Video

What a useless video. Doesn’t show install. Box / unbox?

i did this and now my spreader bogs down, i actaully broke something the gear box. 300 bucks down the drain

I would like to see how to connect the quick connect to the hose. When I attached mine the water was shut off. I couldn’t determine how to open the valve.

Can you please let me know how far apart both the hooks are from each other? Looking to use this with a Craftsman 21 inch gas push mower. Thanks

2” is a big deal OK?!?

Looks like crap

Lines aren't that good

I just bought the hose now I am buying the connectors. they never give enough

What is the full weight of the ego 26in Hedge trimmer

Are you able to back up with any issues?

Their instructions absolutely suck. Be prepared.

Excellent review!

I have the same lawn mover and the same stripper line

Any update?

Awesome video, can you use this to add more length to your hose? I currently have 100 ft flexilla hose and I want to add another 50 ft.

I took a piece of tubing from harbor freight fluid extractor. Flattened it in a vice. Slid over agitator. Put a piece of 5/8 garden hose over that. Fit's snug. No glue and no drilling.

probably because your grass is so healthy, it needs to be beaten down over and over to stripe, lol. Nice stand of turf!

I took the agitator off the spreader and found some cheap tooth brushes cut the heads off and superglued them to the underside of the agitator. Works perfectly. You can cut the bristles to length if needed.

Have the 25" trimmer. Wish they would make a 16" trimmer. Have topiary bushes that require multiple angles and short areas to get to.

if i had a way of posting a picture of the strips my EGO strip kit makes in my zoysia grass.. you would choose the ego strip kit

I have been using this AR2100 striper on my LM2167SP for 2 weeks now. The bad part is that it has already stopped rolling because it got the smallest bit of grass and or dirt at the ends of the roller where it bolts to the roller frame. It is going back to Lowes and I'm reinstalling my Big League roller that has worked perfectly for 2 years

Do we have to install the new flap to make it work? Don't feel like removing the stock flap on the non-SP version.

What about an install video of the Big League roller?

Have you noticed any differences in power between the two models?

Can you link the products you used?

I live in the uk, if i buy that will my garden tap fit into the quick connector? i have a flexzilla 100ft hose

Stripes depend on where the sun light is coming from. They best pop when the sun is behind you.

I wanted see the installation process

How long was the pipes when you attach them?

I made my own out of pipe some metal brackets and sand

Can you link to the product that you purchased for the modification?

Did you get a chance to test this out?

Dragging that extra weight around, wonder how that affects run time with battery?

Interesting. I get great results from my Ego striper. I only do one pass. I have a video on my channel showing my results.

Will it fit other mowers beside an Ego ?

I am so confused with this striper. I followed instructions, everything is correct but my roller fell off only 3 rows in. They should of made it so it locks around the pivot rod.

Ego should have had you write the instructions for this striper. Thank you!

Thank you for the unboxing video of this striping kit. I think if I am to get it I would add a few strips of gaffer taps to the roller to keep it quiet on hard surfaces and to protect the metal at the same time. I checked my Peak Power LM2142SP and think that I maybe able just trim 3/8" off each side of current trailing shield for it to drop right between the striping kit's hooking arms or leave the current one to seat on the frame of the striping kit and install the included trailing shield (double shield!! LOL) without the work of taking both wheels off to remove the original trailing shield even though it would not hurt to do some cleaning, inspection and reapply some lithium grease to the driving gears to get smoother drive.... we will see...

Sure is allot easier to remove and install than all the third party stripping kits. When the mower is in vertical storage position, can the stripping kit be honking in the opposite direction for storage purposes?

Thank you so much for this review. I was just about to pull the trigger now to purchase this stripping kit for my Peak Power LM2142SP running with High Lift blade and on two 10.0Ah batteries from the 2-stage snow blower to get the extra air lift and machine weight and stopped myself cold after seeing the result which is worse than what I am already getting. With two 10.0Ah batteries the mower will have plenty energy to pull this stripping kit with ease on with the self propelled motor ; however, I notice that the LM2100SP I had before and the LM2142DP both have wider guard/flap than the newer models and maybe why the result is quiet good already. I think I will be spending the money on something that is more important and useful like the Multi Head Snow Shovel attachment kit or the two pack 12.0Ah battery kit instead. Thanks for saving me the grief.

My first thought was this is probably worth 15 dollars but then I remembered our insane economy, so a retail value of about $39.95 seems appropriate.

I can't see anything in terms of striping

I mean, where you get it from?

Dude thank you! I would've never figured out that I need to lift the mower haha

Ahhh, ok. Your review covers some things that mine didn't. I was struggling to get it hooked. Your tip about lifting is great!

Where did you get it? And how much did you pay for it I can’t find it anywhere but one place

Just received mine... thanks for the video.

👍🏼

How are things?.you did outstanding ~blinkishmixix. :)