Video

That's Super Pochaco, she's from anime, very expensive figure at this time. solarisjapan.com/products/super-pochaco-1-6-rennyuu-satsueikai-vertex?oid=124066&qid=21cfe5d0bb557759f789ace827ba3425#

@@AlvarezAzel Okay Thanks. I figured probably rare or expensive. I like your repainted custom Mercury Cougar you did 👍🏻

@ShawnStafford-1978 much appreciated 🙏

@@AlvarezAzel Hey not a problem. I like your customized vehicle's and do the same thing too. 👍🏻

Phantasy Star Universe Clementine, it's 100% free, you can download it from here if interested. psu-clementine.net/wiki/index.php/Getting_Started_with_Clementine

@@AlvarezAzel Okay. I haven't gamed forever. I do everything on my phone that's always running out of memory & storage space. Thank's for the information about the game 👍🏻

The tampos on this car are great, I especially like the matte black version with the teeth.

@@AlvarezAzel Never seen the black version with the teeth. It is a cool looking casting design

@ShawnStafford-1978 must be a few years old by now but the casting was pretty common to find.

@@AlvarezAzel I'm sure mine is a few years old now. I also have a similar looking cammo 68 Nova with the same teeth tempos.

Hey, Assuming your 180+ a lot of your damage will come from investing AP earned into GAS (3rd floor, security dept) Aside from this ensure you have your main techs levelled to 41+. Masterforce main damage after GAS upgrades comes from GI and Nos techs, these will be your bread and butter. Your equipment, make sure it's grinded 10/10, head unit something like bunny ears at least. Hope this helps! if you ever see me in game say Hi, i'll always be happy to give some more pointers or tag along :)

@@AlvarezAzel I'm not good enough to do a lot of this, but the GAS might be possible. Does feeding my partner machine do anything for me? I found out I could feed it.

@beanmchocolate3900 hey there's no rush, once you start running S4/ultimates the item drops really improve so you can gear up pretty quickly from that. Honestly I wouldn't invest in feeding your partner machine for now. It's mostly reserved for crafting gear but it's kind of redundant in clementine as most of the best gear drops in missions or has a 100% crafting rate regardless of partner machine level. Also you cannot invite them into missions like old PSU where they would fight alongside you as an AI helper.

Hey Jim! Having fun indeed! I've always had an obsession with videogames and always find peace within them. In the past couple of years though mountain biking has really won me over! Hope you are doing well, I still watch your videos from time to time though I'm just a silent lurker now 😊

@@AlvarezAzel That's fantastic Keke! I'm sure mountain biking is a LOT healthier for you too than sitting at a bench stressing over a tiny car lol Now that I'm retired, I'm trying to find healthy things to do...and I really should give riding a bike some serious thought. The weather here is perfect for it (but the neighborhood isn't lol)

@@JimSilva-SilvaDiecastCustoms I've been loving getting out there a riding the bike! even got the wife and son to join me a few times on the trails too. Too right about trying to stay healthy, it was all in the head for me, was becoming too easy to spend days sat there doing nothing in front of a screen and eating junk. Something had to give eventually. I do miss the toy cars and the channel, maybe one day when i'm in a better place I would return to it. I'm glad you are doing well though and still going at it! :D

Hey! I'm doing great, hope you are well too. Do you still stream on twitch?

@@AlvarezAzel i'm doing alright <3 i do stream rarely still but it's on a new channel since i came out as trans; MajoraFlutters

I put mine in a sealed glass jar. Spray it with Aircraft Stripper. Most of the paint falls off. I hear you

Rumour has it ep45 is 30% done 🤫

@@AlvarezAzel yay only 2 more years 🙂

@@TheForkzman Haha let's hope not, I had a few real life issues to overcome and in the mean time I ended up investing more time into RC cars and mountain biking to encourage me to get out more. Things have improved and I have began taking an interest in diecast cars again :)

Thanks Rob :)

Thank you for the support Vincent, much appreciated :)

I drilled a hole using a 1mm bit and then glued 1mm brass tube into the holes 👍

@@AlvarezAzel Ok thanks, what kind of tube exactly did you use? In the meantime, I found some cable end sleeves in several sizes in my tools and bits collection... the small diameter ones make for good, short MG barrels and the wider diameter ones will make for some awesome exhaust piping.

@@colonelburton8451 From what I can recall, I purchased a pack of 1.0mm brass tubing from my local Model Shop, The brand was Albion Alloys and it came in a plastic tube with 5 lengths of brass inside. You can probably pick them up easily on eBay. I like using brass as its easy to cut and shape with basic hand tools. Cable end sleeves would be great too, I have also seen some people use the tip of a biro pen with the ink tube removed as an exhaust, however they do look a little overscale for 1:64th.

@@AlvarezAzel I assume they would be. I tried making a minigun out of cotton buds and it was ridiculous, even oversized for an A10 Warthog's Avenger cannon. I noted that the small sleeves I have left over are really well scaled for a 5-9mm MG, however the piping is very short, and clipping it would warp the material so it's only good for concealed weapons such as in your video but I think it will work great.

Indeed. I own 3 now one is getting converted into a baja truck, there's so many options for them.

Gorilla super glue gel.

Thanks for info

Thanks 😊 Absolutely! They will fit any current enduro chassis. Intact they will fit the trailrunner better as it has a shorter wheel base. The rear wheels will sit more central in the rear wells where as with the knightrunner they sit a little further back in the rear wells. They come in clear uncut polycarbonate. I spray painted both sides of them after removing the protective film.

@@AlvarezAzel thank you so much!

Still running the stock trans in both of them. Haven't had any issues with them so far. However if they ever break I will replace with the machined replacements.

@@AlvarezAzel awsome thankyou man i just orderd the knight runner and have a fusion to put into it but wasnt sure if i should wait to install fusion till i could get the upgrade gearsbut seeing the way yours handles and hearing its stock n holding up well i think ill install the fusion b4 i even drive it lol

@@timmerz8569 Nice! A fusion will go great in this truck. I have had no issues with the Axe system in mine. It runs really smoothly and it's done about 10 hours of trail and rock crawling time in it. The main upgrades I'd recommend is a faster stronger servo (ecoboost from banggood in mine) and some front and rear brass axle weights. I have also since converted the front IFS into a solid axle but that's by choice as I wanted more performance in rock crawling.

On the knightrunner. That's simply just automotive vinyl wrap cut to shape and applied using a hairdryer.

@@AlvarezAzel nice! Good idea. Thanks man!

@@AlvarezAzel you seem to know what you are doing so I have a question I can't seem to find the answer to. If I put a Hobbywing 1080 ESC on mine will I be okay to go in some water? And will it work fine with just the HW 1080 or are other parts needed? Kinda new to the hobby lol 😆

@@hawkeyes3199 Hey. Yeah you would be fine for going through water with a 1080 fitted. The esc is pretty much a plug and play too. However depending on which battery connectors you use you may have to solder on some other ones. The 1080 also comes packed with a program card so you can fine tune how it handles. I set it up for fwd/rev without brake. Drag brake set to 80%. Rev speed 25%. Works like a treat on the stock reedy motor. Lasted around 1hr30m on a 3300mah 2s lipo the other day too.

@@AlvarezAzel awesome! Thanks a bunch for the info!! Glad I found your channel, great vids for sure 🙌