcams.com/video/IHI0mbgAf3A/video.htmlsi=BBkmnI40OXlnVvjX
Grandpas MAZDA CAPELLA parked in the bush for almost 30 YEARS! Will it run? Will it drive again?
czcams.com/video/t6psBIfyQkQ/video.htmlsi=oJrFs-8_lbJsrJ-j
First DRIFTING competition at ADELAIDE MOTORSPORT FESTIVAL and I WON in my old COROLLA
czcams.com/video/33bVnI0l4BQ/video.htmlsi=GecWH_vu_8Qr8DFx
NEW! Klingberg Motorsport Store, Want a T-shirt or sticker? www.klingbergmotorsport.com.au
KlingbergMotorsport
jarrad_klingberg
zhlédnutí: 1 774
Video
MANUAL pedal box using AUTO pedals for under $100 in the RB30 VN Commodore?
zhlédnutí 1,6KPřed dnem
I've been thinking about this one for a while...how cheap can it be to build a hydraulic manual pedal box for a Commodore? I don't want to spend the $1000 for a full standard hydraulic pedal box setup. I don't even want to spend the $400 on a master cylinder that would loosely bolt in. So I decided to make a reverse mount master cylinder pedal box using an auto pedal box, manual clutch pedal fr...
"Rebuilding" my $500 RB30 and getting it ready for a TURBO. VN Commodore + BOOST engine freshen up!
zhlédnutí 1,9KPřed 14 dny
Getting stuck in to the RB30 for the VN, I'm stripping the RB down to see if my $500 engine is usable or not. I've got some fresh parts on the way and I am going to do a budget "rebuild" (not really a rebuild I guess, maybe just a freshen up). What do you need to do to an RB30 to be able to turbo it? Or more to the point what are the least amount of mods I can get away with for the most power? ...
I bought ANOTHER MAZDA CAPELLA, this one has a ROOF!! What are my plans?....
zhlédnutí 2,9KPřed 21 dnem
I bought another Mazda Capella this week, but a different story for this one as it is going to give its life to save another! I seen this one on market place quite a while ago but I decided to grab it to help me fix my Grandpas old Capella. So what's my plans? Well, cut a roof off of one car and weld it on another.... Might add a roll cage, a V8 and some other spicy bits... have a watch for all...
Farming, but I'm not a farmer. Learning tractor-ing! Seeding 2024, God’s Country, South Australia.
zhlédnutí 336Před 28 dny
Bonus farming video with a couple time lapses, something a little different to the normal car content. Seeding 2024 near Kimba on the Eyre peninsula in South Australia. I learn how to drive the big tractor - Case 385, 9.5t Morris air seeder and 50ft DBS seeder bar. I did reuse a couple clips from last weeks video just to complete the story. Disclaimer: I’m not a farmer, just a wanna-be 🤣 Thanks...
Grandpas MAZDA CAPELLA parked in the bush for almost 30 YEARS! Will it run? Will it drive again?
zhlédnutí 2,5KPřed měsícem
My Grandpa bought this series 4 Mazda Capella brand new in 1975 from Whyalla here in South Australia. He drove it for 20 years then it got parked under a tree, sitting unregistered since 1996. Things happened and it ended up being used as practice for SES (State Emergency Service) training and the roof got cut off with the jaws of life some time in the late 90's (worthless at the time to them)....
HOMEMADE FUEL TANKS are the BEST! BUDGET VN Commodore fuel tank to support 500hp? RB30 TURBO VN Ep.5
zhlédnutí 2KPřed měsícem
I'm too cheap to spend lots of money on a fuel system for the RB30 VN, so I'm modifying the standard Commodore fuel tank to be able to use a couple of old Bosch 044 pumps that were once in the corolla. Twin 044 fuel pumps should easily be good enough for 500HP! Is it more hassle than its worth? Probably but I'm keen to make it regardless. I'm bringing this forgotten BT1 VN commodore back to lif...
RB30 Turbo VN Commodore BUILD UPDATE! Making my own FORWARD FACING INTAKE MANIFOLD
zhlédnutí 2KPřed měsícem
VN RB30 Turbo build update! Loads more fab work this week, Intercooler piping, external waste gate plumbing, AND building my own forward facing intake manifold. Also, can you come up with a name for the VN? I'm giving away a free Klingberg Motorsport t-shirt to someone who comes up with the best name (I will pick the winner). Drop a comment below if you have an idea for a name! I'm bringing thi...
