Master Vevor Plate Compactor: Setup and Use Like a Pro

Sdílet
Vložit
  • čas přidán 2. 08. 2024
  • Looking to get your landscaping or paving project done faster and more efficiently? Check out the Vevor Plate Compactor! This machine can quickly and easily compact your asphalt, paving, base materials and driveway surfaces.
    If you're looking to get your landscaping or paving project done quickly and with less effort, then the Vevor Plate Compactor is the machine for you! In this video, we'll show you how to set up and use the machine, so you can get your project done faster and with less hassle!
    Amazon Affiliate Links
    This Product: amzn.to/3vxyNwX
    Larger Option: amzn.to/48E5OWH
    Other Compator Option: amzn.to/3H68kJo
    ---------------------------------------------
    ❤To Support our Channel❤
    ► LIKE! 👍
    ► COMMENT! 💬
    ► SHARE! ➤
    ► SUBSCRIBE! 👉 www.youtube.com/@DiyManual/fe...
    ► TURN ON THE NOTIFICATION BELL! 🔔
  • Jak na to + styl

Komentáře • 24

  • @diymanual
    @diymanual  Před 7 měsíci

    👍 If you found this video helpful, make sure to smash that "LIKE" button and "SUBSCRIBE" for a steady stream of DIY knowledge and product review! Stay empowered to tackle any project around your home, car, or pool with confidence. Let's get hands-on and make life easier together! www.youtube.com/@diymanual?sub_confirmation=1
    And if you are planning on making a purchase on Amazon, you can support my channel by using my Amazon affiliate link below. Purchasing through an affiliate link does not cost you anything extra but it helps support the efforts of small creators like myself.
    Vevor 2.8HP 1920lbs: amzn.to/3TSRQMr
    Vevor 6.5HP 4200lbs: amzn.to/3tDXveL
    More Options: amzn.to/3vjnxUS
    Main Affiliate Link : amzn.to/3Ha4fny
    Thank you for your support.
    🏡🚗🏊‍♂ #DIYLife #SubscribeForMoreDIYTips

  • @cyah9713
    @cyah9713 Před měsícem +1

    PERFECT!!!! Just got mine yesterday, the factory clip with NO SOUND...SUCKED!!!! Yours is perfect and direct to the point without knowing your dog or your kids names or staring at the camera with oversize rainbow sunglasses .... Thanks brother and keep them coming.,

    • @diymanual
      @diymanual  Před měsícem

      Thank you for the kind words! I appreciate your support.

  • @clem95627
    @clem95627 Před 3 měsíci +1

    Very clear step by step detailed instructions on how to set up and start the compactor. Well Done.

    • @diymanual
      @diymanual  Před 3 měsíci

      Your feedback means a lot, thank you for watching and appreciating the effort put into the instructions.

  • @tacroom12
    @tacroom12 Před 2 měsíci +1

    Thank you very much for this detailed video. It is a great help! Made the assembly and getting started quick and painless. Thank you again!

    • @diymanual
      @diymanual  Před 2 měsíci

      Your kind words mean a lot to me. Thank you for watching and sharing your feedback!

  • @renegadegold592
    @renegadegold592 Před 2 měsíci

    Came here for the rubber band. Thank you.

    • @diymanual
      @diymanual  Před 2 měsíci

      Thanks for stopping by! Stick around for more fun content!

  • @aprilirenewilkins
    @aprilirenewilkins Před 2 měsíci +1

    Thanks for the great video! It helped a lot with getting mine set up.

    • @diymanual
      @diymanual  Před 2 měsíci

      You are welcome. I'm happy to help.

  • @cmbrownell
    @cmbrownell Před 3 měsíci +1

    Very helpful video, good job.
    Only comment is Bar & chain oil normally has a tackiness additive and a solvent for tree sap. It should never go in an engine.

    • @diymanual
      @diymanual  Před 3 měsíci

      Thank you so much for your input, I appreciate you watching the video!

  • @ajaxsf
    @ajaxsf Před 20 dny +1

    Mine came with a tool that looks like a wrench to remove lug nuts. Did you ever figure out what that was for?

    • @diymanual
      @diymanual  Před 20 dny +1

      @@ajaxsf Hi. I actually asked the same question to Vevor support. I was told that it is the sleeve for removing the spark plug. Hope this helps.

    • @ajaxsf
      @ajaxsf Před 20 dny +1

      @@diymanual Thanks! That's a huge help and thanks for this video.

  • @devestv
    @devestv Před měsícem

    Finished putting mine together using your helpful video. I just need to tighten the throttle nuts tomorrow.
    The box had no damage but one of the oil cap was loose and machine was kind of covered in oil. I thought there is no oil in the motor itself.
    I also heard some kind of clinking noise in the fuel tank. Is that normal???

    • @diymanual
      @diymanual  Před měsícem

      I don't notice a noise in the fuel tank. Maybe take a peek inside the tank it's probably just a loose part?

    • @devestv
      @devestv Před měsícem

      Crazy, I removed the rubber band, and there was no hole. ​@diymanual

    • @devestv
      @devestv Před měsícem

      I think the rattle in the tank was the chain to the fuel cap.​@@diymanual

  • @gqdoggy
    @gqdoggy Před 3 měsíci +1

    Thanks for doing this. Woulda been nice if they put any of the setup info into the manual 🤦🏻‍♂️

    • @diymanual
      @diymanual  Před 3 měsíci

      Thank you for your kind words! I'm glad I could assist you.

  • @ednaturnbull8564
    @ednaturnbull8564 Před 2 měsíci

    Did you bother to read the manual? It should have mentioned starting a compactor on hard surfaces like concrete eventually damages the unit.

    • @diymanual
      @diymanual  Před 2 měsíci +1

      Thanks for the input and yes I did read the manual and you just made me look at the manual again to see if I missed it but I did not see anything about starting a compactor on hard surface will damage the unit. If you have the manual please let me know what page is it located so I can check again.
      I don't see a problem with starting it on hard surface, because simply starting it with throttle at low position like what I did on this video will not cause it to vibrate. I would assume you mean to not let this run on hard surface? Because letting this run on a hard surface with the throttle on 3 or above will damage the unit or even crack the surface as it will start jumping around uncontrollably. It's not in the manual too but it just common sense.
      This video is simply to show how to setup and start the equipment. I have another video on this where I showed how to actually run this to compact a surface. And thank you for commenting because I was looking for it to include the link here but it looks like I did not post it yet. I just moved all my old files in the storage and hopefully I was able to save it. I will post it once I found it.
      Thanks.