Video

Did you reboot by removing cmos battery? This shouldn't do anything to your windows 10/11, this is just to increase cpu performance

Not sure what happened. I went back and restored the computer to an earlier back up point and it worked fine. So weird.

Just open ryzen master and somewhere it will show you the cores and it will have a star and a circle next to your two best cores

Yes, this works for all 7000 series, just follow my pinned comment before you start

Should be the same just make sure update bios,and leave core clock to 100.00 read my pinned comment

@@Mateo_FPS wdym update bios? like update once a while or?

@cityofeverything check your bios version and then go to manufactures website and see if their is an update for your mobo bios

@@Mateo_FPS what do u mean by "make sure you are only running 2 ddr5 ram sticks and not 4 to achieve high speeds"

@@cityofeverything how many ram sticks are on your pc? 2 or 4?

Did you read my pinned comment?

@@Mateo_FPS yes. Everything is set like the comments. But still won't boot. Always get the orange light on DRAM... It used to work before with the same settings, I followed your video like 5 months ago. I just updated the bios to the lastest 1623, don't know if that's the problem....

​@@Mateo_FPS Ok so what makes my computer work again was to put FLKR back to auto instead of 1/3 of my RAM and power down enable&memory context restore back to auto. (RAM is T-Force Delta 32Gb kit 6800)

@QuentinMatthysBoeckmansYJ just curious what kind of motherboard are you pairing your ram with? Most mobo support up to 6400mhz speed so 6800mhz should be unstable

@@Mateo_FPS Asus Prime X670E Pro WiFi.

Yeah, no problem! Just give me sometime to make the video. If you need oc settings right now let me know I can help you with that real quick, most 7900xtx settings should be the same

@@Mateo_FPS thank you i appriciate the help! I have the vapor-x nitro+ version

@@BenitoArmani that's a nice card 👌

If you have a good aio or a good fan this should not effect you at all, but if you cheaped out on a cpu cooler it will get warmer, nothing that will damage the cpu. Since the cpu will just throttle down if it gets too hot

@@Mateo_FPS i have an kraken elite 240mm

is good?

@Friarello_ yeah you should be fine

czcams.com/video/kqAsNB5xCVI/video.htmlsi=UcF6zlDeJrFUNcqL Follow this video should work on all 7000 series cpus, just make sure you are only using 2 ram sticks

@@Mateo_FPS worked and stable so far, thanks!

Yes, maximize your cpu performance!...just keep your core clock at 100.00 not 103.00

Reset bios re-do everything again, see if that solves the problem

Do you suggest a program that can measure the input lag of controller?

@@dimitriskaragiannis8689 what kind of controller do you use? Some controllers you can oc to 1000 polling rate and that's about the best you can do

​@@Mateo_FPSsony edge

@@dimitriskaragiannis8689 czcams.com/video/7ufKu2pMkw4/video.htmlsi=fdjHGfaFHW1TNcVo Follow this video to oc your controller

You should do all core -30, I have different numbers because I stress tested each core and those are the numbers I got, every cpu will be different when you do per core

Some people have issues when they oc their memory, so disabling memory context restore will help with stability, but if you care about boot times then leave it enabled but if you have issues with memory, disabling this will help out as the pc makes sure it's all good before it boots up

You can leave it to default, no need to use asynchronous theirs not much benefit from using it I stopped using core flex and I use process lasso instead on my 7950x3d

If you never touched the bios before and it wasn't working, it could be anything,sometimes the pc just needs to reset everything to fix a problem

czcams.com/video/kqAsNB5xCVI/video.htmlsi=UHvKDiIAroUS4WRJ Follow this video instead and it's not a stupid question, this is good for all 7000 series cpu, I have 7950x3d, 7950x, 7800x3d, all same settings except the -30 pbo, that is the only thing that varies

What's your pc specs?

