Video

Well done.

I just used regular plug and play 25k lumins LED H11 bulbs for mine.

To the fool who says you buy a new relay...can't do that on a harley..why tell people something you don't know about?????

Thank you so much sir👏🏼🥸

Looks like they went out of business, the website is gone.

Very detailed, BUT you don't show the most important thing - before and after night time views of the road so we can see the difference.

Get to it..

This is the exact video i needed. You explained this to a T perfectly. Now I can confidently install the resistor and finally get rid of that annoying hyper flash. Thank you kind sir!

Metal to metal and add thermal paste so it can dissipate heat

you are long-winded

Is there a way to turn my led side markers into turn signals???

Great video but All ya had to do is pull on the bottom of the grill and it would have popped right off. Making it easier to get to the two lower bolts

What is the size of the fog light LED ?

These work, but the much better, cheaper and safer way to fix this situation is to just buy a new Turn Signal Relay that is rated for LED bulbs. Literally, that's it. You don't have to buy a resistor for every bulb, and install all of them, just pull out the old relay and plug in the new one. I drive a 1992 Toyota Pickup and replaced every single light to an LED, and had to either buy a bunch of these things, or just one LED relay.

Really nice thorough video, thx vm !

Omg, I needed help figuring out how to change my bulb that blew. The first 3mins saved me! Very detailed. Thank You!!

🌹🌹

the product looks good, but I tried finding your website and it looks very sketch. are you still in business? URL says it's not secure, and the home page looks very simple with nothing but three links on it, none for HID lighting.

I wanted to purchase for my 2012 Camry hut site is no longer available. Can I find this on Amazon or something?

I want to thank you for this video as i’ve spent 30 min figuring out why my fogs is not working after replacing bulb and checking fuse box and wiring but this video reminded me to check polarity of the bulb, it works 😂

How did you made the DRLS Walk or chase each other?

Does the 2017 Camry use different LEDs for low and high beams? will these be error free?

Free Tibet. Free Hong Kong. Recognize Taiwan. Thanks for the content. Keep up the good work. בס'ד

is it ok to keep led lights hyper flashing…??

does this get rid of the black line that projects in dim?

*how to make a light install more complicated than it is

I had the other style and the resistor got so hot I'm going back to stock Bulbs for 2007 Dodge Ram 1500

Well done

You don’t have to pull it all off actually. Just follow instructions till 3:00 and you should be able to reach under it. It’s a little cramped but it works. I recommend this for everybody. Sound is splendid afterwards. Can’t believe I drove for almost 12 months with active sound

Im guessing... I can use T-Taps also

Hi, I have installed HID on my Lexus CT200h. When I start the engine, (with the option "automatic headlights") the left side turns on, but the right side doesn't. I need to turn off and to turn on the headlights manually and in this case the 2 sides start successfully. Any idea? My ballasts are without Canbus. Thanks a lot..

Just bought a 18 optima and can’t find custom headlights anywhere

If you cut the wheels all the way to one side, turn to right for left side and fully left for the right side it will afford you a bit more wiggle room to get in there….

Your a live saver man thank you! I went and picked up a multimeter and the resisters tonight to fix the issue on my jeep. I had known putting LED in where halgonens were stock it would trick the car but I didn’t know I needed a resistor. Anyway, thank you!

If lead bulb dies would i get an error to know it?

I have the same setup with the harness but after awhile they would shut off and turn back on, other times they’ll just shut off and won’t turn on unless I start up the car again, I’ve tried everything, using different ballasts and decoders and still have the same problem, my car is a 2015 Dodge Charger Pursuit, don’t know if that makes a difference.

Your pretty warm is over 400 degrees. I checked last night. So don't have the resistor touching anything.

Quand je mets les résistances dans les phares, est-ce que la température du moteur les affecte ?

So, several things about this video that need addressing. First, the LED you installed has a very poor design and construction. Plastic base. Horrendous heat dissipation. It should aluminum. Cheap, poor design. Second, proper placement of the LED in the socket assures a correct beam pattern. You just put it in there without placing it the right way. The beam pattern is most likely wrong. Lastly, you don't need a resistor cable, Kias are not that sensitive and it won't give you a fault. I can't emphasize enough that unless you position the bulb properly, especially on a projector lens, the beam pattern won't be right and the illumination will be distorted. Aside from that, that LED bulb looks like it came out of a Cracker Jack box. Get a professional lighting expert to properly do an LED upgrade/retrofit.

These are only for turn signals? What about daytime lights and built in demon eyes?

FYI I feel if you only intend to replace one bulb or maybe 2 on the same side, going in through the wheel well is the better approach. But, if you intend to replace bulbs on both sides and multiple bulbs, I recommend considering the procedure recommended in the Altima mechanic's manual... Which is to remove the front bumper which allows you to then unbolt and remove the headlight assemblies. Note that Nissan construction of the front part of the car is very flimsy, so if you do this you may find that due to previous collisions that reassembling might be an adventure if a lot of panel attachments have been deformed and might need some pulling and pushing back into position. In any case on my 2015 Altima, I only needed to remove 4 bolts on top and a couple of fasteners in the wheel wells to pull my bumper forward without removing the bolts that secure the bottom of the bumper. With the top of the bumper pulled forward, I had enough room to undo the bolts holding the headlight assemblies and pull them out and once that was possible all the lightbulbs are easy to access... High, low and foglight. For anyone who is changing their low beam headlights because they're dim though, don't do anything until you read the comment I posted about the Suarez vs Nissan Northamerica class action lawsuit that was settled in 2021. Although the settlement in this case outrageously won't fix the factory defect after Oct 2022, you should know about this and maybe report this to NHTSA so that maybe a proper recall would be issued. If you can't find my post immediately for this video about this, maybe scroll all or most of the comments and do a search for my name and maybe "like" the comment so that others might have an easier time finding the comment which is very important for anyone with dim headlights and owns a Nissan Altima.

As long as you get a high quality LED you shouldn’t have any issues with them overheating for anyone wondering

How long Does it typically take to do the install.?

An amazingly informative demo. Thanks so much

Graaaacias!!!!

My fog light is out in my 2016 nissan altima. Put a new one in and still isn't working. Smh.

How many k are the bulbs used in this video

That’s not a 2015. I have a 2015 and that’s not the correct grill

Thank you. Awesome explanation of the proper method to wire these units.

🐕