- 30
- 38 202
Andy Mendenhall
Registrace 10. 02. 2008
How I wired my Missour Wind and Solar Charge Controller
500 watt turbine, 100 watt solar panel connected. Experienced people with this equipment, please let me know if this is wired correctly for peak performance. Please no negative comments, just please comment on things displayed in my set up instead of telling me I bought your competitor's products.
I noticed at 2:00 I wrongly stated wire size, I will be going from a 10 to an 8 gague wire here, and comments are welcome for wire sizing. Solar is about 25' away from this board and the turbine ac wire is just an old extension cord probably 12 gague and runs around 50'.
Here is my turbine mwands.com/store/wind-turbine-products/wind-turbine-generators/500-watt-7-blade-basic
Here is my solar panel www.amazon.com/gp/product/B00V4844F4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
And my inverter www.amazon.com/gp/product/B00XJCVC44/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The turbine, charger, diversion, and relay from Missouri Wind and Solar.
I noticed at 2:00 I wrongly stated wire size, I will be going from a 10 to an 8 gague wire here, and comments are welcome for wire sizing. Solar is about 25' away from this board and the turbine ac wire is just an old extension cord probably 12 gague and runs around 50'.
Here is my turbine mwands.com/store/wind-turbine-products/wind-turbine-generators/500-watt-7-blade-basic
Here is my solar panel www.amazon.com/gp/product/B00V4844F4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
And my inverter www.amazon.com/gp/product/B00XJCVC44/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The turbine, charger, diversion, and relay from Missouri Wind and Solar.
zhlédnutí: 281
Video
Missouri Wind and Solar Confederate 7 blade wind turbine
zhlédnutí 1,4KPřed 7 lety
Missouri Wind and Solar Confederate 7 blade wind turbine
Save on your electricity bill with this cheap gadget!
zhlédnutí 94Před 7 lety
This device was bought to monitor energy made by future wind turbines, but doubles as a checker to test things that are always plugged in. Turns out my purchase will pay for itself in less than 4 months after on energy sucker. www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU/ref=sr_1_1?s=hi&ie=UTF8&qid=1482457307&sr=1-1&keywords=P3 P4400 Kill A Watt Electricity Usage Monitor
John Deere 318 with 47'' snow blower
zhlédnutí 3,1KPřed 7 lety
1987 model John Deere 318 tractor with 47' snow blower. Just brought this home from Williston, ND. It moves 20'' of snow easily, last night's 3'' was nothing to run through quickly. I'm having an issue with the wiper currently is why it wasn't running; if we have some time without snow clean up on the farm I'll find the time to look into it.
First test of my bicycle generator
zhlédnutí 92Před 7 lety
I used mostly recycled parts to this including old rusted bolts, scrap wood, and scrap metal for the frame. I paid $18 for a pulley, $28 for the belt, and $5 for the angle bracket that the motor is mounted on for a total of $51. I'm using a half horse DC motor that use to be used to retract a hose reel. I will need to wire in a charge controller and a deep cell battery as pedaling is not consta...
First time using our lifestock scale
zhlédnutí 41Před 7 lety
I spent several hours repairing boards on our lifestock scale, pressure wahing, priming, and painting the first coat today. We figured it was time to settle it once for all the big question of how big our sheep is. The answer is 275 lbs :)
Manure Trolley in one of our barns
zhlédnutí 15KPřed 7 lety
I show off our manure trolley in action with Summer.
Our chickens summer 2016
zhlédnutí 22Před 8 lety
A look at our coop and outdoor runs for the 18 chickens, 2 guinea foul, and 2 ducks.
Minecraft Iron Farm explained and how to build
zhlédnutí 140Před 8 lety
Built on survival server IP mt.gg In this video I describe how to build an iron farm. Minetown is part of the Eximius gaming network If you have questions please comment and subscribe.
Minetown, how to make a subdivision and claim land MT.GG
zhlédnutí 1,3KPřed 8 lety
Here I show some information about the Grief Prevention plugin and how to make a private claim and subdivisions.
Minecraft Auto Smelter Maximum Efficiency MT.GG
zhlédnutí 151Před 8 lety
Here I show an overview of my Auto Smelter design with 25 furnaces. Simply input fuel in 1 chest, things to cook in 1 chest, and output into chest.
