HUSQVARNA 450 Rancher Review
Vložit
- čas přidán 2. 09. 2022
- 450 Rancher
Engine
450 Rancher
Art no: 970 51 56‑18
Power output 3.2 hp
Cylinder displacement 3.06 cu.inch
Maximum power speed 9,000 rpm
Idling speed 2,700 rpm
Torque, max. 2.6 Nm
Torque, max. at rpm 7,200 rpm
Clutch engagement speed (±120) 4,300 rpm
Fuel consumption 504 g/kWh
Electrode gap 0.02 in
Ignition module air gap 0.01 in
Oil pump type Fixed flow
Exhaust emissions (CO2 EU V)
742 g/kWh
Equipment
Bar length (inch) 20 in
Recommended bar length, min 13 in
Recommended bar length, max 20 in
Chain type SP33G
Gauge .050"
Pitch .325"
Sprocket type Spur 7
Dimensions
Weight (excl. cutting equipment) 11.2 lbs
Lubricant
Lubricant type Husqvarna 2 stroke or equiv. at 50:1
Oil tank volume 0.55 US pint
Oil tank volume 0.26 l
Sound and Noise
Sound power level, guaranteed (LWA) 115 dB(A)
Sound power level, measured 113 dB(A)
Sound pressure level at operators ear 104 dB(A)
A woman who gives her man a new chainsaw is a definite keeper. 👍👍👍
Thank you yes she is a keeper
I gave mine a chainsaw and it’s still sitting empty with the packaging on it 😂
❤@@akhoneybee9076 you can tell your husband to send it to me then. 😂 im just teasing.
Have a nice day. I'm from Russia. Let me tell you, we harvest a lot of firewood. I bought a Husqvarna 450 a long time ago. It makes me happy at work, there is no vibration, there is a reserve of power. Very demanding on the quality of fuel and oil for chain lubrication. Observe this condition and the saw will serve you for a very long time.
I’m a lady that inherited a 450. I came here for a review to see if it was a good saw. I’ve moved out to family land and already have use for this with fallen branches and trees. Thank you for the review and information.
Love my 450. The first start was... reluctant, but it starts, runs, and cuts like a champ now.
For my first saw I was really leaning towards my the Stihl MS271 but now I think I'll go with the 450 Rancher instead 💯👍
We just had a tornado hit our town in Oklahoma a couple days ago and there’s a LOT of damage and downed trees. I bought this chainsaw and it’s helped so much. Thank you for the video and review!
Thanks much for the review, just brought my 450 home, bought it based on yourr and a few others post.. Firing it up tomorrow. Great review and keep up the good work!
Nice surprise!
I’ve had the 455 Rancher for years and it’s been a good saw.
Thanks for the review of the 450
I also have the 455 I loved it .it was so dependable I did have one problem with the 455 the bar oiler did not work well .the 450 has a different oiler and it works great
Just fired this saw up for the first time today. Great introduction video, extremely informative!
Thank you. Good luck with your saw!
You are a genuine nice fella, thanks for the review!
Thank you so much
I love my 450 husky! Great video!
Awesome! Thank you!
Just bought this Saw and gonna use it after-work. Thanks for the review.
Thank you
That was awesome your wife getting you a new Saw my wife bought me a 455 husky chainsaw years ago there definitely keeper's 😁
Thank you I have a 455 it is great but it was getting old
Glad I watched your video! I thought your start switch stayed where it was when you gave it its first couple of pulls, then push down and get ready to Unn-UNN! Incidentally, my small engine recommended the Rancher over the Stihl. He said, "Less problems and easier to work on!" Thanks again! Steve in MT
Bought one for my Dad, He loves it.
I have a great dealership that checks everything before handing the tool over. I use the 455, and it has run perfectly every time! The non ethinel fuel is way too expensive and bit of a con, I use Husqvarna XP and it does pretty much the same, no issues so far!
I also have a 455 I love it only problem is oiler it stretches chains prematurely
I also have a 455 and love the power. I have noticed if I push the primer button one to many times it floods and I have to remove the spark plug to dry it out. Another problem I had when doing this is putting it back together I started noticing it was hard to start so in checking it out I noticed the sparkplug wire was not seating properly and riding on top of the spring clip tto the sparkplug. Once I figure that out and get it aligned properly it fires right up.
I have also a 450 ii .
It's agreat saw before a had a 350 and it whas a very good saw .
I had him for 20 years and have never be problems.
Just bought a 450 rancher to replace my 25 yr old 345. Nice saw!
bought mine at work for tax free weekend here in western Mass. " i work at TSC" and i love my 450. from big 25" logs i gotta buck up, to trimming the branches on down trees. Good do all saw i recommend to any home owner looking to buy just 1 saw.
