Video

@@Acemans I do not think its meant to do so, but I never disassembled the camera. So i can't tell after all. Maybe someone of the other viewers can help here :)

@@mikelondres3874 Hi, thanks for your comment. Unfortunately, i can not tell because i never did more disassembly than removing the battery :/ But maybe some of the other viewers can help here :) Have a good one!

@@DrZirta Hi and thanks for you comment. I never opened a cyma like your, but a mosfet or even etu makes things a lot easier. Without, finding the correct combination of spring, motor and battery can be harder because you need the right cycle timing for semi. Active break mosfets and cycle detection etus can help here. Have a good one!

@@rummbolt hey thanks for the quick reply! This is my first foray into AEG modding so I’m a bit clueless! Can you recommend any affordable mosfet / etus? And did you use one here? :)

@@DrZirta in this particular case, i do not use any mosfet. But its a little advanced. If i were you, i would ask an experienced airsoft tech to do the first project built together. Or try it with an older replica you do not play very often. Chances are not low you could mess up the timing. Also, etu installation requires some experience. The easiest in my eyes would be a gate aster or maybe an ASCU. But also here: do your first steps in teching together with someone experienced - results AND learning will be best then in my eyes. Have a good one!

@@rummbolt Okay thank you! Sounds like i should enjoy my g36 as it is :)

@@kavenlesterababa hey hey, thanks for the comment :) I'm using multiple cameras - 40mm for bolt action sniping and 25mm on assault rifle distance. And also a headcam for sure ☺️ have a good one!

@@marchungus2088 sorry i can't comment on this, as i have not had those goggles in my hands yet - to give reliable advice, this should have been the case before at least once. But maybe some of the other viewers can comment on this? :)

@@rummbolt Thank you for the lighting fast response! Do the goggles have to be fully sealed for proper function? As the Evaders has 12 small holes in it.

@@marchungus2088 Haha no probleml, just got a message about your comment on the smartphone :) I think, ventilation holes should be no problem. With the Begadi Cp1, they work quite well - and those have looots of vent openings :D

@@rummbolt Awesome! Thank you for replying. I will order the unit now! :)

@@marchungus2088 Great! I hope you will have a good time and fog free gameplay with it ☺️

@@stanitzy8808 probably yes, i would go with the 25mm version then. Also, i would step away from bolt action when youre limited to 1j - but thats your choice how course :) Have a good time with your camera!

@@rummbolt i thought that too, but you know what i actually enjoy it. it was a gift and i wasn't so sure but after a couple of games i had a lot of fun. it's quite difficult as you gotta concentrate your whole gameplay in not being seen and i'm not that good tbh but it's fun. anyways, thank you! i'll probably use the scopecam both on my m24 and m4

@@stanitzy8808 as long as you enjoy it - of course, keep it going! Every hit you do with it must be feeling extra special, i imagine 😁 have a good time on the field!

@@atashli Hello there! I did not have it on mine, but unfortunately, some other users report the same in the comments. Maybe one of them knows a solution? I even wonder why mine seemed to be alright though ...

@@rummbolt lucky you! 😂

@@RedSonjaAirsoft hahahaha! Good idea, have to remember that one :D

@@wesleywaldron3050 yes! It's one of my favourite combinations at the moment ☺️

@@mariocasiraghi8505 I'm sorry, i do not have experienced this issue by myself. Maybe, some of the other viewers or the Runcam Customer Support can help here :)

@@fubene5495 thanks for sharing your experience that detailed - i'm sure many other viewers may be thankful as well :) i use the antifog unit myself, a very useful gadget. In my personal opinion, every new airsoft player should consider to use one!

@@David199701 thanks mate! I hope you can make some use of the outcome. Have a good one!

@@-Syke interesting, but i guess they also have some ventilation benefits, right?

@@rummbolt probably a miniscule amount. Though it will most likely be blocked by hair/ helmet etc. Just got my own CP1 and i have to say that airflow is really great. Moving already pushes enough air through the holes that it should prevent a lot of fogging. My only concern about the mask is, that you need to have a giant honker of a nose to really have a full seal. Wearing the mask i could easily push my pinky finker through the gaps at the nose. So using the faceguard or a face mesh that also covers the nose is a must in my opinion. Or maybe i will 3D print an insert to cover the gaps. Great review btw

@@-Syke I totally agree with the ventilation thing!! But my nose is average size i guess and i still feel quite well protected. Probably it's also a question of overall facial anatomy Ah, and thank you for the props for my review - always appreciated :) have a good one!