Eximius How to add a character
zhlédnutí 64Před 8 lety
In this video, I highlight how to register for the forums and add a character for Minetown mt.gg, the process should be the same across the board of the Eximius Gaming Network.
New Public Farms on Minetown MT.GG
zhlédnutí 108Před 8 lety
IP: mt.gg /home dteandy warps Here I show you a tour of each of the new public farms i set up. Find me in game: dteandy Server: mt.gg
Minecraft how to use sign shop with craftbook mt.gg
zhlédnutí 142Před 8 lety
This example shows how to charge entrance to an area for a set amount of time, then move them away when the time expires. server: mt.gg
DTE Lawn Care and Landscaping compairing a good irrigation system to a poor design
zhlédnutí 500Před 12 lety
DTE Lawn Care and Landscaping compairing a good irrigation system to a poor design
DTE Lawn Care and Landscaping preparing soil for sod
zhlédnutí 3,5KPřed 12 lety
DTE Lawn Care and Landscaping preparing soil for sod
DTE Lawn Care & Landscaping Bamboo Removal
zhlédnutí 384Před 12 lety
DTE Lawn Care & Landscaping Bamboo Removal
Down to Earth Lawn Care and Landscaping (DTE) Shrub tear out
zhlédnutí 189Před 12 lety
Down to Earth Lawn Care and Landscaping (DTE) Shrub tear out
How to prune your Japanese Maple with DTE Lawn Care and Landscaping
zhlédnutí 4,3KPřed 12 lety
How to prune your Japanese Maple with DTE Lawn Care and Landscaping
Down to Earth Lawn Care and Landscaping Landscape Rejuvenation
zhlédnutí 166Před 12 lety
Down to Earth Lawn Care and Landscaping Landscape Rejuvenation
Down to Earth Lawn Care & Landscaping (DTE) beginning of a clean up job
zhlédnutí 254Před 12 lety
Down to Earth Lawn Care & Landscaping (DTE) beginning of a clean up job
Time lapse dray stack retaining wall construction
zhlédnutí 560Před 12 lety
Time lapse dray stack retaining wall construction
Down to Earth Lawn Care and Landscaping: Exmark With Ultra Vac
zhlédnutí 2,9KPřed 12 lety
Down to Earth Lawn Care and Landscaping: Exmark With Ultra Vac
how to remove the sub divide claim
If I trust people on my normal claim does that mean they also have access on the subdivide claim even if I dont trust them in it?
direk james
Anybody have any of these laying around? We are in need of a tandem trolley for our Jamesway and cant find one.
Hope you post a couple more videos of the manure trolley. They're neat to see in use. I used one a long time ago to clean out the barn at my grandparents farm. This was long after they got rid of their hogs. I was just cleaning up the "leftovers" & whatever bedding that was left behind. Worked great! Still hanging there. Might make a short video of it at some point.
You did that with just wheel weights and chains? No suitcase weights? Wow!
Good ol's ways of the good ol' days ! Equipment made to last a lifetime if not a couple lifetimes unlike the mass produced junk being made in china and india
Our barn was a jamesway. It had switches for each of 3. Alleys
Looking for one of these to put back in our barn
Those save you so much time and work. Dairymen used these to do the whole barn, milking stalls and box stalls. Some dumped it on to a wagon or manure spreader and even on the ground all winter long then in the spring either by hand or with a tractor with a loader load up the spreader to remove the large pile so it could fertilize the field before spring tillage and planting.
Hey dte
seeing this now, solar it is! already have electronics set up to receive solar.
Andy You have some problems with your install that can easily be fixed and increase your output. 3 people on here are Thermodyne dealers and will mislead you with there misinformation, most of which are lies. One of them is this guy , John Daniel aka Јохн Даниел a Thermodyne dealer. Jason Brown has our wind turbines up and into grid ties for about 5 years now with no problems. You should check out Jason Brown's installs.
Their comments have been removed. Please advice if this is done properly czcams.com/video/l5y4dafneWk/video.html
Way to go Andy!! I'm proud of you!!
Very Nice
sweet dude..looking at one for my 318...
