Video

Can i use 6s150c with this stack. For racing drone 5 inch

soo good ..

Nice. But I am a adrenaline junkie. I need a 2000-foot antenna tower there so that I can dive from 2400 feet legally without registration (my single rotor heli is 249 grams, with video proof).

Do you know if it was already fixed in blackbox explorer?

GPS rescue would have saved me a lost helicopter 2 years ago during long range and high altitude. At that time, I skipped installing a capacitor to keep my helicopter under 250 grams at that time. And a power spike rendered VTX incapacitated mid air. The VTX sent me a still picture for more than 3 minutes, and I kept it in air for 3 minutes blindfolded. I switched off the motor after 3 minutes to kill the drone because the kinetic energy of a helicopter's rotor was a danger. The altitude was too high to determine where it can drift to in the wind and crash land.

You are always a legend. Thanks for bringing up the issue of GUI showing the non variables. This causes a lot of confusion and you are helping a lot of people including me to understand the situation and not get overwelmed by the ammount of parameters. Thank you again

I am trying to use the 10" tune. Works decently, however my t5 3115 get suuuuuuuuper hot. May I ask what BL32 settings you use? Motor timing etc etc.? Thanks so much if you happen to see this.

I have the same issue, and I use betaflight 4.5

I'm getting flyaways with this preset, any help?

What if the value is 0?

it just happened on this morning unplug and plug in back its work again

Motors won't spin after flashing to inav ESC turns on but just doesn't respond to signals

It is not really clear to me where would you conect the black battery wire to? The ground esc-FC stays the same then what about the battery ground cable? Thanks

Really cool inside stuff! Thank you very much for sharing! I'm still trying to figure out at which number to set up the warnings for my 250mW/250hz controller.

YAW to RIGHT and ARM!!! This is the simple bypass I’ve used and doesn’t require any of this programming. It is cool what u can do with the logic switches tho!!

Arm, disarm switch about 7 or 8 times

So 35? Up if you still have prop wash? What about on a 3d quad?

We never seem to be there at the same time. Unfortunately, I will be working on the 25th and won't be able to attend. One of these days i hope to let you whoop my ass on the track hah. Cannot possibly thank you enough for the massive FRIA you secured. SO much better than I could have ever expected!

I miss the good old days..When we didn't have to get guvmint (sic) approval to fly our toys in parks. I'll be thanking no one and in particular the AMA for falling asleep at the FAA RID meetings because they saw a potential membership cash cow and the FAA for ruining flying spots nation wide for no dam good reason.The "freedom coalition" is nothing of the sort and their "hobbyist" that was supposed to represent actual hobbyists was a commercial photographer with zero clue as to what being a hobbyist is.. The park I flew at where it was free and we always had the interested public stopping by is now empty due to this nonsense and not everyone is a fan of being corralled into a dues collecting club....nope. I find no joy whatsoever in the dismantling of our hobby as we knew it or the invasion of privacy RID foists upon us...

Hi, thank u for everything please i have a 7 inch qav whoop x8, can i use the 8" and 9" cinelifter preset? I use 2807 motors 1300 kv thank u so much

Could you clarify one thing with INAV. If wea re using BMI270 gyro its default frequency is1.6kHz(625us), 3.2kHz(312.5us) or 6.4kHz. Default INAV value for the looptime is 500us(2kHz) and it's not clear how to set correct value in microseconds for 3.2, because its not integer - 312us or 313us or leave 500us and give it up ...

Betaflight pls)

It's great you're creating this INAV content and I'm really enjoying it. This tutorial on the programming functionality in INAV is a perfect example of a very under used feature. For reference though, there is a built in way to achieve the same result. Set nav_extra_arming_safety = allow_bypass in the CLI and then hold full right yaw when you arm.

Excellent! Thanks for the tutorial, Mark! 😃 Stay safe there with your family! 🖖😊

Great content sir. Please add more INAV topic. Btw, I thought we can disable arming safety with put left stick on bottom right and then switch to arm.

Nice!

Awesome video! Quick question, when i try creating the logical switch, in the v1 row, TPWR, and all the Rqly and rx and tx related items are not there, do i have to enable something somewhere?

Awesome news!

Only four and a half hours from my house!

You can buy one of these on the Temu site for six bucks

You Pennsylvanians better vote Trump this November or in for a very bad four years of economic policy. Sorry for the politics, but every time I see Pennsylvania, I get disappointed.

Thanks for your work to make this a FRIA. I’ve been down twice so far, always a good time racing.

But don't you still need a spotter to fly FPV, even in a FRIA? And isn't BVLOS still illegal - even in a FRIA? (Spoiler - in Canada, you can do both of these things freely, almost anywhere, if you fly under 250g.)

Woooo🎉 see ya next Sunday

Great news, Mark! Thanks! 😊 Stay safe there with your family! 🖖😊

Nice Let’s go

That’s great

Yea I’m not asking permission to fly a toy.

Too bad it's so far away but thanks for setting it up !

Thankfully graphic content is blurred out

excellent overview of what it all means. thank you sir!

Is there a way to set RDP (readout protection) option when flashing firmware?

WTF! Blur a quad?

Why a similar approach is not built into the flight controller board i will NEVER understand. Hence the making of my own trusted non weirder predictable flight controller.

Do you have something similar to this for the whoopfly16 by sub250.

Now, In August 2024 SETPOINT or GYRO ?

Hi bro, love from india❤. May you please share knowledge about tuning a inav quad from beginning to end.

I've got this behaviour on Holybro Kakute H7 + Tekko 65A ESC and as a result this stack has died after some flights with smoke and flame. But most dangerous behaviour with INAV I've got recently on Matek H7 FC + Hobbywing 60A ESC - without any reason one motor can start to spin when copter disarmed and sometimes it can be fast and unpredictable - 50 or 100% throttle for one second or less (enough to make harm) and I suppose that problem not in the ESC or FC because every time it's random motor and this issue can be reproduced in 1 to 5 flights - in my opinion its INAV issue.

Outside and upper right? That’s not what you did