Video

Thank you for sharing your experience, I'm thrilled it worked for you!

I believe the thread sizes are the same for all above ground pool. I never had Intex pool. My first pool was a Bestway using a 1.25 hoses and the one I'm using now is a Coleman with a 1.5 hoses but the threads for inflow and outflow from inside the pool are the same and I can use this product on them. Simply remove the cover from the side where the water goes back into the pool and put the included adapter that came with this product.

The leak happens to be oil soaking through the hose near the metal connector so I started at the metal part so I can put more pressure on it. If I remember correctly, I did 2 layers. From the metal part, I wrapped it and went over 2 to 3 inches over where the actual leak is then went back to the connector. Just a reminder, this is not a permanent fix. But this patch gave me enough time to gather the information I needed to learn how to replace the part by myself to save money. I eventually have to replace my hose as you can see in the video link below. czcams.com/video/v9iJjTtdWzc/video.html Good Luck.

You're most welcome

I'm glad to help. If you have that symptom, your power supply may need to be replaced so better start looking for deals.

@@Overly_nourished_entity The weight of the pool will probably hold the pole in its place but don't quote me on it. Regarding the slab, what's more important is the material of the base and how compacted the base is. The slab can crack if the base gives in. Hope this helps.

Sorry, I don't understand the question. The google translation does not make sense either.

Thanks for sharing.

After you add the drops to your pool water, that whole chamber from top to bottom will be the same color. Then you compare your pool water color to the five other colors next to it and see which one is closest. It won’t be an exact reading like you get at the pool store, but it will get you close enough. Hope this helps.

@@iCandiMandy I just saw this but it looks like @johnwilliams6663 already gave a clear answer.

@@johnwilliams6663 makes sense ..any idea why my cl is coming back orange?

Thanks for the feedback! Let me know if there's anything else you need help with.

I'm glad you found the tips helpful!

Thank you for watching the video and good luck with your setup! I hope you are in good hex so you can ROI quickly. I think they made the change recently. My POC rewards is now averaging around 3,000 mobile daily.

@@sherluck271 This is a 2007 Odyssey.

Awesome! Glad I could help.

I'm not sure this will float for a long time cause water can get inside.

kinda like what u have, i can still faintly see the dot and u hv it full already

If you can see it at full the CYA is still low, you can add a little more. The camera lens can actually see better than the naked eye. If you can faintly see the dot then your CYA is right about at 30ppm or a little lower. Ideal is between 30 and 50 but if you are using chlorine tablet, it will raise your CYA overtime so if you are not losing chlorine quickly you should be good.

Salamat din.

Thank you for your kind words, I appreciate it!

Thank you for watching and trying out the pump tip!

Thank you for trying it out! Your success means a lot to me.

That's awesome to hear! So happy it worked for you!

I would love to see that. Let me know when you have the video up. I will be the first to watch it. 😃

Sorry the solution did not work for you. But you can see in the comment section that the technique was able to help a lot of people. The eventual fix for this computer is to replace the power supply but this method worked for me for a couple of months before I was forced to replace the PSU.

Thanks for the input. I tried that with my garden hose jet type vacuum with multiple socks but the dead algaes are too small and just shoots back up into the water. You probably get less than 5% and the rest just goes through the the sock. This method does it faster.

No. You won't feel any on the suction side. You can feel the water going out on the outlet (A side) back to the pool. If you are using the same pump, you should feel the water up to a foot on the A sde. If you can feel it drop down to around 6 inches then you want to clean or replace the filter.

Thanks for checking out the video, hope you learned something new!

Look at this as hybrid bike. It does have all the component of a regular bike plus a motor and battery built in. You can choose to pedal manually, with help from motor or full motor. So, yes it does have a chain. Now if you are looking for a chain to lock it, then that will depend on where you use and park your bike. If you are concern about the battery getting stolen, it does come with a key to lock it in place. Hope this helps.

@@Cloud-wh6np it's great to hear that. I'm still loving my bike. It runs great and it's quiet.

@@diymanual I love how little noise the engine makes. That was an unexpected plus. Did you have to adjust your gearing at all? My only complaint is I can't get one of the left handle gears to engage fully on the highest gear, so it might need a tweak. I mostly just use the throttle anyway, but it'd be nice to be able to help the motor out at higher speeds. Edit: Typo

@@Cloud-wh6np No. I'm surprised that the bike is tuned really well. I did not have to make any adjustment. Maybe try to contact the manufacturer and see what type of help their support department can do to get it working properly?

@@diymanual not a bad idea. I'll do just that first

@@diymanual I'm an idiot.... I turned the left handle barrel adjuster counter clockwise quite a bit. That seemed to fix the issue. 🤦‍♂️ I finally got to the highest cog in front, and can finally pedal the bike beyond its max speed

@@baconboi2696 1. Make sure that there's no kinks in your hose. 2. Start with the hose in the pool close to the surface as the process needs gravity to pull the water to the other end. The outlet side needs to be lower than the other end. 3. Make sure to fill the hose completely with water then quickly toss the outlet end to the ground. Let the water flow for about 30 seconds before you start vacuuming.

You're welcome

Happy to help

@@womanatwellworshiptheFather Thanks for the comments. Please let me know how it goes, It will be nice if it works so you don't lose any water.

@@diymanual i will let you know tomorrow

@@womanatwellworshiptheFather ok. Will wait for the result. Thanks.

Did you get the chance to try the aquafish vacuum/

@@diymanual yes, it does not work sadly.. It does not vacuum to waste and just spews brown turbulent ick into the water...vaccuum to waste is the only solution

@@ajaxsf Hi. I actually asked the same question to Vevor support. I was told that it is the sleeve for removing the spark plug. Hope this helps.

@@diymanual Thanks! That's a huge help and thanks for this video.

Thank you for sharing your experience! I'm thrilled my video was able to help you get your pool back in shape.

@@proxx9531 This is designed as kids bed. If you can sit on the first step of a stair and stand up with no problem then you should be fine. But you might bump your head on the top bed frame. I'm 5' 5" and I can go in without any issue.

So happy you found the video useful! Thanks for watching!

Thank you for watching and giving it a try! Your support means the world to me.

As long as the Ethernet cable from your room is plugged into the modem/router then you can plug this into that wall. Think of this as a WiFi extender for your network.

You're welcome!

Omg I DID THIS!!!! Good thing u were smarter than me

@galaxophone - Putting it in the skimmer is actually the preferred method according to the instruction in the package. But my setup and most above ground pool setup does not have a skimmer basket available so this is the next best option to prevent the granules from settling into the bottom of the pool. Also, some pool owners advise not to place chemicals in the skimmer as high concentration of chemicals that gets pulled into the filter might damage the equipment.

This is exactly what I do. I have a skimmer sock on my skimmer and I just pour it directly into it.

You're welcome! I accept payment in likes and comments.

Thanks for sharing your thoughts on electric bikes!

Sounds to me you went to a bike shop and someone was trying to close a sale on you.

Thank you for the reminder to always handle chemicals with care.

Came to say this! That's literally acid. 😂

You are correct. I know the exact location where I want to place the hook that is why I just drilled a hole to see if there is a stud available in that location, I'm not moving my install to where the stud is so I am not really searching for a stud.

Thank you for sharing your experience! It's comments like yours that make creating these videos so rewarding.

Hey, thanks for checking out the video! Socks really do have more uses than we think, right?

Glad you enjoyed it!

It's not. It could be a expired or been exposed in the sun reagent? Also, some indicates that chlorine that is too high can sometimes give weird results. How's your chlorine and PH level?