Andrew Fitzpatrick
Andrew Fitzpatrick
  • 19
  • 281 981

Video

Mercedes 1996 C220 - EGR Valve Cleaning and Replacement
zhlédnutí 13KPřed 6 lety
Removal, cleaning and reinstall of EGR Valve on a 1996 Mercedes C220 - (W202) NOTE: Correction - EGR tube from the valve runs to the intake manifold, not the throttle body as stated in the video dialogue. Hand tighten #5 hex bolts to the head
Mercedes C220 W202 - EGR Clean and Replace - Part 3
zhlédnutí 7KPřed 6 lety
1996 Mercedes W202 EGR Clean and Replace Part 3
Mercedes C220 W202 - EGR Clean and Replace - Part 2
zhlédnutí 6KPřed 6 lety
1996 Mercedes W202 - EGR Clean and Replace Part 2
Mercedes C220 W202 - EGR Clean and Replace - Part 1
zhlédnutí 16KPřed 6 lety
1996 Mercedes W202 - EGR Clean and Replace Part 1
1996 Mercedes C220 - Transmission Fluid and Filter Change - 722.423 (Part 1)
zhlédnutí 14KPřed 7 lety
The transmission model for this car is the 722.423. Six 13mm bolts attach the trans pan to the housing - drain plug is 14mm Use approved fluid ONLY!! While you are under the car, look for fluid leaks coming from other parts of the trans housing or the block. Also consider replacing the steering damper shock located by the steering linkage - czcams.com/video/wdWdEL-raB4/video.html Also, inspect ...
1996 Mercedes C220 - Transmission Fluid and Filter Change - 722.423 (Part 2)
zhlédnutí 6KPřed 7 lety
The transmission model for this car is the 722.423. Six 13mm bolts attach the trans pan to the housing - drain plug is 14mm. Use approved fluid ONLY!! While you are under the car, look for fluid leaks coming from other parts of the trans housing or the block. Also consider replacing the steering damper shock located by the steering linkage - czcams.com/video/wdWdEL-raB4/video.html Also, inspect...
1996 Mercedes C220 (W202) - Transmission Bowden Cable Adjustment
zhlédnutí 68KPřed 7 lety
Adjust the barrel adjuster counterclockwise to hold onto gears longer and increase acceleration power - Throttle should also be adjusted to correct position - consult a professional if needed!
1996 Mercedes C220 W202 Transmission Pressure Modulator Adjustment
zhlédnutí 77KPřed 7 lety
The car has been plagued with low power and jerky/hard shifts between all gears (1-2, 2-3. and 3-4) - automatic downshift gear changes have been smooth. I'm reinstalling the vacuum line into the vacuum modulator and adjusting the vacuum modulator cap from a 8:00 position to a 6:00 position to smooth out the jerkiness of the gear changes. Also adjusting the transmission Bowden Cable to hold each...
1996 Mercedes C220 (W202) - Instrument Cluster Bulb Replacement
zhlédnutí 3,5KPřed 7 lety
Note: At 3:11 should be "1.2 watt" instead of "1.2 volt"
1996 C220 Console Bulb Replacement Part 2
zhlédnutí 249Před 7 lety
Part 2 - Note: at 0:27 should be "1.2 watt" instead of "1.2 volt"
1996 Mercedes C220 - Instrument Cluster Bulb Replacement
zhlédnutí 1,3KPřed 7 lety
Replacing several burned out cluster bulbs today - The steering wheel DOES NOT need to come off to do this - bring patience and WD40. The wattage of each bulb needed is stamped on the back of the instrument cluster - 1.2w for most of the bulbs - 2.0w for the speedo and tachometer.
1996 Mercedes C220 - 200,000 Miles
zhlédnutí 1,1KPřed 7 lety
Another testament to German Engineering - 1996 Mercedes C220 turned 200,000 miles NOTE: The rattling in the audio is NOT the car!! I had the windows partially down and was traveling through some traffic when I shot this video.
1996 C220 Driver's Seat Cushion Replacement
zhlédnutí 883Před 7 lety
1996 C220 W202 - I replaced the driver's seat cushion It was not in terrible condition but was starting to crack and the seams are starting to pull apart. Passenger-side and driver's-side seat cushions are interchangeable!! NOTE: E12 Bolts secure the seat to the floor; 17mm bolt attaches the seat belt to the seat Thanks Fupabox!!!
1996 C220 - Sunroof Drain cleanout
zhlédnutí 1,8KPřed 7 lety
I had water pooled up in the front passenger footwell this winter after an exceptionally hard rain. I originally thought this was due to a leaky door gasket. The solution was to clean out the sunroof drains.
Dog Time!!
zhlédnutí 27Před 7 lety
Dog Time!!
1996 C220 Sunroof Drain cleanout
zhlédnutí 1,1KPřed 7 lety
1996 C220 Sunroof Drain cleanout
1996 C220 Smoke Test - Evap Leak
zhlédnutí 11KPřed 7 lety
1996 C220 Smoke Test - Evap Leak
1996 C220 W202 Engine Wobble
zhlédnutí 52KPřed 7 lety
1996 C220 W202 Engine Wobble