V8 Toyota Corolla VS 2JZ Toyota Corolla - DRIFTING and BURNOUTS in MELBOUNRE at MOTOR EX 2024!!
zhlédnutí 805Před měsícem
NEW! Klingberg Motorsport Store, Want a T-shirt or sticker? www.klingbergmotorsport.com.au/ This week we are off to Victoria to do Drifting Demos in Melbourne, Australia. We were invited to put on a show and do some passenger rides with Drift Cadet for MotorEx 22 (2024). So Nick loaded up his LS1 Ke70 Corolla sedan and I loaded up my 2JZ KE70 Corolla wagon and we made the 700km trip from home i...
BUILDING an exhaust - VN COMMODORE RB30 + turbo conversion part 3
zhlédnutí 1,9KPřed měsícem
NEW! Klingberg Motorsport Store, Want a T-shirt or sticker? www.klingbergmotorsport.com.au/ Building a stainless steel exhaust from a box of scraps, kind of. RB30 turbo back exhaust for the VN coming right up. The party pipe if you will, no muffler needed. I'm bringing this forgotten BT1 VN commodore back to life in the best way possible. Its getting a spicy engine to suit the rear end. Tubbed,...
FABRICATING an RB30 TURBO MANIFOLD for my VN COMMODORE. VN RB30 Conversion Part 2.
zhlédnutí 2,4KPřed 2 měsíci
NEW! Klingberg Motorsport Store, Want a T-shirt or sticker? www.klingbergmotorsport.com.au/ RB30ET VN! Part 2 of my BT1 VN Commodore RB30 turbo conversion. Today I'm fabricating my a turbo manifold from scratch for my VN Commodore, hopefully I can teach you something? I'm going to go through the process and explain as much as possible as I'm going (hold tight as I tend to over explain when I'm ...
RB30 + TURBO + VN Holden Commodore. My VN becomes a BT1 interceptor! How to VN RB30 conversion PT 1
zhlédnutí 3,6KPřed 2 měsíci
RB30ET VN! Welcome to Part 1 of my BT1 VN Commodore RB30 turbo conversion. I'm going to go through the process and explain as much as possible as I'm going (hold tight as I tend to over explain when I'm saying everything I'm thinking haha). I've done a lot of engine conversions before but I haven't put an RB30 in a VN before so I'm learning a bit as I'm going. I'm bringing this forgotten BT1 VN...
VN BUILD ENGINE REVEAL! Plus I try to start the old 3.8 for the first time in 7 years, will it run?
zhlédnutí 2,5KPřed 2 měsíci
What engine is going in the VN? This car has been abandoned for the last 7 years, sat rotting away. Well not any more, today I fire up the 3.8 for the first time in a loooong time. Then I make a start on the new engine conversion and it might not be an SR20.... I'm bringing this forgotten BT1 VN commodore back to life in the best way possible. Its getting a spicy engine to suit the rear end. Tu...
VN rear end is done! Tubbed VN Holden Commodore on 325 tyre back on the ground. Big tyre Part 4.
zhlédnutí 2,8KPřed 2 měsíci
The wrecked VN Commodore is part way through its repairs, rear end is done back on the ground, tubbed, shortened diff, 325 tyre, coil overs, 4 link. Is it over kill? Absolutely - for now anyway. Next week we are digging in to the engine so make sure you hit the subscribe button to stay up to date! Welcome to a new video series everyone, I bought an absolute gem (may or may not be a piece of cra...
Making tubs from scratch! Does a 325 Radial tyre fit? DIY, HOW TO MINI TUB A VN COMMODORE Part 3.
zhlédnutí 3,5KPřed 3 měsíci
Part 3 of tubbing (making a big tyre fit) my wreck of a VN Commodore. This week lots more welding, DIY mini tubs from scratch and test fit the massive 325 tyre on the back. Ultimate street car-ing? Welcome to a new video series everyone, I bought an absolute gem (may or may not be a piece of crap) BT1 VN Commodore. It was abandoned and left for dead, will it ever run again? Join me on the journ...
First DRIFTING competition at ADELAIDE MOTORSPORT FESTIVAL and I WON in my old COROLLA
zhlédnutí 867Před 3 měsíci
First DRIFTING competition at ADELAIDE MOTORSPORT FESTIVAL and I WON in my old COROLLA
HUGE event for the COROLLA this weekend - DRIFTING IN ADELAIDE! The 3 day rebuild of my DRIFT WAGON
zhlédnutí 1,3KPřed 3 měsíci
HUGE event for the COROLLA this weekend - DRIFTING IN ADELAIDE! The 3 day rebuild of my DRIFT WAGON
Destined for the scrap yard! HOW TO TUB A VN COMMODORE pt 2. Coil over install. BIG TYRE STREET CAR
zhlédnutí 3,9KPřed 3 měsíci
Destined for the scrap yard! HOW TO TUB A VN COMMODORE pt 2. Coil over install. BIG TYRE STREET CAR
CHEAPEST way to TUB my $600 BT1 VN COMMODORE. BIG tyre incoming, fabricating everything myself!
zhlédnutí 3,4KPřed 4 měsíci
CHEAPEST way to TUB my $600 BT1 VN COMMODORE. BIG tyre incoming, fabricating everything myself!
