Video

Yes check the space engineers workshop on steam

The subgrids are part of the projection itself. Only the projector can keep a projection. When you toggle on keep projection. It should keep the projected subgrids also as they are part of the projection. Remember the subgrid projection and is part of MGP(MultiGridProjection) and not my mod specificly. My OmniBeam only builds them. MGP tells my OmniBeam that it can be welded.

It doesnt. Thats a seperate diffrent block. Its in one of my videos. Its pretty simple i made my mod for multiplayer servers. Cause it would be hard setting a block limit in an all in one block. OmniBeam X-1100 Weld/Grind Modes. And OmniAurora X-2200 is the laser drill.

Yes OmniTools on the steam workshop

@@raidfire85 thank you man

@raidfire85 does it work on survival and is it need to be connected to crates with supplies

@@duomaxwell4340 Yes

@@raidfire85 wonderful thank you for saying so bro i just subbed hoping to see more amazing mods and stuff from you

Instead of being an asswipe and actually asking for help about it. My reply would be it sounds like a skill issue. Learn to use and ask for help in the proper channels. Or move onto something you can actually understand of how to use. Have a good day. And for your information it is not 20 showcase videos its 20 progression videos from the start of tools making to the end. To use with the mods linked script there is an explenation on how to set it up in the script itself. And also on the scripts own workshop description.

First did you add a rotor and hinge to each tool? Did you name things accordingly like in the script if you are using the script. You need to explain step by step of what you did. Like are you using the tools with or without the script linked in the mods description? But these kinda questions are better suited for either the scripts or mods comment section on the workshop 😉

Its on the workshop ;) Dont remember its name. Tho mine is altered tho. But the frame is on the workshop.

OmniTools workshop 😉 Automation printing script for programmable blocks will be out in 1-2 hours. Script author isent home right now.

Nowhere yet its too be released in 1-2 hours. Youl have to search for omnitools on the workshop

@zerenta12 It welds anything it touches across the full Line field(While the animation beam does stop at the first block it hits) It will still weld anything deep inside. Because of the tools 200m range. If its projected/damaged/unwelded it will get welded.

@@raidfire85 ooo I like it when these are out I might try making a spinning laser grid kinda thing that I can just move ships through to repair them provided the server owner lets me have that many

@@zerenta12 You wont need anything spinning with this one tho. Because its a tool turret. So it auto aims like a turret but at projected/damaged or unwelded blocks.

@@raidfire85 oh ye it's primarily just because I think it'd look cool

@aurelienbernard7745 The main diffrence is fully custom unique models doesnt reuse any from the original vanilla welder models and other models. The mod will be called Omni Corp: OmniTools on release. Also mine is alocated towards performance because im customizing them towards multiplayer servers/nexus servers. Also mine will have a script released when the mod releases that is paired with OmniBeams to auto ship printing its an ingame script you put in your programmable block. The OmniBeam X-1100 is a dual mode tool that can both grind and weld. Seperate animation and beams/lasers for each mode on the OmniBeam. The release in 4 days will consist of OmniBeam X-1100 Dual Mode tool(Weld/Grind) OmniAurora X-2200 Drill(Its in the OmniTools your playlist) And i paired a standard oredetector with the drill with its own custom model and its called OmniSpecter Ore Mapper X-1500. One of the videos in the OmniTools playlist will show you all 3 blocks. Currently the Auto Printing script is only paired with the OmniBeam and most likely wont work with any other tool. Since the script was made based on the OmniBeam.

Its because the turret code needs slightly more optimizing. The code it self for ToolCore turret support is only like 2-3 weeks old. So there still alot to do there. Hence my prolonged release date on turret type tools. Its been improved slightly after this tho. But sometimes its not getting the next projected block and will return to position 0. Its just a little more tweaking on the code. But it will get there eventually. So in the while the code is getting improved until approx release date(i might release it earlier we will have to see) But i will prob improve the model and also do more balancing passes on the turret itself. Even tho it semi works im not really comfortable to release anything that doesnt work as good as it should. Releasing it would mostly be an annoyance for the users.

There are others out there allready also. You might or might not like them tho. Just search for laser tools and then check that its toolcore. Tho none of the tools do auto print tho. Not until the script paired with the OmniBeam gets released with it. I cant promise if the script will work with other toolcore tools since it was made arround the OmniBeam as the basis of it.