Komentáře

  • @suchattrakulyingyong1515
    @suchattrakulyingyong1515 Před 5 měsíci

    don't see fluid change ,what u do

  • @user-fc3lw5vt9d
    @user-fc3lw5vt9d Před 5 měsíci

    Show me how to adjust my cluch cable

  • @user-fc3lw5vt9d
    @user-fc3lw5vt9d Před 5 měsíci

    I have problem with my gears please show me how to adjust please

  • @alm9576
    @alm9576 Před 10 měsíci

    fuck yeah just what i needed

  • @arrisianoverloard7043
    @arrisianoverloard7043 Před 10 měsíci

    Why don't you use a pointer stick so we can see what you are attempting to show us.

  • @christophersabatini

    I had the same problem and it ended up being the magnetic cam shaft attenuator. The round thing at the top front of the engine. Easy easy fix

  • @markfrost2707
    @markfrost2707 Před rokem

    so, you thought to start after youve removed the cluster?? That is why i came on here

  • @christophersabatini

    Hey Andrew did you ever get to the bottom of this? I am having the same issue

  • @rizalsaiful6058
    @rizalsaiful6058 Před rokem

    When the adjustment or re adjustment needed?

  • @rizalsaiful6058
    @rizalsaiful6058 Před rokem

    What is function of bowden cable?

  • @josealbertomendozamartinez2854

    Mi mercedes c220modelo 1996 no arranca da marcha pero no prende que puedo hacer

  • @DrawThingsZach
    @DrawThingsZach Před rokem

    That's wear I pour my Transmission fluid into?

  • @adamsmith4537
    @adamsmith4537 Před rokem

    Hi sorry to bother you. do you still have the part number of this EGR and where.I can buy it please .?

  • @dustblowboro
    @dustblowboro Před rokem

    So, when my car has VERY late shifts for 3rd and 4th gears (approx at 4000 rpms), I need to adjust that cable clockwise?

    • @nehuge
      @nehuge Před rokem

      Yes, clockwise as if you were sitting in the car facing forward

  • @trunkingham
    @trunkingham Před 2 lety

    Very helpful, thanks

  • @mariamargarida6077
    @mariamargarida6077 Před 2 lety

    Order. Dainjeccao. Domotor220gasolina. 4cinlindos.do.ano1993

  • @salehfiras943
    @salehfiras943 Před 2 lety

    Hello!My engine is a m111.960 doing the same thing what was the cause in your case i did all the changes u did including harness and everything!

    • @earthsoundtv
      @earthsoundtv Před 2 lety

      Have you found a solution? I'm having the same issue after I replaced the top gasket

  • @janoperez73
    @janoperez73 Před 2 lety

    Thank you for your video! How many liters for replace oil?