Did I just buy the WORST VN COMMODORE on the internet?! Will it ever run again?
zhlédnutí 4,9KPřed 4 měsíci
Did I just buy the WORST VN COMMODORE on the internet?! Will it ever run again?
Adelaide Motorsport Festival 2024 - DRIFTING COMPETITION tyre testing Toyota Corolla Wagon
zhlédnutí 723Před 4 měsíci
Adelaide Motorsport Festival 2024 - DRIFTING COMPETITION tyre testing Toyota Corolla Wagon
INTERIOR CLEAN on the EB Falcon paddock find, it cleaned up WAY too good! + Cars and Coffee Barossa.
zhlédnutí 3KPřed 4 měsíci
INTERIOR CLEAN on the EB Falcon paddock find, it cleaned up WAY too good! Cars and Coffee Barossa.
COROLLA gets new brakes. Fixing my Summernats mess ready for DRIFTING tomorrow + HUGE announcement!
zhlédnutí 556Před 5 měsíci
COROLLA gets new brakes. Fixing my Summernats mess ready for DRIFTING tomorrow HUGE announcement!
The EB Falcon is back! First mods for this Australian Outback survivor, paddock find Falcon returns!
zhlédnutí 6KPřed 5 měsíci
The EB Falcon is back! First mods for this Australian Outback survivor, paddock find Falcon returns!
Grandpas XE Ford Falcon Pt 3. Final steps to get it back on the road, the ULTIMATE weekend cruiser?
zhlédnutí 7KPřed 5 měsíci
Grandpas XE Ford Falcon Pt 3. Final steps to get it back on the road, the ULTIMATE weekend cruiser?
SUMMERNATS 36 was WILD! Best cars in Australia, drifting, burnouts + kicked out?
zhlédnutí 2,1KPřed 5 měsíci
SUMMERNATS 36 was WILD! Best cars in Australia, drifting, burnouts kicked out?
Our ROAD TO SUMMERNATS 36. Dyno tune did not go to plan, crazy last minute rush!
zhlédnutí 1,2KPřed 5 měsíci
Our ROAD TO SUMMERNATS 36. Dyno tune did not go to plan, crazy last minute rush!
Corolla Engine build. BIG rush to make it to SUMMERNATS 36 2024.
zhlédnutí 1,5KPřed 6 měsíci
Corolla Engine build. BIG rush to make it to SUMMERNATS 36 2024.
BARN FIND resurrection! Bringing the XE Ford Falcon S-Pack back to life. Part 2.
zhlédnutí 9KPřed 6 měsíci
BARN FIND resurrection! Bringing the XE Ford Falcon S-Pack back to life. Part 2.
XE Ford Falcon BARN FIND! Untouched for 13 years, WILL IT RUN? Saving my Grandpas S-Pack Falcon Pt 1
zhlédnutí 26KPřed 6 měsíci
XE Ford Falcon BARN FIND! Untouched for 13 years, WILL IT RUN? Saving my Grandpas S-Pack Falcon Pt 1
Funny how XD/XE are now collectible, they definitely were not when released like their predecessors!
Coming up good the front seats are wrong the door card colour is the same as the back seats
It's coming up a treat Jarrad. Keep up all that hard work
ive got a VN (mayybe VP) steering wheel ill straight swap if u still have an can drop that rb30 trans u mentioned last vid
Do VR door card inserts fit VN? I know they’re all different patterns im just curious
Mang mang go bye bye!
Awesome work mate. Interior came up great. It's awesome to find the build sheet.
The build sheet says April 89 sales date. Wonder if thats when it was built. I ask as it has a rear parcel shelf stop light. I believe they didnt come in till July or so of 1989. There was an ADR rule that came into effect that mandated them. I have a March 89 Exec and it doesnt have the parcel shelf stop light.
Thank you for the video mate.👌
It's not a VN unless its got s Sony Xplod sub in it.... That come up mint!!!
🤣 My thoughts exactly.
That’s the best sounding ls 👌
Wow nice work mate. That peddle box came up awesome. Might get you to make a hydraulic set up for my manual vn, I hate how heavy the cable set up is. 👍
I reckon 30mm bolt on spacers and the heat gun for the bumper...careful not to melt it though..... I subbed too by the way!
Nice build man, I'm jealous of your garage!
