Hey is there anyway I can get a hold of this light. The website says that they're all sold out. But there is one available, but didn't know if it was producing the matching color with my current HID
Hey so I tried installing mine but they won't come on , everything is plugged in correctly and the bulbs are just fine, any reason why they done come on ?
If you have a 7th gen maxima and have factory fog lights,the fog light control is on the turn signal dimmer switch then inside ring turns to activate em at least on my 7th gen.....hope this helps
@@kylosolo8815 thanks yo. Mine didnt come with factory so i ended up ordering the kit with the switch and installed. I put the switch in the space by the key slot that pops out. I believe it is intended for universal switch
@@dallas218 first off "how about dem cowboys" hope we do better next season.....second what kit did you go with,I'm looking to buy now and do really know which way I want to go
@@kylosolo8815 hell yea G i hope so too. I think we have a chance but it depends on how well dak does when he comes back. Our whole team needs to step it up hopefully we will draft some good defensive players that’ll help.. and im not too sure i went on Amazon and ordered the kit that came with the fog lights as well as the switch and the wiring. Cost about $50 or $60 which was alot cheaper than going through Nissan. Then i ordered some led fog bulbs and they work good.
@@dallas218 kool brah thanks and yeah you're right on that the whole team needs to step up and with the draft picks we should be ready..and dak will be out for revenge lol...thanks again man
unfortunately he does not do the passenger side .. its more difficult because the windshield washer fluid reservoir is in the way of the light so u actually can not reach as easily as the driver side , hence the reason the passenger side is not demonstrated!
Much easier if you follow shop instructions on those fog lights, bending that plastic not a good idea. The engine shield drops down with removing 4 pop outs and 2 screws, you don't need to remove the shield. very easy access to the fog lights without having to fight with the tires.
Great video. Clear directions. Thank you !
Does the box get hot while the lights are on?
On the website there is a kit and the is tge bubs , the bulbs coast more, but which one do i nead, the $81 kit or the $90 bulbs
Hey is there anyway I can get a hold of this light. The website says that they're all sold out. But there is one available, but didn't know if it was producing the matching color with my current HID
Can u show us what it looks like on a wall? Or at night what range?
How hard would it be to install lights BESIDE the fog lights....I want to put led lights in that space.. Any suggestions
Will this work the same for the 2016?
Thanks
When I first did mine I put my car on my ramps and got under it like you said at the end....to me it was easier
great
if i had never had fog light n my car, i have 2014 nissan maxima what kind of fog light i need?
I was wondering the same thing.
Go on Nissan website and go to accessories. They’ll have the OEM fog light
My fog light leda are 7200 lumens....3600 per
If i have never had a fog light in my 2014 how would i go about installing them? Are the wites there when you take out the plastic panel?
Chronic_Slayer if you get the OEM ones from Nissans website in the accessories page it’s literally a plug and play.
You can get em oll the fog lights kit from Ebay you get everything I got mine done ..you get better lights on The front
I was wondering the same on my 13 it’s just caps and I found them on eBay just don’t know if the connector is there
I bought mine used at 33k miles... didn't have them on there and my left low beam went out...replaced it and it still won't come on
Maybe its a fuse
dope rims, are those stock?
Yes
You can just raise the car, idk i just think it’s easier
Title says 2007-2014, caption on the video says 2008-2014. Which is it?
It's not for 2007.
Both are incorrect.. it’s 2009-14.
Hey so I tried installing mine but they won't come on , everything is plugged in correctly and the bulbs are just fine, any reason why they done come on ?
Jose Santana
Try flipping the factory connector that plugs into the bulbs around 180 degrees to reverse the electrical polariry.
Operator error
what type of headlight bulbs are you using and where can i get them
So I’m having trouble. My car did not come with a factory fog light switch. Did u have to run your own switch or did you car already have them
If you have a 7th gen maxima and have factory fog lights,the fog light control is on the turn signal dimmer switch then inside ring turns to activate em at least on my 7th gen.....hope this helps
@@kylosolo8815 thanks yo. Mine didnt come with factory so i ended up ordering the kit with the switch and installed. I put the switch in the space by the key slot that pops out. I believe it is intended for universal switch
@@dallas218 first off "how about dem cowboys" hope we do better next season.....second what kit did you go with,I'm looking to buy now and do really know which way I want to go
@@kylosolo8815 hell yea G i hope so too. I think we have a chance but it depends on how well dak does when he comes back. Our whole team needs to step it up hopefully we will draft some good defensive players that’ll help.. and im not too sure i went on Amazon and ordered the kit that came with the fog lights as well as the switch and the wiring. Cost about $50 or $60 which was alot cheaper than going through Nissan. Then i ordered some led fog bulbs and they work good.
@@dallas218 kool brah thanks and yeah you're right on that the whole team needs to step up and with the draft picks we should be ready..and dak will be out for revenge lol...thanks again man
unfortunately he does not do the passenger side .. its more difficult because the windshield washer fluid reservoir is in the way of the light so u actually can not reach as easily as the driver side , hence the reason the passenger side is not demonstrated!
Just take the front bumper off, way easy to do
Much easier if you follow shop instructions on those fog lights, bending that plastic not a good idea. The engine shield drops down with removing 4 pop outs and 2 screws, you don't need to remove the shield. very easy access to the fog lights without having to fight with the tires.
do you mean the plastic shield under the car? do you need a lift to do it that way?
How much is that?
The car or the lights lol?
The lights
Lol I’m not sure how to answer this question without being a smart ass 😂 depends on which brand I guess 🤦🏻♂️
hola k partes de carro se acoplan al nissan maxima 07 tengo mi carro chocado de en frente y nececito repararlo
la catrachita Dominguez depende de que fue lo que se daño?
What type of led is it 10000k?
LEDs dont have Ks lol.
Lmao yes they do 🤦🏻♂️