Video

Good Video Sir, That’s different to the way I modded my Samsung PC Drive which I pulled from an old Non-Working Dell SFF PC, I just removed a resistor although I have no idea where it went, It’s certainly no longer on or in the Drive, I moved one solder blob and removed another solder blob & installed a jumper wire, I believe it’s working although I have no disks to check it with but it’s making all the right noises, Anthony - Birmingham/UK 🇬🇧

yap yap yap yap, get to the point ffs

i did this in 2010 as a jock and i had to use moms tweesers to remove it. many years later in 2019 i also found a peace of paper in the drive too also from 2010

THANK YOU. I'm working on a Denon DRR-730 right now with exactly this problem. Will a bit of lubrication get that solenoid working again? I should be so lucky.

Danke dir! Habe dein Video als Grundlage für die Reparatur eines Denon DRM 400 benutzen können. Gleiche Problemlösung bei leicht anderer Hardware. Hat super funktioniert.

Thanks for your work on this video. I've had an old DRM-600 in a box in my garage for around 15 years or so. I found some old cassettes the other day and wanted to hear what was on them, so I dug out the player only to find the same problem as you describe. I added a drop of oil (without removing the mechanism) and all is good! You've saved me a lot of time and trouble - Thanks from Sydney Australia :-)

Even though it's already 8 years later, i had to do this a bit differently. At least what the adjustment wheel goes. I couldn't glue it, since the rubber ring was completely pulverized. So i just took 2 o-rings (approx. 4.8x1.9mm each) and pushed them onto the original indentation of the original rubber. A truly easy fix without any cutting and/or adjusting of the mechanism. It's nice and grippy again.

Answer infinity???

Seems like it's never too late to make this mistake! 🙃 but this solution worked for me 😃Thank you! TIP for extraction: leave enough card(board) above the cut-out to keep stiffness; this helps if your SD card puts up some resistance. For future prevention, I am considering putting some tape on the lower part of the CD/DVD slot as I rarely use it these days

How does this not have more views

Bin ja kein Mathematiker, aber mal so sprachlogisch an die Sache rangegangen: Ist 1 geteilt durch 0 nicht einfach 1?? Man teilt ja quasi 1 durch nichts. Hmmm

just out of curiosity, do you listen to chiptune music by chance? If you do can you please suggest some chiptune for me since i am a big fan too. I mostly listen to dubmood, but let me know if there's any else cool artist!

Mine is the DP-66 1969 model but the dial doesn’t work but it reads radiation still I’m a bit annoyed about that…

Thank you for the video and troubleshooting. Found a DRM-400 at Value Village for $6.99 and the sticky solenoid was the only problem with the deck.

YT profile name: HardDiskLover and also: ''proceeds to install a SSD'' wat

Hallo hier Jens hast du dein CZcams Namen geändert

This is not one of the first Amigas. The motherboard is clearly rev.6a you can see that by the 4 memory chips. The old first Amigas rev.3 had 16 memory chips. Also here you have ECS fat Agnus 8372A which supports up to 1MB chipram and that was implemented from rev.6a. So anyways you've got one of the later Amigas (90-91) with the keyboard from ' 87

I dont have contact cleaner can I use isopropyl alcohol I have some 99%

Can you say who you purchased the caps from ive just won this model from a seller on ebay and I want to restore it, its not arrived yet so have no idea if I needs caps yet, it does need a belt as the seller says it does not play tape but makes motor noise so I hope its only the belts and maybe caps

Some more info on how to open it up would be handy!!.... .I don't see the point of rubbing all over the metalwork with a cotton bud....It really don't matter if the previous owner was a tobacco , cannibus or anybus smoker, or none of the above....Spraying some CRC into any noisy pots would be a more useful procedure ??, I would think......Then show us about the other stuff mentioned!

Could you tell me what is the difference between the GM328 and GM328A versions?

Vielen Dank für den Hinweis, mein Exemplar hatte gar kein compound !

Do you have the service manual?

La keyboard e' rara,la motherboard no,e' la più diffusa sull'A500.per avere una motherboard rara A500,ci vuole una rev.3 o una rev.7,per non parlare della rev.4

Danke für die Mühe.

I don't know why but mine always turns off as soon as I don't hold down the potentiometer

Capacitors may have leaked because the polarity for the connector is negative on the center, which is reverse of almost everything else using those connectors. I just found one cleaning out an old drawer. AM/FM works but the belt is probably broken.

Hi i have the same capacitor on mine thats "smashed" very odd but mine was undisturbed as the warranty seals were intact ... odd

I have a denon DM-R2. Has this problem. The reel on the right does not spin at a constan speed, as a result many of my tapes has been eaten. I have been trying all recommendations on YT with no luck. Also this model is super hard to dismantle😪😪. What would you do? Thank you for ur words!!

Nice video! I wonder if the sony wm-af62 is similar to this one, I just got one but it only makes noises and no movement though the radio works.

I remember buying one of those when I was a kid and it was expensive. Lots of pushed mowed lawns.

Du hast die Restauration aufgrund des defekten Zeilentrafos abgebrochen?

M5521 is referring to the whole family of slot-loaders, so that won't tell you the specific model.

Kann man irgendwie Kontakt zu dir herstellen? Liebe Grüße

Ure still repairing vintage Things.?

Dankeschön

This COULD have been an interesting video but your cam movements were WAAAAAAAY to fast and jerking around all over the place. Sorry mate but I just gave up after a couple of minutes as my head was spinning. It was unwatchable.

wtf is that dirty crap ....

what's the name of the record?

44:22 yo need to pour that tobasco in to make that thing work :-D

очень интересно!

didn't see any smoke coming out... :-)

Nice Video

🙏🙏🙏🙏 thank you!

Die Sternideckel herrlich :D

Thanks! Mine has the same problem!

Interesting. i remember like 25years ago when i modified just connection of PC floppy drive to my amiga 2000. I have checked all pins on amiga nad pc drive and managed that i need to invert signal sending "disk inside" info, then i have added simple logic chip betveen pc drive and amiga and as i remeber it worked for me like charm. I do not remember any changes needed directly on drive.

Maybe it's a good idea to use a resistor between the cpacitor and the motherboard, because when the capacitor is empty and you turn on the Amiga the inrush current will be extremely high to charge it. It's basically a short for a moment.