Jealous of that cab. Love the 318s
Great design! Just a few questions: 1. How did you get that mini map? 2. The way the minecart loading station worked - you couldn't put any powered rails on top of the hoppers to make the minecart's entire trip faster. If you had a station that worked differently and allowed you to have all the rails on top of the hoppers be powered rails - would that increase the smelting speed? (not counting the speed which the hoppers move the items since that is already maxed in this design)
+Zapperzz99 The minimap is called Journey Map, you can search google to find how to install it. Using more powered rails wouldn't work with the return station, since the cart has to come in at exact speed to stop half way on the detector rail and powered rail; I don't believe more powered rails would increase efficiency. If you wanted to add more powered rails, you would want to 1. use hopper minecart; 2. add blocks to the edge of the redstone blocks, so the cart bounces back on its own (get rid of the current loading station) 3. centralize the downward facing hopper, but use 2 hoppers under a double chest to feed the cart running back and forth. Even with the aforementioned, I'm not sure that 2 hopper loading the hopper minecart at that speed would work to fill 25 furnaces. If you try and it doesn't you may need 2 sets of 2 downward facing hoppers and 2 separate inputs for maximum efficiency. The IP I play is MT.GG, you are welcome to come explore and discuss more if you are curious.
Thank you! The reason I asked is because the server I like playing on has the craftbook plugin installed. Craftbook pipes can move items anywhere within 4 chunks of you at 1 stack per tick (in the best case scenario). So I could use the craftbook pipes in place of the hoppers under the furnaces. That would remove the speed limit that is set by the hopper moving speed. Then the only thing limiting me is the speed that the minecart travels. If you have any additional advice for a very fast minecart distributing system that would be awesome :) Your solution using the hopper minecart & powered rails is likely what I will end up doing.
I would be interested in a screen shot of your finished product with the craftbook pipes we have them disabled on our server
his people of commants
oh hi :)
I have since left the business and started working for BNSF in North Dakota. If you view and have questions I am available to those, if you call for that please state that in your voice mail or message here so I don't think you are a landscaping lead.
Very cool man :)
Dude! You're still playing minecraft?! Not sure how I stumbled on this video, anyway. Peace. Love, Jonny K.
+Jon K you must be subscribed to me brother. You will see more soon that i learned how to record my screen :P. Miss you dude!
+Andy Mendenhall Hell yeah. miss you too brother man. I'm living in OKC now. We should meet halfway and hang out at some point.
Lame....
I've never been there. Grayson is about 1.25 hr from my home base. I'll remember the referral if I get any stone work in that direction...
The houses on this street have high pressure and high flow. I measured 85 psi on both homes, and 20 gallons per minute on the property that we installed irrigation on. Likely, the house across the street doesn't have a pressure regulator, and because of this their heads have to be tuned down, causing a mist effect that wastes lots of water.
Looks great! Have yall ever done business with Buck Jones Nursery in Grayson? They have a nice stone yard..
Awesome...
I like how you showed the other system and the water loss. Yours does look better. I thiink Ive seen your trucks before!!
@MrKunsherman at your house? I'm assuming we've done some work for you...
@MrKunsherman at your house? I'm assuming we've done some work for you...
Iv seen you around im in peachtreecity
@bobcat101100 Toro makes exmark. Very little differences between the 2 machines...just a bit different components on the deck, I believe. Also check out Walker mowers...they give an awesome cut, if you are willing to drop the cash for one.
@bobcat101100 2 tanks. I think its 13 gallon fuel capacity.
It also only takes about 5 seconds to back up pull the lever and move foward, so I dump when I think its getting full....
@bobcat101100 The grass clippings and leaves will start to blow out of the impeller instead of going up the tube when its full. Most of the time I dump before I need to because I'm in close proximity of a dump site. I also dump it before changing areas (say going from front to back lawn). I can cut about 5,000 sq. ft. before dumping, which depends on the thickness of the turf, number of weeds and amount of debris, and etc...)
The Ultra Vac is a QDS model (Quick Discharge System) and does not have a bag, instead it is one solid unit that dumps by the pull of a lever instead of emptying bags. This model packs a full 7 bushels before dumping. The 50'' model would have 2 bags in the cheaper model (which is $400 less), where the 60 and 72'' models have 3 bags. The vac was $2726.36, special ordered for a 50'' deck. Hope this helps Mr. Bobcat.....