@@Mateo_FPS Motherboard: ASUS B650E-F ROG STRIX GAMING WIFI AMD AM5 ATX CPU: AMD Ryzen 9 7950X3D Raphael AM5 4.2GHz 16-Core GPU: Radeon RX 6600 MECH 2X Memory: TeamGroup T-Create Expert 32GB Kit (2 x 16GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit CTCED532G6000HC30DC01 Cooler: ARCTIC Freezer 34 Esports Duo - Tower CPU Fan with BioniX P-Series case Fan in Push-Pull, 120 mm PWM CPU Air Cooler, for Intel and AMD Socket, LGA1700 Compatible Power Supply: be quiet! BN513 Pure Performance Power 12 M 1200W Modular Quiet Performance Power Supply | 80 Plus Gold | ATX 3.0 | for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors | Silent 120mm Fan | BN513i SSD: Crucial T700 2TB Gen5 NVMe M.2 SSD

@@Mateo_FPS Motherboard: ASUS B650E-F ROG STRIX GAMING WIFI AMD AM5 ATX CPU: AMD Ryzen 9 7950X3D Raphael AM5 4.2GHz 16-Core GPU: Radeon RX 6600 MECH 2X Memory: TeamGroup T-Create Expert 32GB Kit (2 x 16GB) DDR5-6000 PC5-48000 CL30 Dual Channel Desktop Memory Kit CTCED532G6000HC30DC01 Cooler: ARCTIC Freezer 34 Esports Duo - Tower CPU Fan with BioniX P-Series case Fan in Push-Pull, 120 mm PWM CPU Air Cooler, for Intel and AMD Socket, LGA1700 Compatible Power Supply: be quiet! BN513 Pure Performance Power 12 M 1200W Modular Quiet Performance Power Supply | 80 Plus Gold | ATX 3.0 | for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors | Silent 120mm Fan | BN513i SSD: Crucial T700 2TB Gen5 NVMe M.2 SSD

What's your pc specs? Did you check out my pinned comment

@@Mateo_FPS 7950 X3d, Asus Crosshair x670E Hero, Corsair Vengeance 6000Mhz 64GB. I reset the bios back to the previous settings and it booted fine. I'll try again with your settings and this time not do the "Optional" settings. I'll keep you posted.

@@AndrewBonn ok 👍

@AndrewBonn 2 ram sticks right?

@@Mateo_FPS Yes, two RAM sticks. CMH64GX5M2B6000Z40

What mobo do you have and how many ram sticks?

@@Mateo_FPS Corsair dominators 2 sticks , what is MOBO ?

@@Mateo_FPS motherboard is Asus x670e - a gaming

@xwiair3426 so I looked up your mobo and it will support up to 6400mhz stable, 7200mhz it's only possible with an intel pc set up not amd, but if your ram sticks have a default profile try it and see if it's stable,but you can use these settings and if your pc doesn't boot up reset bios and try 6400mhz speed

So the limiting factor here is the mobo?

Yes, this is to maximize your cpu so that you can get the most out of your gpu, plz read pinned comment before you start, and I would recommend you try resize bar on and off to see which one gives you the better performance in the game you play

czcams.com/video/kqAsNB5xCVI/video.htmlsi=3RoIexFjebN07GjB Follow this video

Yes, and read my pinned comment before you start

@@Mateo_FPS ok tks

Yes, just keep core clock to 100.00 and read my pinned comment before you try

Are you in per core or all core? If you go to event viewer in windows and see the whea error, if it says cpu or processor you will need to reduce the undervolt, I believe the apid Id/cpu core Is 1/2=0, 3/4=1, 5/6=2...etc Example.. if it says something about processor/ cpu it will also say something about apic id and their will be a number next to it so if it says apic id 8, that means you need to reduce the undervolt in core 3 by 2, I would repeat this until all whea errors are gone, I'm not in front of the computer right now but I'll update me reply with the actual whea error message when I get on my pc

@@Mateo_FPS I reduced the undervolt to 28 and so far no WHEA error on OCCT. Tested some light gaming and seems good so far. By the way, if I disable the Security options from BIOS, I can't login to Windows 11.

