Festool MFS System Overview
Vložit
- čas přidán 27. 07. 2024
- In this video Sedge walks us through the MFS router template system from Festool. Sedge covers basic setup, individual comments and you guessed it, a lot of tips and tricks along the way.
We are aware the MFS routing system is not available in the US and CAN. That being said, we are also aware that a lot of you have purchased this system and have some questions.
#MFS #router #template
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode VideoMic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Derick “Big D” Clements who has NO CLUE about woodworking but is ready to learn. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...
This demo is SO AMERICAN!!!
Great video though guys 👌🏼
Thanks !!!
Never knew about the MFS , but now I do and I now know that I want it. And it is metric. Thanks Sedge for the video
Thanks for watching Ian !!!!
Great video full of good info Sedge. I purchased the MFS 400 System a couple of months ago after having it sitting in my Amazon Wish List for a while. It dropped in price and I went for it! Haven’t used it yet. But after seeing this video, I’ve already got several uses in mind. Thank you again. Looking forward to the follow up videos. Keep up the great work… 👍🏻
Great to hear!
Great video guys, I’ve often thought about getting one, now seeing this video I might keep an eye out. Keep up the great work guys 👍👍👍
Thanks Russ......... The MFS system is well worth it !!!!
Thank you, Sedge - great post!!! Please, Please, Please post more on things we can do with this system. Thanks in advance!
Will do!
Awesome as always!
Thank you! Cheers!
Great video, lots of tips, the rare earth magnet sweet - Thanks!
Glad it was helpful!
Great video Sedge and all the team I now realise I need to order one 🤦♂️💯👍👍👍
Thanks Ian !!!!
Great content & knowledge, hope you guys show us what we can do with it all
The videos are working....
Thanks for the great videos bud
You bet..lots more to come !!!
Damaged my first MFS400 when I forgot to put back the template guide :) Still salvaged some of it by flipping it. Bought another one and the 2 together is quite versatile. Have used it often. Great accurate results every time. Square holes with steps are possible using different template guides (say 40mm and 17mm eg). Got rid of all the MDF jigs that have single purpose.
Great to hear! =The MFS is very versatile !!!!
Why oh why does Festool limit the distribution of such wonderful products so that they are not. available in North America?
That is a GREAT question Robb .... I really do not know .....
I can’t believe that the new MFT clamps aren’t available in the US.
Great video, now to the elephant in the room, availability - it hasn’t been available in NA. Woodpecker has an extrusion system but not some of the cool add ones (puck for example). On a side note NA isn’t the only market that misses out, the Sys3 slides aren’t available in parts of Europe.
It was available here in the states up to about 6 or 7 years ago........ The reason for the video is that there are a lot of folks that have reached out for help in setting it up !!!
This can sometimes be purchased from Amazon UK and shipped to NA for either no charge or for a reasonable shipping charge depending on the whims of the Amazon algorithm through Amazon Global.
On my MFT I use a 1000mm profile as a "fence" -- I butt it to dogs dogs and clamp it in place -- and 4 of the 400mm profiles to make a square that I butt up against the 1000mm profile. I use that to square the rail to the fence. Doing cross cuts or rips I clamp the 400mm square and push the work piece against the square profile to make repeatable cuts. I'm sure there are other ways to do this and in future videos it would be interesting to see how to adapt the MFS profiles on the MFT for cuts.
Thanks John ....
I had a job that I needed multiple templates for. I bought 20mm profiles and hardware to make my own. It works well obviously not a system like Festool. The support puck is a good idea might have to 3D print one
Ahhhhhhh....as usual .... Matthew you always think outside the box .... Great job !!!
Search thingiverse for FESTOOL MFSDIY if you haven't found plans for the puck already.
@@brendon72 thanks for the tip
Wish I would of bought it when I had the chance.
Still might find one kickin around on FB marketplace or Craigslist >>>>>>
The first thing I did after seeing this was to try to buy one but found out it’s no longer sold in the US!
The MFS is still available in other markets...just not in North America...
We can use it on doors with the provided brackets. But still did not use it like that to use the mfs as custum jig to make holes for door handles and locks
🤙👍
Two piece template guides are available in a set from Axminster Tools. The sizes are 10,12,14,16,18,20,24 and 30mm for $61.00.
Thanks Rick !!!!
Sedge since, Festool cancelled the MFS have you seen or used the Otterbox tool.
I have not
Sedge, how do I go about buying this system?
Available in Europe ....
EBay Occasionally. I landed one a month or so back. Full set minus the 2000’s
Why is it not available in North America?
The MFS was at one time here in North America ....... Festool discontinued it for some reason...
czcams.com/video/pDbHS2EtfIQ/video.html This is you.
Thanks David....I remember .....Hope all is well with you !!!!!
Hey buddy its Brent from the international tool days... squints and smalls... me and rich... how's it going... love to hear from you
Duuuuuude .... Smalls !!!! F-o-r-e-v-o-r !!!!! Send me DM on Instagram @sedgetool or email me at sedgetool@gmail.com !!
I'd buy this, I own a ton of Festool thanks to Festool Live, but for some reason this is unavailable.
It is available in Europe.... just not in North America..
@@sedgetool One could probably make one with extrusions from 8020.