Here are some questions. Does it repair, or only build? Does it work only with same grid or can projector and ship be on another Grid? Do turrets need conveyor access, or do they pull resources from any storage on grid?

@@fortmanr They need conveyor access. The tools themself can weld or repair anything even if its on a seperate grid but not automaticly you would have to manually aim them. They arent turrets they are fixed tools made as PMT(PlayerMadeTools) Tools on subgrids(Rotor/Hinge setup) in this video. Printing is not automaticly either its handled by a script that uses the rotor and hinge to aim the tool. This setup does not autorepair only autoprint and the projector has to be on the same grid or connected subgrid.

@@raidfire85Do you have any plans to make the script able to repair damaged blocks also? Or is that not do-able

@@n0sc0p3dpwnd9 I dont think thats doable. There are limitations to what ingame scripts can do.

It goes threw blocks also. If it didnt there wouldnt be any point to using them ;)

Your prob the only that is having that diffculty tho. YT is the one encoding it on upload. So its prob something on your side i belive.

Its your side. I don't have this issue

@ltore1 Read video description or black text at the top at the start of the video ;)

@Redbeardedbiker91 On the 10th you can test it all you want. Ive made the specific setting essentially putting it at the lowest speed and workrate(wich might change depending on feedback after that tho) But currently the speed is 1, workrate(x amount of blocks) is 1 but work range. Line(laser) is 180m so it can reach pretty far. Further then any standard welder or grinder. And yes it can both Weld and Grind. Im currently in the process of making the model for when ToolCore fully supports turret tools(This means that no script will essentially be needed) While the current setup will(For automation printing atleast)

@LeDaytonpax yeah no :P . This is far apart from actually making a game :P This a 3d model i made in blender. Its actual functionality lies within the framework called ToolCore made by AshLikeSnow. And then add a scripter into the mix then you get what you are seeing in the video. So there is essentially 3 people making it do what it does in the video. Framework creator -> Modeller/Mod creator -> Ingame scripter. So its not magic :P

@bornkinggamer3347 Its been improved since then and also more optimized: czcams.com/video/K2f_fc83844/video.htmlsi=zYXuU1giqjFr8M3B

@woodoodx Just search of Omni on the space engineers steam workshop after th 10th of april and it should be there. I currently dont have any confirmation on if the automation script will be fully ready tho as its created by a third party(a scripter i contacted) But the mod will be atleast. Its currently in the testing/balancing stage for MP usage. Also eventually the mod pack will get a special turret type of tool when the framework ToolCore supports it fully(Meaning when all the bugs are ruled out)

@Leaf-ps9ds No not really not until the full release the 10th april. Tho currently it hasent worked with any other ToolCore tools ive tested so far. The script was essentially tailored arround the OmniBeam. It might but cant promise anything when it releases. But there is prob going to come more scripts for ToolCore tools in the next few months i would guess.

@@raidfire85 Thank you!

@HaribdaHow Watch this one and also read the title of the video ;) Same tools on a Shipyard in space: czcams.com/video/K2f_fc83844/video.htmlsi=cBwxEA6vVZIlBwEr

Just search for ExpanseParts on the space engineers workshop under the mod section.

@Britt3rh0lz Thats whats intended. But anything can drop sim if you over use it. Like making a gazillion of them. Nothing is MP ready unless you put limits on it.

@@raidfire85 As long as its MP ready we good! As they seem quite effective, dont think they need to be spammed. Wanna use them in a coop/semi-coop scenario anyways

Im making it for Mp Nexus servers so should work fine in coOp also. But if you get sim issues or lag thenyou know you went ham on it 😝. It does require som setup to get what you need tho. Its not plug and play

@@raidfire85 Thats fine I dont mind some config work. Sounds pretty goood

What you mean config work. It doesnt have a config. All settings are defined and cant be changed on the user side. It uses a newish framework called ToolCore.

@cfmcgheell youl see in the title of other videos that the release date is 10th of april

@sarbe6625 Well prob not tho. This is a showcase video. So its showcasing what is possible. An MP server would have to limit them for performance reasons. But even a single one is able to print a whole projection because of its 180m range. So if you senter it beneath the projection youl be able to weld 180m in each direction. The reason i would suggest servers have limits is mostly because subgridding. Physics doesnt behave nice in SE.