Video

It was definitely an amazing board for its time. I did end up selling it a while back. Still kinda miss it… hope you’re enjoying the jaws.

Water board sells carbon extension plates that flex and work really well for adding some suspension feel, especially if combined with some silicone riser pads. Most mountain boards have a proprietary bolt pattern for their trucks though

Thanks. I've ridden some of their newer boards but don't own one. The newer ones do have some awesome features. Even more power and range to name a few. They are heavier though, so a buyer would need to keep that in mind. So much of finding the best board for you is knowing what you're gonna use it for. The newer models are pretty amazing for longer distance rides and great stability at high speeds. I wouldn't really recommend them for short trips to the cover store. The ones I owned were a pretty awesome mix of power, range, stability at speed and not super heavy. But if course the newer models beat it out with higher specs and other cheaper boards are still good and even lighter. Just kinda depends on the use case scenario as to which is the better option.

Sounds like you have a sweet set-up there. Nice👍

Rear trucks are still on backwards though

@@sageoz9886 Where? Link to the spot in the video.

@@scrooner lol sorry I feel that everyone has their rear trucks on backwards. If you are using the surf adapter on the front, you don’t need your trucks cutting wide. By flipping the rears to face with your fronts, you’ll gain huge stability at speed, better cornering and a more surf like feel when carving.

​@@sageoz9886What the frick are you talking about?! Flipping trucks makes no sense whatsoever, regardless of context.

Thanks for the compliment. I'm loving my surf and rail adapter. You guys make an awesome product. Keep up the good work👍

@@yoursource3170 If you are interested in a new technology to experement with, you should really consider the FIN System. We just released it and are taking pre orders!

I'm honestly not super well versed in surf skates. I'm just getting into them. I've never ridden a meraki but I have tried out a c7 that a friend of mine has. From my very brief time on the c7 I would say the waterborne is easier to pump and turn sharply but I did really like the mix of stability and carve on the c7. I think I might enjoy the c7 more than the waterborne if I were cruising longer distance on an analog setup. But I love the waterborne if I'm looking to either stay in a small area and practice sharp and snappy carves or ride an electric board for longer distance. I feel confident the waterborne would stand up to abuse quite well including ollies. Doing ollies would take some getting used to though with the rail adapter and the weight of the surf skate adapter would not make that ideal I would think. It's probably possible though with a bit of practice. Hope that info helps.

I ended up selling it a few years back. Not because I got tired of it, in fact I still genuinely miss that board, but because at the time it the best decision financially. Of all the boards I’ve ridden personally it’s still one of my all time favorites. When I sold it my LaCroix was still in great condition and the last time I checked with the buyer it’s still going strong. Currently I’m riding a BKB duo which I also enjoy. I’ve been meaning to do a proper review of it but haven’t been able to yet.

A.t wheels.... Four of them. stable trucks... lacroix has insane ranges up to 40-60 miles on a charge lmao

nevermind i heard where in the end. thx

The miles sx panther pro has a 40mile range, belt driven and 30mph top speed and the double kingpins the evolve has and its full carbon fiber for $1,350

which one wheel?

@@fsflip3111 We had the originals and now we have the XRs. I have tried the pint and I don't see the appeal of it. The XR goes 18 miles on a charge and is really powerful. I put the flight fins on a bolt on fender and I feel super secure flying off of curbs and hopping over little holes and stuff. Great board.

@@fsflip3111 I just got a "summrrboard" which is the funnest thing ever but it's less practical for running errands and commuting than the XR

@@donnyh3497 would you take that over a solid eskateboard or the xr?

@@fsflip3111 If I could only have 1 board I would grudgingly take the XR because even though it's not as fun as a summrrboard (nothing could be), it's loads of fun and it's really practical to jump on and run the the hardware store or to get a few groceries or a haircut or something. It is really casual for flying around at over 15mph and even going offroad and stuff. Luckily I can have as many electric boards as I want because there is absolutely nothing as fun as my summrrboard! But it takes a lot of hours of practice to get good on a summrrboard. As for a solid longboard....I can't imagine why anyone would want one.....but that's just me

You mean my green jacket? It's actually an old 686 brand snowboarding jacket if mine. I have a mesh armored jacket beneath it.

Thank you! Probably impossible to find then :( Great video too!

???

@@yoursource3170 You sound EXACTLY like Jon Hein! He works on the Howard Stern show.

Hahaha that's funny. I didn't know who that was but I'll have listen to his voice now.

@@yoursource3170 czcams.com/video/UO0i3L7u58E/video.html Check it out, it's uncanny really

Sorry I wasn't able to get around to it and I've sold this board since then. It was great but I can't afford to keep so many boards so I try to buy and sell some to allow me to try different ones out for a while. At this point I believe there are quite a few videos out there with newer versions of kaly boards. Thanks.

@@yoursource3170 what was the difference in power from your lacroix?How did it turn compareded to it aswell?

@@bobbyz3288 There are different versions of the kaly of course and also different versions of lacroix as well. But between the kaly I had and the lacroix I had the lacroix had more power and I also really loved carving on that board. It was honestly one of the most comfortable boards I personally have ever ridden. They don't make the prototipo model anymore but you might be able to find one used. Both boards are great though, I just happen to prefer the lacroix. Just my opinion.

I'm right around 250 miles on 3rd month. I agree, if they upgrade the speed, power, range, suspension, that's an instant buy. I'm gonna get a long board soon to try it out.

Esk8's pushed 40mph over two years ago. onewheel could push 35 if they wanted. a carbon fiber super esk8 that goes over 35 mph and has a 35mile range costs less then a machined metal single motor onewheel and its sad i feel like its a rip off and greedy despite a cool product

@@liammeigs4815 not sure how you’d fit another motor in a onewheel 😂 but I get what you’re saying. That said I skipped the next gen onewheel and got a motorcycle instead 😂🤘🏽

It's the TSG Pass helmet. Pretty popular in the eskate scene. Nice looking helmet. I really like it but it's a bit pricey and does not offer the same protection as a full on motorcycle helmet but it's still pretty good on safety and I like the lower profile. I forget it's actual safety rating but you can look it up online. Hope that helps.

Happy I could help.

Thanks so much. Glad you enjoyed it.

It's the TSG Pass helmet. Price can vary depending on model and retailer. It's a bit expensive but I do like the helmet.