In my last video I discussed why it is necessary to get an oil/water filter for my Yong Heng Compressor. In this video I discuss how best to set up the filter.
I am s-l-o-w-l-y getting started in this game and as such I spend a lot of time looking over old and new information . I found your post today and I have to tell you the "tree stand" is a Super Cool way to set up the vertical filtering system. Those stands are generally cheap and can be found anywhere. The footprint is wide enough to prevent the filter from tipping over. Thank you for sharing this idea and thank you for the rest of the information you provided in this video. Looking forward to watching the other video's you have produced!!!
Another Home Run Video, Aaron! I really enjoy your videos. They are easy going and informative. I went with a different compressor but the main thing with any compressor is not pumping water into your bottle or gun. As you said in another video, running the compressor after a fill to purge moisture from the compressor should not be forgotten. Thank you for what you do and Happy New Year!
Thank you Aaron for making all these videos. I just ordered the Yong Heng and the filter that you recommended. Hopefully I'll have the same good results with the system as you have had.
I would almost guarantee that you will have a Good experience and service from this system. In fact the only failure I have ever heard of is when they forget to plug in the water pump resulting in failure. But they got the parts they needed on Alie Express and made the repairs in no time. So make sure that the water is flowing every time. Thanks for watching and best of luck.
I just purchased the Tuxing Oil/Water separator and, following in your footsteps, I've attached it (upright) against the Christmas tree stand. It's a simple rigging solution---and it works! Aaron, you're on my top 10 list of CZcams air-gunners who offer valuable information and tell it like it is. Many thanks!
Hey Aaron, I'm kinda new to PCP air rifles. I work on high pressure air compressors and high pressure air dehydrators when at work. Some pointers I'd like to give you that will ensure the air you put in you bottles is dry.Air is like a sponge, when you squeeze a sponge the water falls out, when you compress it at some point in the compression the air reaches saturation, when that point is reached 3 things have collided " pressure " moisture content" and "saturation temperature". A simple thing you could do is install a back pressure valve set at lets say 4200 psi, have the valve installed as the last fitting before the air goes into a bottle of gun. In doing that when the air is squeezed to 4200 psi and then the back pressure valve drops it to what ever pressure you charge the bottle or gun to lets say 3500 psi that 700 psi drop expands the air causing a separation of saturation temperature and pressure, just like wringing out a sponge. The other thing I would do is the cylinder you have, the gold colored one, if you could wrap that with a wet cloth and blow a fan on it you will get a chilling effect like a swamp cooler and that will aid in condensing out moisture from the process air, if you could submerge it in ice water would be even better but I think that is a little extreme. Also what I would do, on the cooling water, I'd get some copper tubing maybe 1/4 inch of the soft refrigeration type and wrap it around the discharge pipes of the compressor (the ones that get hot) just coil it around the pipe. I'd then route the water returning into the bucket thru those copper tubing's and then into the bucket. The compressor will run cooler and you will get more water and oil out of the air.
I had never heard of compression aiding in dehydrating the air and Ice water ideas sound good. You have some great ideas on how to keep the compressor cool. Thanks for the information. Best of luck.
Glad to hear that you are in the PCP club. All things in time. Enjoy where you are the rest will come in time. Until then keep pumping and shooting. Thanks for watching.
awesome information my friend I only have a 3 litre dive bottle so I could do with a compressor especially now I will be filling an FX Crown carbon bottle thank you for your informative videos
I find that it is easier to just Fill my FX impact straight from the Comprssor. It takes it to 3,500 psi in no time and I can shoot the .177s all day with one fill. Thanks for watching.
I picked up a tree stand from amazon as of my post it was $9.99 on sale. The legs fold up, I plan to use only 3 legs and wire tie the separator on to the side that's folded up. With the legs folded up it takes up less room, being steel its sturdy an stable
Excellent video Aaron, thanks for sharing. It will be possible for you to upload a video when you perform maintenance on the YONG HENG compressor, please.
Sorry I'm so late getting b to you. There are videos on CZcams that show how to dissemble and even how to make repairs. So please check them out. Thanks for watching and for your comment.
I know I just got a S9 and the notifications are driving me crazy but if I turn if off I feel like i'm going to miss something. Hope you get lucky on tinder. Happy holidays and thanks putting up with my many notifications.
I own an Air Venturi Nomad 11 portable air compressor and just directly fill m Air Arms S510 XS Ultimate Sporter in .22 caliber with the laminate stock and yes it is the regulated version that I waited 7 months for. It is beautiful and extremely accurate. I don’t have to worry about scuba tanks. I have a hand pump for out in the woods if needed.