@@kugelblitz6572 Hallo, danke dir für den Kommentar! Freut mich, dass euch das Video gefällt - ihr habt da aber auch ein echt tolles Feld hingestellt! Viele Grüße, Felix

@@AirsoftbyTNTGermany Hi Tom - ja, zur CP1 hört man echt nichts negatives. Bin noch gespannt auf meinen ersten Einsatz ingame, die Erwartungen sind dementsprechend hoch! Die BLOG brille kenn ich noch gar nicht, muss ich mir mal anschauen. Danke für den Hinweis!

@@yogiebro2 es gibt Regelungen für öffentliche und für private Spieltage. Bei dem privaten zu dem wir als nächstes Fahren gilt Fullauto bis 1,8J. Soweit ich weiß wird nicht zwischen Indoor und Outdoor unterschieden bei dieser Regel, aber ein respektvoller Umgang mit dem Gegenspieler schadet nicht :)

@@rummbolt Danke für die Info! Wir überlegen nämlich am 25.8. zu fahren aber haben eher weniger Bock auf 1,3 j fullauto ins Gesicht 😅

@@yogiebro2 Auf jeden Fall Full Face Maske tragen für Nase und Zähne in Belgien. Die sind da nicht zimperlich ;)

i got the novrisch googles and i do use a malaclava with mouth and nose protection, it is a little bit more tight then low profile googles, but usable :)

Thats true, for me it´s part of the point "Accessories", as the face shield for the CP1 can be bought seperately.

@@wote2760 Great to read how many players are satisfied with the CP1. I wish we had those 8 years ago 😂

@@rummbolt bro, i have bought and gone through so many goggles looking for ones that work best with my glasses. hell no im getting contacts or goggle inserts as they are too expensive. CP1 goggles with the glasses lenses just works. I recommend them to any glasses wearing player I meet.

Aren't Nov goggles just resold Pyramex V2G-Plus? Afaik they are and if so they're dual lense.

Thanks for sharing your experience on the cp1 ! Nice you are happy with the solution. Have a good one!

Interesting idea to enable better ventilation on the Novritsch. Maybe i'll try this myself some times. Thanks for sharing - have a good one!

@@rummbolt gern geschehen 😉

Hey hey, thanks for you comment! My Novrtisch Goggles are still in pretty good condition after one year of use, but i try to handle them with care. The Ventilation System als can be applied to the CP1, maybe you have to grind down some of the upper side rubber because it´s a little more thick than on the Novritsch ones. On the durability of the CP1 Lenses, i can not comments, because I just do not own them long enough. But the first impression seems good to me :) Have a good one!

@@rummbolt gracias por tomarte el tiempo de responderme. Las voy a comprar, ya te diré que resultado me dan. Buen día para ti también.

@@thecoiltutoriales5238 Sure! Wanted to reply even earlier, but my phone did not allow somehow... better late than never :D Wish you lots of fun (and safety!) with your new goggles!

Thanks good sir - happy to read you like my content <3 Have a good one!

@@_DANZIG_ hahaha, best possible comment! I also think it's a great product. Have a good one!

The description of your problem is not very specific, so it could be caused by several reasons. Empty Battery? No SD card inserted? SD Card full or broken? Defective Camera? Maybe it´s one of those reasons :)

It is! The most advanced field in terms of technology i´ve played on so far :)

@@rummbolt how much is the enterence ticket?

@@AirsoftTipsandReviews It´s 30€ for the ticket. Additionally, you pay 5€ on your first gameday to get the bracelet which enables you to interact with the capture points and the spawn station :)

@@rummbolt not bad price at all for what you're getting. Can you rent equipment from them?

Hi Nik, danke für deinen Kommentar :) Ja, da steckt echt enorm viel Arbeit und Ideenreichtum dahinter. Leider etwas weiter weg, aber das sollte man auf jeden Fall mal erlebt haben als Airsoftspieler :)

Oh cool, freut mich dass ich da zu deiner Entscheidung beitragen konnte :) Hab mir selbst erst Ende letzter Woche ein weiteres bestellt auf Reserve, ich bin echt happy damit weiterhin! Wünsche dir viel Spaß mit dem 4uad Bucking!

@@rummbolt Das hört sich ja schonmal super an, dann bin Ich guter Dinge. Ich hab mir gleich zwei bestellt, eine für mein VAL Projekt, das andere halt für die MTW, Ich hoffe mal die Knifte hält was der Preis und der Hype verspricht :P

@@Parthemonium Am Hopup dürfte es meiner Meinung nach dann auf jeden Fall nicht scheitern ;) Viele Grüße!