Check my pinned comment for trouble shoot, and if you still have issues let me know, what's your pc specs?

@@Mateo_FPS Really appreciate the message! I found a cmos video before I saw your message. 7800x3d

@@Mateo_FPS must have been the cpu clock control

@Mateo_FPS I guess I also didn't read the title fully, I typed in b650 elite ax and this was one of the first videos. Not sure if that would change much.

@Tyler.7 these settings apply to all 7000 series cpus, some settings are going to vary by mobo

Yeah same thing, this works for the 7000 series cpus, just keep in mind that how much UV you can do is going to vary on cpu

@@Mateo_FPS thanks man, help me a lot . thinking about intel or amd plataform... i have in mind a Kit z On 14 i7 intel or Amd B_E Kit with 7900 or 7900x... On same price, what you choose?

@Renansilva-tu2fp you can't go wrong with either amd or intel, if money ain't an issue you can do all intel to get the best but if you are on a budget, get the most out of your money and find deals, I'm all amd and my cpu performs just as good as 10000$ intel pcs, I would go with 7900x, the x versions are always better, Intel - tunning level moderate/hard Amd - tunning level easy/moderate

@@Mateo_FPS in my case in brazil the plataform Z+ i7 14 gen is same for AMD 7900 + B650E. Imm afraid about intel because the overheat... i will buy a 360 liquid cooler but im afraid of high temps, and i see the 7900 and 7900x have tdp of 170w so this is less then any i7 modern breaking 250w easy

@Renansilva-tu2fp just make sure to buy a cpu frame (thermal grizzly) and be generous with the thermal paste, and a good 360mm aio pump and you will be good

Nice!!

Are you familiar with occt? You can lower the undervolt for now to -28 if it crashes again lower to -25, if it crashes again you have to undervolt per core and see which core is the problem

@@Mateo_FPS thanks, will try that 👍🏽

I would leave it somewhere in the middle either lv 4 or lv 5, does your mobo give any details on the LlC? Like a graph or brief description?

@@Mateo_FPS no its only 8 levels i watch ur another video for asus rog strix u setting level 8 im not sure which level better for me best fps n input lag

@sirdawn4325 this setting here its more to stabilize the uv/oc of your ram if you do (all core) if you UV per core theirs no need for this and you can leave at default

U mean pbo per core? im using per core yh

@sirdawn4325 when I say per core I mean , pbo per core but you stress tested each core to know it's max undervolt value

It's not going to do anything, because that option is for cpus with 2 ccds, 7950x3d has "2 chips" cores 0-7 is ccd0 and cores 8-15 ccd1, what the flex profile does its suppose to assign apps fo the chip that's better suited for it, 7800x3d is basically ccd0 cores 0-7

It won't effect performance in terms on fps but it should slightly reduce overall system Latency, the more things you turn off the better, I saw no difference in gaming when boosting the clock and changing the scalar from the auto option

Hi, can i use this setting for the x670e-e gaming wifi ? I have it with the 7950x3d. Thanks for the help

@s4fety545 yes!

I did all changes, my pc crashes, so i undo the the undervolting still crash if i start a game. Can u pls help me out ?

@@s4fety545 pc specs?

X670e-e, 7950x3d, 4090, 32Gb 6000mhz RAM (2 sticks), my PC crash now without doing anything. Loaded default bios setting- still Crashes now. Did i damage some Thing?

what is the number of curve 7?

