Video

Sure let me know when it’s posted.

it will be interesting to see what that thing looks like next oil change.

@@TSWGarage614so I decided to change my oil early. Liqui Moly and I already use K&P Engineering lifetime oil filter.

@poppysadventures2020 I need to look into the lifetime oil filter deal. I think I seen that somewhere.

They are not bad. Sometimes I wish I had pegs though. I’d buy them again.

Yikes,I don't think those are meant to run that type of stuff. I mean I tried to run a sawzall which got me make this video :) I guess I am not the one to judge, lol.

That is great. I am glad this helped you out. I always think I make crappy videos!! Thank you very much!!!!!!

no it was perfect others literally Fast Forward right past all the parts .. i'm just getting into knife making as a hobby so i'm struggling

Awesome, knife making would be a great hobby. I subscribed to your channel just in case you start to make some videos on that.

this is a dumb question this saw ( hercules port band) what speed do you use to cut knife blanks?

Oh I don't know. I would probably just let her rip and see what happened!! But I just do things and don't think much :) I would really be interested in seeing your progression, from beginner to awesome.

That's awesome!! I'm glad it helped!!

I know the owner pulled the carburetor and put a different needle in it. Then had to mess with the air/fuel mixture.

I don’t know how many miles it had or if I did I forget. Sorry about that.

Also you’re welcome!!!!

So I think all of these adaptors have their issues. For instance the first real long run with this it disconnected and I had to turn the bike off and on again. I have a ottocast (so I could run Android) and half the time it does not connect the first go, I have to shutdown my bike and restart. Now to answer your question, I like having it wireless. My Iphone, if it gets wet or detects moisture it disables the charging port. I hope this solves the issue. Everything works the same once setup though. Stock works though so it is a personal preference.

You’re welcome!!!

Pretty good. I think I need a new battery though.

@@TSWGarage614 Hopefully you have a good amount of terminal cables, mine are extremely short, and the battery bay is so tight, it's hard to swap them without getting aggravated . I actually use blue Locktight on the bolts. If you're ever looking for a cheap trickle/jumper, the 30A DeWalt works amazing. When I picked mine up it was $180, they are only $100 nowadays. Just a side note.

Yeah, I’m not looking forward to changing that battery. The cables on mine are very short also. Not sure why they made It that way.

I thought it was fun trying to get it working on something it was not meant for. It was not too horrible to do in general though. Thanks @poppysadventures2020!!

lol ikr. That’s a killer for sure.

You’re welcome!!!

No, it is for people that don’t wear a helmet and want to do CarPlay. If you have an android phone you need to get something like ottocast or something like that.

I have an ottocast if you want me to put a video out on it.

@TSWGarage614 That would be great thank you 😎 👊

It’s not too bad really. Just take your time. But I’m glad this helped.

The set screws go on the bottom outside of the support brackets.

You are welcome!!!!

When I bought mine it came with it. Not sure what they do now.

I’m doing another oil change today so if I have issues there are a few things to try for sure. Thanks!!!!

I don’t remember I’ll find out. Don’t have access to the bike anymore.

You’re welcome!! Yeah I’d say that’s normal.

You're welcome! Glad it helped @MarvinMott

I normally turn mine off when I get off the bike and turn it back on when I want to use it. I never had CarPlay disconnect though.

Or no more wire from phone to bike?

Unless you have a wireless CarPlay adapter you have to have your phone attached to the USB in the cubby. I have a video for that, I used quad locks Wireless adapter but I have another one that will allow android auto. I am going to mess with that today.

Connect the dongle to BT and then plug the phone into the USB port, I think on those models the USB port is in the compartment above the dash. Unless you get a wireless CarPlay adapter you have to plug it into the USB port. I have a video on that and will have a new video out with a different wireless CarPlay/android auto adapter.

Thanks I’ll try that!!

@@TSWGarage614 by the way, I lost my instructions to my band saw stand that I got months ago. I opened it up and the brand-new Hercules band saw and did nothing with them, except lose the directions. I watch your vid yesterday to get directions, it was helpful. Thank You.

You’re welcome and glad it was helpful!

Ha! I know what you mean. I guess they did not want to pay for the extra page in the book. No problem, im glad this helped!!

Take a multi meter and perform a continuity check

Don't know how amazing I am but I do my best ;) Thank you for watching and commenting! I really appreciate it!

You are welcome!!!

I don't know what would cause that other than overloading the circuit. Maybe the plug itself is bad?

I doubt they improved the wheels. It will not get used a ton but I'll probably be doing the same thing.

Thanks!

I had bought Final Cut pro and seem to like it pretty well. For what I do it does it well. I had tried Premier Pro but found it more challenging than what I wanted to mess with.

They are ok. I think a foot peg would suit me better but I don’t like how a foot peg sticks out. I think I made a good choice because of that.

@@TSWGarage614 I agree with that. I just removed my Indian foot pegs.

@poppysadventures2020 also nice bike by the way. I kinda regret getting the matte black one. Hard to keep clean.

@@TSWGarage614 are you anywhere near Canton? I plan on riding up that way in May.

@poppysadventures2020 not really, I’m south of Columbus. Where you coming from?

I’ve heard a bad plug or maybe a shirt in the wiring could cause it. Maybe someone can comment on this if they had the issue and fixed it.

@@TSWGarage614thank you

That was supposed to say short in the wiring not shirt :D. But you are welcome.

Maybe a bad plug or a short in a wire.

They liked the bike pretty well. It was for my friend’s kid and he rode that thing everywhere.

we put new needles in it. вставляем в него новые иглы.

​@@TSWGarage614обычно ставят жиклёр больше 150 и 155

@SaNyAZloyPunk I’m not sure what size we put in. I’ll ask the guy that did the work on the carb. Я не уверен, какой размер мы вставили. Я спрошу парня, который работал с карбюратором.

@@TSWGarage614 спасибо, но думал поднимали иглы и вставляли жиклёры 155 и 150

@@SaNyAZloyPunk мы отделались только новыми иглами. Может быть, это зависит от того, где вы живете, нужны ли самолеты?

As long as the drive is formatted to FAT32 or exFAT it should just copy over. A dive that is 1 gig or more should work fine. I used the drive that came with my Indian.

@@TSWGarage614 ok thanks brother

@briandaredeviltwitty no problem, let me know if you figure it out. Thanks!!!

@@TSWGarage614 it's downloading now to the bike. My laptop had the file blocked to not open. Went through properties and unblocked and I'm good.

@@briandaredeviltwitty that’s odd but I’m glad you figured it out. Did you turn off the thing that puts the radio to sleep? I need to update mine again as there is the update from November. I’ll just have to look if it’s worth it.

What system do you have.

@@TSWGarage614 It’s cobra on a 92 1400 since new works flawlessly all these years. Took baffles out except for short amount and end caps. It sounds and looks gorgeous.

That’s awesome! This thing sounded like a totally different bike. We took the baffles out also. I really like them.

First off, thanks for your service!! Secondly you are welcome!! I hope you and your family had a wonderful Christmas!!