@@rummbolt Danke, Danke und dir ebenso! Freu mich schon auf die nächsten Videos!

@@Parthemonium Danke dir auch für die netten Worte. Es sind bereits einige Videos in Planung.

@@TheGutshotpro Yeah, made some good experience that day :)

@@armeiro19airsoft I'm sorry?

@@rummbolt Here in Brazil "show" refers to, very good!!!

@@armeiro19airsoft Oh cool, never heared of this term used that way here in germany. Thank you very much :)

@@undeRWorld-AirsofT no, you can switch between regular recording and short mode in the app :)

@@rummbolt oh that's awesome! Thank you!

@@undeRWorld-AirsofT you're welcome ☺️

Hey, danke dir! Ja das ist eine G&G Firehawk HC, ich hab ein Gate Aster rein gebaut für die Burst-Möglichkeit :) Das Feld gefällt mir von der ganzen Technik echt mega, da steckt viel Arbeit drin. An dem Tag waren ca 12 Leute da - 6 gegen 6 fand ich ideal, sodass man sich auch ein bisschen bewegen konnte ohne sofort beschossen zu werden :) Schönes Wochenende!

@@rummbolt Beste Bedingungen. Das nächste Mal werde ich dort auch mal mit einer 0.5er spielen! Also auf dem Feld war jeder Spieltag ein guter Spieltag :-)

Thanks mate! The "game mode system" and the objectives are thought out well and the technology behind it works amazing. Such a shame it´s so far away from my place :P

You need to give it a certain "hit"/impact (but not too heavy in order not to damage the camera!) Mine was stuck, too, thats why i damaged the insulation. But you can et it out this way :)

@@rummbolt was able to take it off now glad it still works. Thanks a lot!!!

@@koolio_69 Cool! Have fun with your camera and the replacement battery :)

You need to give it a certain "hit"/impact (but not too heavy in order not to damage the camera!) Mine was stuck, too, thats why i damaged the insulation. But you can et it out this way :)

@@AirsoftbyTNTGermany Hi Tom, sehr gerne! Und schönen Dank für die Glückwünsche ☺️ Viele Grüße, Felix

@@Y2ktactical thanks bro - that was my intention, to give honest information and opinion. Have a good one!

@@felix1846 thank you! Its the ZTac Comtac IV. Not very reliable though, lots of external cables to break. I only use it as a lightweight mount for my camera nowadays :)

If i remember correctly, it was a flat one. But not 100% sure. Maybe someone else can help out here :)

@@rummbolt thank you, might just have to test my luck and get the flat ones then, im planning on using the camera for the silo event coming up and i dont know if i'll have time to order the batteries once the camera comes 😅

@@p1xelplayer1 The battery lasts long, you also can use an external usb powerbank to be sure :)

@@rummbolt Is that too charge it or just to power it?

It´s not cheap for sure, but it´s also a quality product. As always in airsoft: You get what you pay for :) Have a good one!

I won´t comment on political aspects here, this channel is all about airsoft, teching and fun. Thanks for understanding :)

Thank you! Yep thats no problem as long as you have the proper tools for this job :)

@@rummbolt well i have iFixit screw driwers thats have small enough hex to unscrew the gear

@@fotografbeznapadu2 keep in mind that even some d-type motor axles have slightly different diameters, so maybe you will also need an additional tool to apply more pressure on the gear :)

Depends on the card size you use. Several hours should be possible even with 64 gb :)

It records right after being switched on - connecting the app is not necessary :)

@@rummbolt Really nice 🙂 Just what we need in airsoft, these guys are genius. Thanks man

@@NinetysixSoldiaz No problem :) I also think they have some great ideas - curious whats coming up next :)

Appearently, this is a problem some other users in the comments have as well. Unfortunately, i do not know a solution for this, I'm sorry 🫤

@@MrMi123456789 have the same problem , and its so loud! I contacted the seller.. maybe we got faulty product

@@atashli found the solution, you need to rollback to the previous version of the helmet cam and you can do it through pc only

@@MrMi123456789 really? Damn boiii thanks alot!

@@atashli ye i contacted runcamand they told me this, audio will be lower but no noise!

For me, it´s acutally fun to optimize the sound of an AEG like this :) But i understand, some people do not like it, so it can be a good option for sure. Have a good one!