  • @DimitrisDadoulis
    @DimitrisDadoulis Před 2 lety

    at 1:39 where that green conects to? my car missing it, there is only the black and white

    • @giorgio2282
      @giorgio2282 Před 3 měsíci

      Also in mine, maybe is normal? I don't think, mine has also some problems when you push all the gas at low rpm

  • @whatisrelative5586
    @whatisrelative5586 Před 2 lety

    Would this be the same for a 99 C 200 W202

  • @ioanardelean1936
    @ioanardelean1936 Před 3 lety

    Never trust those cement blocks, they crush like eggs the way you set them, only flat how they suppose to lay they sustain a lot bigger weight... But straight down... If one of your wheels/ramp would fail that would be a diagonal force that would brake the blocks like wood sticks... You put them there for pice of mind that won't work... :). The way you set them they hold like a pocker cards castle... The ramps should hold 2 tons each one... So you should be more than safe...

  • @karelgericke3858
    @karelgericke3858 Před 3 lety

    Headgasket what a joke, fuel line, or spark loss is your problem. Why would the Headgasket makes it wobble, no ways.

    • @earthsoundtv
      @earthsoundtv Před 2 lety

      It's happening to me now. Plugs are all working fine, fuel supplying well. But once you engage the gear, the engine goes off, no mater how you trotle.

    • @earthsoundtv
      @earthsoundtv Před 2 lety

      Please find time to respond.

  • @BobBenz55
    @BobBenz55 Před 3 lety

    Top boy... will do this on my C36 and my W124's. 🙌

  • @ronalddingo2549
    @ronalddingo2549 Před 3 lety

    W202 c180 engine M111 has EGR ?

  • @edmorechauke6599
    @edmorechauke6599 Před 3 lety

    Hie ,he many L u can pu

  • @lawrencenorman1427
    @lawrencenorman1427 Před 3 lety

    Engine mounts

  • @Mitutumuch
    @Mitutumuch Před 3 lety

    HEYwhered you get that manifold from?!?

  • @lenliz2003
    @lenliz2003 Před 3 lety

    hi. i have the same engine and my ccar is crazy on fuel. on a 60L full tank i get 250-300km. thats 4-4.5km/L. please help

  • @redeemernigoohaem9735

    Do you know if c220 w202 fit with c180 w202, same year of course . 1995

  • @deanmunoz5827
    @deanmunoz5827 Před 3 lety

    I have a p0177 and a p0170 It shifts hard I replaced both o2 censors Maf Egr And check engine still comes on ?☹️ Bank one fuel trim?! I’ve takin it to several shops they don’t FIX IT I can’t pass smog what do you think it is? I’m thinking new fuel rod Plugs And injectors

    • @andrewfitzpatrick2689
      @andrewfitzpatrick2689 Před 3 lety

      Try running a half tank of 91 or better octane fuel on freeway Since you replaced maf and egr then it sounds like maybe short distance driving has built up residue in the throttle body The hard shift for mine was clutches wearing out in the tranny

    • @deanmunoz5827
      @deanmunoz5827 Před 3 lety

      96 benzman yea the Benz shop has connected a “vacuum line” that smoothed the shifting But it apparently comes off everytime they do it But everytime I take it in they clear the code connect the vacuum and repeat I’m not sure what line they keep connecting but I’m sure that isn’t the cause of the code on going to try the injectors cleanse and see how it goes

    • @deanmunoz5827
      @deanmunoz5827 Před 3 lety

      96 benzman it turned out to be the tranny line to manifold that wasn’t connected (hardshift) smoke test verified it. Check engine light still came on after 😡 shifts smooth now though

  • @muammerkaracoban5612
    @muammerkaracoban5612 Před 4 lety

    Hıı Oil capactiy? Plase

  • @otabektursunkulov368
    @otabektursunkulov368 Před 4 lety

    Is there an egr on the 180 w202? If there is one where it is, please respond if you know

  • @otabektursunkulov368
    @otabektursunkulov368 Před 4 lety

    On the c180 there is an egr 1999 issue

  • @blainequinn7709
    @blainequinn7709 Před 4 lety

    Its millimeter.

  • @blainequinn7709
    @blainequinn7709 Před 4 lety

    Thus is all wrong.

    • @ahmadlbl
      @ahmadlbl Před 2 lety

      Hallo can you help me in adjusting it friend do you have a correct procedure

  • @bobbobby8396
    @bobbobby8396 Před 4 lety

    Will this HELP if it's slipping in FIRST??