Look at your photo I can see that you can handle a hand pump with little effort but us old guys don't have the time or energy for that. Also great choice of guns in the Air Arms. Thanks for watching.
aaron cantrell I have a hand pump. It is a back up, not a primary fill source. I go to the gym for a workout, not shooting my gun. LOL, I enjoy your videos, always good knowledge shared. Merry Christmas and keep up the good work.
@@airguns_rc I know you have a primary fill source. I was just kidding because in your photo you look like professional linebacker. Have a great holiday season.
aaron cantrell It’s all good Sir. I enjoy your videos and learning from them. Have a great and safe year in 2019 and have fun shooting. Hitting it hard in the gym, and not on the hand pump, LOL. I haven’t use. My Air Venturi Hans pump yet, and I do need to get the moisture filter for it. I enjoy shooting all of my Airguns, firearms, compound bow, and traditional long bow. Always a good day when you can enjoy the outdoors and enjoy shooting. Keep up the good work Sir.
Good video, I see a lot of people recommending the yong heng compressors but rarely mentioning the importance of filtering , For anyone buying a cheap compressor, While they are certainly great value, I wouldn't let it near a decent rifle without a good filtration system. p.s merry Christmas, Hope your didn't get in too much trouble for taking the tree down every time you wanted to go shooting :-)
The water itself is not necessarily a problem in quality built guns (bigger problem with cheap metals). But the real issue, is the water freezing under pressure. It can destroy valves, etc. if the water freezes at high PSI ejection.
I just installed a filter on my yong heng and replaced the molecular sieve that came with it 5-6mm, with some that is 0.5-1mm in diameter. It seems to work. Also I bought a hiking type water bottle that has a straw that goes right to the bottom. I drilled a hole near the top, where I attached a section of the straw to the inlet of the compressor using another fitting (not sure what the size is). I then filled the bottle with desiccant, so that the spout that is usually used to drink from, is forced to suck the air down the straw, through the desiccant, then through the original filter screw, through the cut section of straw and into the compressor. That way it reduces the amount of moisture going into the compressor itself.
I like to have it first go through the cotton then the molecular sieve and then the charcoal. However I have now taken out the charcoal because I was told that the charcoal is for diving. Now I put in double cotton first to make sure the oil is trapped and the Molecular sieve last to take out the water.. Thanks for watching.
Remember that if a gun takes 2900 psi and your tank can only hold 3000 psi after the first fill your tank can no longer take the gun to max pressure and each time after it just keep getting lower. Something to keep in mind for the future Thanks for watching.
Great and very informative videos. I’ve been watching several of your videos and I have purchased one of these Yong Heng Compressors for filling my HPA Tanks for paintball a couple weeks ago. Everything has been 100% on my end and I have the same system. No issues at all. Do you think the desiccant is unneeded or would it be okay to use both the desiccant beads and the molecular sieve beads together? I also may add one more Cotton Filter at the end of the big gold water filter, just to catch anything else that might pass through, for the last stage before the air goes to my tank. Would you say this is a good or bad idea? Appreciate your information and clear guidance. It helps us out a lot. I subscribed.
Everyone is telling me that I should use the beads and cotton because that will take care of the water and oil that could be a problem. I would put the cotton oil filter first before the beads to keep oil off of them. In my case I think I am going to put cotton, beads and then cotton again when I change my filter. Thanks for watching and for subscribing. Best of luck.
Amazon has that filter for about $90 I use the alpha filter but that’s $400 I was thinking to get that filter and try it as a first stage and use the alpha filters as a secondary and try to see if anything makes it to my it to my alpha filter ...I have 3 compressors and the young heng it’s my cheapest one i like cause it’s convenient I also have a $2800 scuba compressor the young heng is the one I use the most good one for the money
If your have a a $400 Alpha I think it is overkill to add another. Just use the original Yong Heng filter as I do for a pre filter and change it often. Just my thought. Thanks for watching.
Quick question Aaron, I filled my tank to 4500psi and I mistakenly closed the valve on the tank before turning off the compressor or releasing the air from the drain screws and now my Yong Heng compressor blows air out of the black oil fill cap instead of the fill hose, do you have any idea of what the issue could be I would really appreciate it ,TIA
I like my Yong Heng but you do need to operate it correctly. I had to return the first one I bought. So turn it on with the black knobs turned out and run a minute or two then tighten the black knobs. Depends on outside temp for worm up colder temps run more, hotter temps run less. Before turning it off depressurize (black knobs out) before shutting it down. I have had mine for 1 year.
