Hello Mateo, I'm really impressed with your work. Your dedication is truly inspiring to many people. I think I have a problem and I would like to share it with you. I have a system with 7800x3d - 7900 xtx - 2x16 6000 cl30 - rog f gaming, and I set this system with the settings you showed. However, I can't overclock the graphics card. It's stable for over an hour in Furmark and other benchmark or stress tests, but whenever I enter Warzone or another game, I get a crash. What could be the reason? Could you please help me? Thank you.
@@Mateo_FPS It has to be 1000% mw3's fault, i played some apex and had no perfomance issues at all and no crashed. I tried uninstalling mw3 and got a blue screen (thats a new one). Maybe it is the way i wired the GPU? I have 3x8-pin and got 2 cables with 2 x8-pin and wired it that way.
@@Mateo_FPS Little update, i stopped playing and just got back from the gym. The game crashed again when i launched it and my settings are not being saved every time i start the game
I know you are playing all AMD, but I have a 13900k and the sapphire 7900xtx. I do have an OC on my GPU and my CPU just has an UV. My ram is OCd to 7000 mts. Why are my 1% lows so much lower than yours? The only way I can get those higher is with rebar off.
I game with re size bar off, and I have my pc optimized so my cpu isn't being used in the background, I don't have intel so I can't comment but I know you should be able to get these numbers as well with the 13900k
@kpm4620 you would be surprised how much crap is running in your background when you install windows and it's a lot of stuff that isn't necessary. You 1% lows are affected by this, I did it to maximize my cpu performance and this will allow my gpu to run at its best, helps me game at 1440p 360hz with my 1% lows at 300fps +
I applied the CPU settings from your "czcams.com/video/kqAsNB5xCVI/video.html&ab_channel=FPSOVERLOADby%3AMateoDaK1LL3R" video. Stress tests were successful. My graphics card is an entry-level 7900xtx hellhound. The settings are as follows: GPU clock: Maximum of 3030 MHz. GPU Memory: 2660 MHz - fast timing or default (both result in crashes, as do 2600 and 2580 in Warzone). Power limit: +10-15 (both result in game crashes). GPU Undervolt: -20 (i reach 1050 mv in stress tests but in game i use 1125-1130 also 1150(def) still crash) Custom fan settings: Slightly boosted to stay below 65 degrees Celsius. I should note that with a 3200 max clock and 2750 fast timing RAM +15 power and -50mv undervolt, I got stable results in benchmarks for 2 hours. The card's average power consumption varied between 420 to 460 watts, and the temperature remained stable just below 70 degrees Celsius. However, I can't maintain these settings in games.
Try these settings Max out power limit Leave the frequency and volt alone Go to vram tuning, and set it to 2714, that's how I'm running my card right now Make sure you do the oc by gaming profiles not global
Hello Mateo, I'm really impressed with your work. Your dedication is truly inspiring to many people. I think I have a problem and I would like to share it with you. I have a system with 7800x3d - 7900 xtx - 2x16 6000 cl30 - rog f gaming, and I set this system with the settings you showed. However, I can't overclock the graphics card. It's stable for over an hour in Furmark and other benchmark or stress tests, but whenever I enter Warzone or another game, I get a crash. What could be the reason? Could you please help me? Thank you.
Do you also have constant crashed with your 7900 xtx? I got the newest drivers and did no OC at all i let it all stock.
Mw3 crashes randomly, I reset my pc completely and I figured it was the game, try oc your 7900xtx
@@Mateo_FPS It has to be 1000% mw3's fault, i played some apex and had no perfomance issues at all and no crashed. I tried uninstalling mw3 and got a blue screen (thats a new one). Maybe it is the way i wired the GPU? I have 3x8-pin and got 2 cables with 2 x8-pin and wired it that way.
I Think i got it fixed (?) I reinstalled the drivers and mw3 and it seems to fixed the issue, playe one game without problems
@@darius1842 hopefully it stays like that, I still get random crashes
@@Mateo_FPS Little update, i stopped playing and just got back from the gym. The game crashed again when i launched it and my settings are not being saved every time i start the game
Update video for season3 with amd settings plz?
Ok, I'll post later or tomorrow
I know you are playing all AMD, but I have a 13900k and the sapphire 7900xtx. I do have an OC on my GPU and my CPU just has an UV. My ram is OCd to 7000 mts. Why are my 1% lows so much lower than yours? The only way I can get those higher is with rebar off.
I game with re size bar off, and I have my pc optimized so my cpu isn't being used in the background, I don't have intel so I can't comment but I know you should be able to get these numbers as well with the 13900k
Awesome. Thanks for the quick response. If you don’t mind another question…what did you do to optimize your PC for no utilization in the background?
@kpm4620 you would be surprised how much crap is running in your background when you install windows and it's a lot of stuff that isn't necessary. You 1% lows are affected by this, I did it to maximize my cpu performance and this will allow my gpu to run at its best, helps me game at 1440p 360hz with my 1% lows at 300fps +
What oc settings did you try?
I applied the CPU settings from your "czcams.com/video/kqAsNB5xCVI/video.html&ab_channel=FPSOVERLOADby%3AMateoDaK1LL3R" video. Stress tests were successful. My graphics card is an entry-level 7900xtx hellhound. The settings are as follows:
GPU clock: Maximum of 3030 MHz.
GPU Memory: 2660 MHz - fast timing or default (both result in crashes, as do 2600 and 2580 in Warzone).
Power limit: +10-15 (both result in game crashes).
GPU Undervolt: -20 (i reach 1050 mv in stress tests but in game i use 1125-1130 also 1150(def) still crash)
Custom fan settings: Slightly boosted to stay below 65 degrees Celsius.
I should note that with a 3200 max clock and 2750 fast timing RAM +15 power and -50mv undervolt, I got stable results in benchmarks for 2 hours. The card's average power consumption varied between 420 to 460 watts, and the temperature remained stable just below 70 degrees Celsius. However, I can't maintain these settings in games.
Try these settings
Max out power limit
Leave the frequency and volt alone
Go to vram tuning, and set it to 2714, that's how I'm running my card right now
Make sure you do the oc by gaming profiles not global
You probably meant to say "2714," okay, I'll try the settings you mentioned.
@@Mateo_FPS
@@LucianGraymark yeah my bad
Did this work for you this is what a have also