    • @1319nm
      @1319nm Před 3 lety

      My car 1994 C220 just got slipping 3 months ago. But I do not want to spend too much time and money to fix it. So I am looking for any lubricate oil to bring it back. And I did found a liquid not oil based to fixing my car. The liquid is nano molecule and base like water. It is only 20cc to fill into the transmission tank. Cost me about USD 150.- It works like a magic!

  • @fixittony
    @fixittony Před 4 lety

    Thank you for the video. I am changing my W202 chasis '94 C280 this weekend. I was planning on draining the torque converter. Did you have a magnet in the pan or place one on the outside?

  • @thelenzperspective8297

    If you look at where that cable goes there are index marks that you are supposed to line up while the engine is at idle...

  • @shawnireland1197
    @shawnireland1197 Před 4 lety

    I have a 1996 Mercedes c220 with 180,000 hoping it lasts a little longer

  • @nasarazam
    @nasarazam Před 4 lety

    How long did you had the car for now?

  • @nasarazam
    @nasarazam Před 4 lety

    These are such nice clear short videos - Excellent Job. Do you still have the car?

  • @tobydyes
    @tobydyes Před 4 lety

    are you a real mechanic I don't think you are transmission fluid is that color because the clutches are burning out in transmission

  • @RajSingh-xo3sp
    @RajSingh-xo3sp Před 4 lety

    Did you check your motor mounts. Let me know my car is doing the same thing. Thanks.

  • @dogangunes23
    @dogangunes23 Před 4 lety

    Yapabilen var mı beyler ?

  • @danielmelchionno2797
    @danielmelchionno2797 Před 4 lety

    Hi 96 benzman, what was causing the wobble?

    • @andrewfitzpatrick2689
      @andrewfitzpatrick2689 Před 4 lety

      Bad belt tensioner. Replaced the tensioner and replaced the belt and that fixed the problem

    • @danielmelchionno2797
      @danielmelchionno2797 Před 4 lety

      @@andrewfitzpatrick2689 Was the amber engine light also on? I have the wobble but I think there might be something more to it...

    • @andrewfitzpatrick2689
      @andrewfitzpatrick2689 Před 4 lety

      @@danielmelchionno2797 Read your codes first to isolate your issue - Mine did not have the CEL light on

    • @savvasgreece8700
      @savvasgreece8700 Před 4 lety

      @@andrewfitzpatrick2689 you mean the whole tensioner? or just the shock absorber of tensioner?

    • @salehfiras943
      @salehfiras943 Před rokem

      @@andrewfitzpatrick2689 so after everything you did with fuel filters and coil packs it was just a bad tensioner?

  • @loganv3864
    @loganv3864 Před 4 lety

    How much fluid did you fill it with after just dropping the pan?

  • @thomashaas875
    @thomashaas875 Před 4 lety

    Does anybody know what the gold stuff on the motor is? Best way to clean it?

  • @SathanaST
    @SathanaST Před 4 lety

    Thanks!!! This totally transformed how the car shift! I worked!!!!!

    • @andrewfitzpatrick2689
      @andrewfitzpatrick2689 Před 4 lety

      I'm glad it helped

    • @ell7851
      @ell7851 Před 3 lety

      I have a 94’c200. The cable look the dame but i need to know if i’m right: screw the cable to shift Earlier, unscrew to shift latte. Is it correct? I have also another question: sometimes the car don’t shift down when i press the accelerator, it happen when i’m driving at 60,70 kmh and after a brake (to make a round for example) it would be good if the car shift down 1 gear. Any idea?

    • @SathanaST
      @SathanaST Před 3 lety

      @@ell7851 you understand it correctly. This old auto gearbox is not very smart. Sometimes you have to activate the kickdown button to make the car downshift. I believed it is normal.

  • @akalif5037
    @akalif5037 Před 5 lety

    Fuel Lines man, just replace all d hoses from rubber to nylon..It did my w202

  • @prakersa
    @prakersa Před 5 lety

    Just wondering w202 uses 236.6 or .7?

    • @andrewfitzpatrick2689
      @andrewfitzpatrick2689 Před 5 lety

      The sheet spec for the 1996 W202 is 236.14 - Mercedes ATF 134 is compatible with this Check this at a dealer if your spec is 236.6 or .7