Thank you
I just sub'd....You have the looks, voice, and disposition to be great on youtube.....If you pursue it want it. I'm usually right. 92% of the time...I'll stay tuned for a while.
Thank you
Cool dog
I’ve ran the 450 at work and I really like them. I ended up busting the tank on it and had to get a stihl 261 and it’s a good saw. I like both husqvarna and stihl. The husqvarna 550xp is about the same size as the 450 but I think the 550 is lighter
Thank you I have had mine about 3months now cut about 8 full cords of fire wood still works great
I have had a 450 since 2009. Good saw. Own a 550 m2, insane saw. 550 is heavier but has more hp. Like them both.
Nice video and review of Husqvarna 455 Rancher 20". I bought the same saw last Saturday and the place where I got it never told me that if I bought their fuel and I would extend my warranty, I guess I missed out on getting the warranty....Hopefully I can find a way to do so. thanks again.
Go back and ask hopefully they will honor the garinte promotion
Thanks just both mine
Good luck I hope it goes well
I'm looking at getting a 450 for my old man, ive already got a 592XP and a 572XP husqvarnas, just need to get a nice light weight saw
I just watched your video and I too have a 455 Husky like you and I want to get a back up saw just in case. I noticed one thing that is different between the two and the 455 has 2 bar tightening bolts to secure the bar down tight which I really like as compared to the 450 only having one bolt. That make the two uncompatable for switching side covers and my biggest problem is with the bar and chain loosening up more frequently. What do you think? I was a Northern California Logger back in the 1970's Up until 1990 and I ran Chainsaw every day. I love my 455 because it is very powerful and cuts great.
I like you your cut G
3/4 throttle for first tank break in, and run at 3/4 under light to moderate cutting load, not free revving.
Chip ejection is strong
First time it’s ever been started let’s hold it wide-open throttle.
Is that a 20” bar or 18?
Husk-A-varna?
My pull string broke after the second time pulling on it. That was a real treat fixing myself. And this thing leaks bar oil so badly I have to keep a garbage can lid under it when not in use because it drains the whole tank.
mine does the same. Leaks bar oil like crazy. I've had mine for about 4 years and I religiously drain the fuel out of it (no exceptions) if i'm not going to use it for long periods of time, to make sure it never sucks in bad 2 stroke gas. Mine will run for about 10 minutes and then quit, and that's it for the day, it won't restart. I've tried letting it sit, adjusting the high and low throttle screws, nothing works. It quits after about 10 minutes.
@@chrisloesch1870 I just make sure to run mine once a month or so. Even if you drain the fuel, it’ll get gummed up in the carb and lines.
My dad bought one from Lowes, damn thing started overheating like crazy and chain loosens too much. Cut good when it was good but started overheating and turning off. 👎
same. Mine is impossible to keep the chain taught.
You didn’t do the break in
Wish I had gone with the 455 over the 450
Dont rev it up like that when its cold.. you’ll seize it eventually! Leave it on idle for 45 seconds and start rippin her!
That 450 is a complete pile of shit because 1 bought one & ran 1 tank of fuel & the oil tank was still 3/4 full & my bar & chain are smoked because they got to hot. Common sense simple when you run a tank of fuel out the oil should be 95% empty if not 98% empty. Now you would think that Husqvarna would have somebody with a little more education than a preschooler would figure that out since that is their business that they are in. How is every other brand of chainsaw Echo Homelite Craftsman Ryobi Stilh McCulloch & so on figured out 1 full tank of fuel = 1 full tank of oil
I'm not super thrilled with my 450 either. Mine it's impossible to keep the chain taught. The tightening screws and slot on the saw are pure garbage design. Mine runs for about 10 minutes and then overheats and shuts down for the rest of the day. I use 2 stroke and plenty of chain oil but it just doesn't run well for extended periods. Next saw i get will be a Stihl, I don't care how expensive it is. I've never had issues with Stihl power equipment.
I don't know why such a big bar
it is a mistake
the bigger bar is more expensive and so is the chain
the same 450 with a 15 or 16 inch bar cut twice as fast
and for those who know how to cut a short bar, it's fine
but see if you're far away that you don't know what you're doing
and the chainsaw 450 rancher is not even professional
does the job but barely, too slow
these americans are a comedy
We have big trees here. 15 or 16 inch wouldnt do it. Also fewer the teeth more you often you need to sharpen.
And we are here small farmer not logger. This chainsaw more than.enough for us.
Also best that we can effort.
Where did u hear anyone claim this was a professional saw 🤦
These Americans ? You wish you were born in this beautiful country
Oh yah well i run a 24" bar on my 450 and there's nothing you can do about it 🤣
What a genuinely dumb reply.