@@S.KRISHERif I’m not mistaken it should be 30

Leave it at 100.00

@@Mateo_FPS but how did you made it 103😦

@STRELITZIA5202 honestly I don't even know either but with 7900xtx I can do 103 but with 4090 I can do 102

It's in tweaker, ddr5 section watch from 2:53

​@@Mateo_FPShi! Ty for getting abck so quickly! I saw that u enabled expo1, I also did that to get to 5600mhz, my question is what would I have to do if I wanted to get it to, lets say, 5800mhz

@Lowgravity56 the easiest solution and less of a headache would buy better ram, 5600mhz is a oc that's stable anything higher is going to cause instability and system crashes will occur, if you want better ram, you want to look for cl30 or cl32 and speed of 6000-6400mhz oc profile from manufacturer, but you also have to confirm your mobo supports those speeds, 6000mhz is standard for ddr5

@@Mateo_FPS ok I understand! Ty for the answer and the time!

Yes, just leave asynchronous/core clock to 100.00, and you should be good, make sure you are also only using 2 ram sticks to get high speeds

@@Mateo_FPS sweet thank you will do

Is it also fine for the x670e aorus master ?

@@iYouVee yeah, just make sure you leave cpu clock control at 100.00

Yeah, try them out, if it doesn't boot up go back to the original profile, I've done these on cl30 and cl32, just make sure you are only running 2 ram sticks and not 4

@@Mateo_FPS will do, thank ya. appreciate it a lot :p

@@Mateo_FPS a follow up to using the settings with CL40; I'm running a 7800x3d with an x670e MB and I made sure to follow the guide exactly, I enabled the optional settings in advanced as well and I did have to end up clearing my CMOS cause it wouldn't boot, but thank you regardless, it was a bit of a learning experience for me

@@taps9685 czcams.com/video/kqAsNB5xCVI/video.htmlsi=1YsTPVEcS0FMgb4he Follow this video instead

@@Mateo_FPS I wanted to thank you for helping, I got a little sidetracked by other troubleshooting I had to do. But the fix worked wonderfully, I appreciate it a lot!!

Yeah, try them out

Reset bios to default by removing the cmos battery or press the button that resets bios, redo the settings but leave asynchronous mode at 100.00 Pc specs?

@@Mateo_FPS 78003dx, 32gb ram aorus, b650 aorus elite x rev 1.2, aorus waterfirxe ii cooler 240

@GodfreyJMassa is your ram 16gb x 2 or 8gb x 4? I didn't mention this on the video but some people have 4 ram sticks instead of 2 and that has been an issue

@@Mateo_FPS mine is 2 x 16gb ddr5 ram

I doubt that, unless you are water cooling, you are probably core stretching, because I know if you stress test per core, anything above -32 it's a crash

@@Mateo_FPS yes im using water cooling

@@Mateo_FPS but when i test on -50 all core, my PC went crash

@@veltgaming9492 nice! I bet those cpu numbers are crazy!

czcams.com/video/kqAsNB5xCVI/video.htmlsi=1gI10hUKtDnneAHN Folgen Sie stattdessen diesem Video

@@Mateo_FPS Vielen Dank hat Funktioniert :)

The speed? Or actual utilization?

@@Mateo_FPS This is my ram Gigabyte AORUS Memory ARS32G60D5R (DDR5 32GB (2x16GB) 6000MHz) When i was in bios it was defaulted to 4800

so to answer your question idk, i just want to make sure that im using the rams full capability which is 6000mhz.

@AnInsaneZombie idk if you figured it out already but if you open task manager under memory you should see the speed of your ram

Ok thank you

Are you using wifi or ethernet?

If you are using ethernet you should be fine but if you turned wifi off and you use wifi , go back and enable it

I don't use armoury crate I Uninstalled it,I never found a use for it, it was a program running in the background, this will hurt your 1% lows , what do you use armoury crate for?

@@Mateo_FPS I thought as much, I don’t use it for anything, will uninstall, thanks.

@@Mateo_FPS what is the best way to uninstall AC, I have read people have problems getting rid of it.

@@bens5791 uninstall from bios, watch video from 8:35, if it's still their after you do this, download revo Uninstaller and use that to Uninstall

@@Mateo_FPS Neg 30 on all cores, haven’t tried to go any further yet, all stable at this stage. My only concern is my idle temp is now 50-52C, should I be worried about this?