Video

When is this being rolled out? Updated my Gen 4 firmware and this update wasn't there. And will it be rolled out to 100L Brewzila?

This is great for me for brewing as the pulsing confuses my solar inverter and causes it to shut off. Is this functionality available through the RAPT portal?

Amazing!

Hey Kee, is this only for the BZ G4 65L? i've got the 35L no firmware updates available and it does not have the distilling mode available in settings Cheers Rob.

Now wouldn't it be nice if you could control the actual output wattage.. .. .. .

This is great do you have any vlogs on what temps you should be hitting and general guides/settings on how to use the brewzilla for distilling. Cheers 🍻

Absolutely awesome 🍻🍻 I've had more fun distilling recently than I've had in a good long time.

Where are these made?

Hello, good afternoon, I am using the CANNULAR machine, the same model in your video but I have a problem, the machine is not sealing the cans correctly, what could be the solution? Thank you so much.

any plan to use coils instead of plates in the future?

Did you change the plumbing on the 65l? Looks like you need to run the pump to use the tap in the pictured model? Or is there flow past the pump head?

gross. Maybe later we can all do shots of PFAS and take rips of BPA? Yeah, so MAYBE this doesn't have BPA, but it's got something else in it. Glass, stainless, copper or gtfo. Just because you can make and sell something doesn't mean you should. Shame on you taking advantage of people who don't know any better and don't have the money to buy proper safe gear. You know it used to be a lot easier and cheaper to use lead instead of proper solder or welding. Why would anybody even risk this dangerous junk? It's not even something that can't be easily made in a proven safe metal. It's only benefit is the higher profit margin. Like I said, gross.

I can't find anything about how this actually carbonates. Can you please explain?

Do you make these yellow o rings with a cross section of 7.5mm and ID of 90mm to suit my old Firestone kegs?

How do you clean the soda keg lid? Can it be soaked in PBW like other items?

No matter what length of line or what gas pressure i set. Foam? What am i doing wrong?

for a few years ive been using spare 2 liter bottles with a co2 cylinder to make sparkling water by the batch with chilled store bought water. I would love to have a continuous filtered sparkling water setup someday and not have to shake each bottle by hand this rig looks like the bees knees.

hopefully you fixed the sharp edges on the vents. I cut my finger so deep just putting the jacket on the gen4

I wonder if you can use a scale in the stand to see how much has evaporated. But I hope that you will improve the software. A lot of things don't feel right and some features are missing.

Damn, I need a love button for this vid. I learned more about PID in these 30 mins than I did in my uni years. Regarding the heat exchanger bottom plate: I definitely believe it should be standard. I just bought a Gen 4.1 BZ in EU these days (Aug 2024) and it wasn't there. I wouldn't mind paying extra for the part, but in Europe spare parts are not easy to find. I'm also thinking the plate should help with whirlpooling by separating the cone and not sucking it in through the middle.

I have a problem ,if I want to factory reset, how do I do it?

I bought a wireless charger for my Pill through AliExpress. Great idea and it worked fine the first time I used it. I plugged in the charging base today and am getting rapidly flashing sequential red and green lights, (it didn't do that before). Sadly the Pill will no longer charge on the Rapt base. I know I setup the Pill correctly because the coil "donut" is centered perfectly. Plus, the Pill seems to charge ok with my cell phone's wireless charger. The Pill light flashes and I can access it via the web interface when it's sitting on my phone's wireless charger. Is there a way to reset the Rapt charging base or is it cooked after just one use?

I had to order the new clamps because the old ones broke from bz and also from the extender after I used them for the first time. I had to improvise otherwise I wouldn’t be able to brew

I just gave up on my Duofiller G2 after 9 months because the pinch valve tubes got crusty and permanently kinked where the valve pinches them. I've seen CZcams where other brewers have this exact problem as well. This product may be too new to have witnessed similar issues, but it's probably a good idea to leave the tube outside the valve when not in use. Unfortunately on the Duofiller, that's not convenient because the valves are internal. Anyway, I just ordered this product and am excited to put it to use!

I have this one but am unable to make the clamps stay shit without locking them with a pin no matter what the adjustment using the pro lid. Any thoughts?

Hi Kegland, I have the Brewzilla Gen 4.0, and have upgraded the pump to 25W,. As per the new Brewzilla Gen 4.1, am I able to purchase a "65L BrewZilla Gen 4 - Silicone Tube Kit for 25w Pump" (if one exists). Thanks.

Will the new 65L Gen 4.1 be available in Canada? 🇨🇦

Really glad to see you have added a sight glass. It was the reason I never purchased your AIO, once you have a sight glass you cant live without it. Great work

Awesome upgrades 🍻🍻🍻

Plans for bigger brew houses? 500L?

It's probably my next brewery, Kee. I do wish that the pump was external.

I wonder why you did not include the HED in this upgrade. In the preview video of the HED you said you consider adding it to future equipment.

Would love to see a firmware update to add a pump icon to the top row with the heating and PID icons. Just changing the background around the temperature is too subtle and not intuitive.

That sight glass is one of those things. I didn't know how much I would love it till I used it. Can't wait to see the video on that new polyphenics line 🤤🤤

Great seeing Kegland listening and upgrading.

I have a kegland kegerator, would really love a wifi weight management system for kegs with managed app please...

Great! Are the heat exchanger now included? Any luck having more distributors in EU(switzerland) ?

@5:49 "TC Breakdwon"

Great to see that you are still developing it further and refining it. Looks good! I've always thought that the 65L is just a tad too small. It's almost enough to brew 3 kegs at a time (~60L vort) but there's not enough head space for the boil. That extension thing might solve that, I haven't seen that before

I dont have facebook. Anyway, the heat exchanger disc gets stuck to the bottom like a vacuum. When you try to pull the false bottom it gets bent and the heat exchanger disc goes from concave to convex. It should really be fastened to both eyelets so that its not bent out of shape. What works best is connect water hose to tap and run water in reverse.

Boil extender is amazing, but we need: A jacket for the boil extender PPSU for the boil extender And please, please develop compatibility for using Brewzilla RAPT with Brewfather. Brewzilla is a really good product, but it could be the best with some improvements ;)

Still happy with my 3.1.1 won't change unless it dies on me.

Ma per acquistarlo in italia come si puo fare?

Is there a way to use it without internet? I have my brewzilla in a barn without a wlan-connection and my first brews I just stood next to it and had to do the temperature settings by hand and at the right time

I get so excited when I get notified about these videos 😂

Is there a version with a built-in counterflow heat exchanger?

Hello!! from Brazil!! I appreciate all Kegland's products !! i'm fanboy Kegland..

I'm wondering if something could be done to prevent all the scratches inside the brawzila from happening when putting things in and out light to grain basket and the false bottom, scratches are also happening on the grain basket, It's the only thing I don't like with the brewzilla is those scratches that are happening. That would be a wonderful upgrade anyway!!! Cheers 🍻

Great new upgrades! Would you consider having a sale to help promote them in the 220v models? I've been dying to score one on sale, but haven't seen a sale since Dec 2022 on the Gen 4 - 220v models. Figured I could do a ton of videos on and brews on this bad boy.

I think I might have the Brewzilla 4.05.. I have the adjustable clamps, but they don't have the rubberised tops, and I don't have the sight glass. I really like the idea of the rubberised version. I can remove my adjustable ones, so are these parts available? Oops, found them.