Bitin
Dummy door
Yeah awesome stuff man, bloody enjoyed that.
I drink every time you say ‘but’. 🍻
But…. Sorry for the hang over 🤣
@@klingbergmotorsport all good 😅 Love the content.. keep it coming mate!
Sensational job Jarrad very nice keep up the great work.
The pedal box looks mint. I live in two wells I can pick up the gearbox tomorrow?
Sorry I’m at work this weekend so it may not work out to grab it, But it’s yours if you want it. Email me your phone number jarradklingberg@gmail.com and I’ll send you a message to tee something up 👌
No worries mate I'll email you cheers for that 😎
Awesome work. Would a return spring be a good idea?
Yep it has one, I ran with the standard return spring 👌
Best backshed channel on the tube. #boilermaker #fabricator
Absolutely loving the whole VN build, keep up the great work mate
Great work Jarrad I like your new hoodie
everyone raves about the S3 VS Getrag pedal box assembly's cos they're rare but in actual fact if you look at the non slave pedal box u can see that trusty ol GMH has jus tack welded a plate over the clutch slave cylinder location lol.. so in theory you should be able to use the vs getrag slave for RB G box..?? - driftsquid has a good rb budget build vid, highly recommend. its best option with the age of 30s now, especially of intending to cram boost down its throat 🤙
Loving the build!!
Hey mate, rb sumps are rtv from factory.. Love the channel dude 🤙
Cheers, I thought so but wasn’t 100% sure
Yeah wicked man, keen to see how it progresses along, more video's is awesome. Cheers
Bro I’m loving this content. Your channel is one of the best on CZcams! Don’t stop the grind my man ❤
Glad you enjoy it! And I appreciate the kind words! 👌👌
You’re a machine you don’t stop well done
Cheers, I appreciate the kind words 👌
Anytime mate, appreciate the shout out 😊
All good mate, I appreciate the pedal box haha. Still got a shirt coming your way, I just need to order some more sizes 👌👌
@@klingbergmotorsport sweet as man, can't wait 💪
Mate check u jave not left one of the earths off laying under the battery was a very common thing to do as they had 4 separate earth wires going to the battery when i work for the NRMA on these
Mate it will learn to idle this was very very common that's why they had battery minders back in the day when u changed the battery
Mate serviced my time on these back in the day it will just be badly clogged injectors and they will come right after 500km send it .oh and that starter issue was standed with them its a worn ring gear u need to turn the motor a bit by hand when they wont grab lol that module is called a thickthimle and if it runs its good to go . Was very surprised to see it idle they had major issues with not idling after flat/dead batteries.
Amazing video mate defs inspires me to do the same to my ef
The louvre would look great on it
They honestly look sick on trident mags
Taking some inspiration from your fellow SA guy Jay!? Plans sound good, that's great these have a strut/4-link rear - I assumed they were leaf sprung. AR5 from a Colorado or Rodeo could be another gearbox to consider on the cheap. There are a heap of guys using them in the states and a few places sell conversion parts.
Haha, I swear it’s just a coincidence 😂 AR5s are unfortunately quite hard to find, they are a gearbox that’s on my radar but don’t come up very often. Not for a decent price at least.
Just came across your channel because i picked up a ef fairmont great to see you revive the old falcon love this type of content yourve earnt a new subscriber
Awesome, thank you!
Very interested in the future of this car , especially from a state most people would find beyond repair. Love these series 2 first generation Capellas and glad one can see a second life
I had a better night sleep watching you bring back this falcon to life.
Cleetus McFarland vibes with the music
Haha. Yep 👌👌
My mum had one of those jap crap toy cars she also had a Toyota Celica same thing jap crap 💩 you’re dreaming if you think you’re going to swap roofs over both cars rotten 😂
I had an April 78 built Capella, great car, went twice around the clock.
man i need to sort my capella out
I'd be keen on the floor pans if possible 😊
Easy, I’ll sus out what Im going to use and let you know 👌
Those Mazdas are bullet proof. Had one as an undercover car in the early 90's. Couldnt kill it.
I think a w40 will be fine I had a corona 4 speed in my vlt drift car with 200kw @ the wheels. Only broke 3rd twice driving badly.
looking forward to see how the roll cage turns out. spider man 🕷🕷
A friends brother had a white Capella. Can't remember exactly which rotary it had in it, but it was built to old Group A specs. We were travelling along the Tamworth- Nundle road in NSW at Mach 3, hit a bump in the road and it was like the hand of God literally picked the whole car up, placed it on the other side of the road, we must have landed 10m further down the road. It was a tough lil car, but it would randomly get sketchy at times for no reason (cursed?!)