Hi Aaron, I bought the Yung Heng compressor last week and watched both your videos about it, I liked your Xmas tree stand idea. This is my first compressor and I wrap the wet towels around the tubing like you suggested and put radiator fluid mixed with distilled water. I ordered the oil water separator, and a 4ft fill hose. The only thing I didn't order yet is the 90° elbow fitting I noticed on your compressor. I was only able to find one rated 2800 psi maximum. Is there ones rated higher? Thanks for all the information.
I did not put an elbow on my compressor but I have put them on my fill adaptor. I just went to Lows and got 1/4 inch elbow from their plumbing department. No problem yet. So the 2800psi should work I guess. Best of luck.
Today when I got my gamo urban I thought I didn't pull it back far enough so I pull the bolt back twice putting 2 pellet in it at once when I shot one pellet came out the side really fast I though I mess up the silencer I got lucky anyway nice video.... Isn't it possible to used car air compressor sorry for all the questions
No a car compressor can only pump up to about 150 psi. I have had hundreds of double feeds but never had any come out sideways. Are you sure that is what happened. Thanks for watching
@@aaroncantrell8819 yeah i took the silencer off it had lead on it IDK if that is from shooting it or from where that happen but it went out fast enough to hurt. I had the mag out when it did that. Those
@@hondadeluxe8201 My friend Ken once had a gun that just wouldn't shoot straight. He later found that the shroud was damaged and each pellet was hitting it causing the inaccuracy. I wanted to pass that on just in case. Thanks again.
Aaron: Your air must be drier than a popcorn-fart (as my dad used to say) However I think it is over kill. I use the first stage and change the cotton every use (they are cheap) Thanx for Ur take on wet PCPpp"s
I really researched this topic before marking this video and all the experts say that this kind of filter is a must and if the filter is not used correctly they are not effective. So my video contains all their information and recommendations. Better safe than sorry especially if the solution only cost $99.00. Thanks again.
I had no problem with that. However, if you are having problems just pick up a few extra male and female fitting on eBay. I find that the quality is often better than those that come on the hoses, tanks, filters etc. These are the ones I purchased: www.ebay.com/itm/363616280262?hash=item54a9381ec6:g:EFYAAOSwNnVhijK4 Best of luck.
Just go to Good Will, Salvation Army, or any used store and get a standing lamp and cut it down or any thing that has a round or has three legs and make it work. You may have something laying around the house. Thanks for watching.
I have not changed my filters since I got it. Because it is vertical when you bleed out the 3,500 psi it pushes most to the moisture out. Then I opuen it to let it dry out. So I don't know when I will change it . Do a search on CZcams and maybe someone has an answer. thanks for watching.
Hello aaron Got a new question for u. Bought the yong heng. Now trying to decide in an oil. The book calls for aw or iso 46 but recommends mobil 827/829. The 46 i's a 15 weight oil while the 827 is higher. Not to mention expensive. And I've also read a few comments on the net about using air comp oil that is rated for scuba or human air consumption.... what you think buddy?
Ken and I use #46 Hydrolic oil. It is a clear oil so you will know when to change it by watching to see when it starts to get dark. I hope this helps. Thanks for watching.
John Brewer: I sprung for the more expensive synthetic oil, Amazon $8.95 a quart. It is clear and cheaper than any syn. I have used synthetic oils for 30yrs and they well worth the money.
@@back2backjack1 thanks robert. Im going to do jyst that. Im jyst trying to decide on scuba compressor type oil( assuming that the oil doesn't release as much of the smell).. or an equal to the the mobile 827 they recommend...
Hello Aaron, Question:: I have installed this same setup with just beads. I have a problem here. During fill-ups when the pressure gets to around 150 bars the compressor struggles and will not continue filling to my required 200 bars. My compressor does not have a auto pressure shut-off.. To me it seams as though the high pressure may be compressing the beads so tightly that the air flow is restricted (just a guess).After removing the filter everything returns to normal,. Have you had this problem or have you heard of this problem with this filter before?
I have now heard of that problem before. The beads cannot compress as the air will travel around them. Try placing a cotton filter at the end of the filter as one of the beads could be clogging the outlet. I have cotton at both ends of my filter with the beads in the middle. I am glad to know that it is not the compressor itself. Thanks for watching and best of luck.
In that case I just don't know what could be causing it because the air passes around and through the pellets so they can compress. Wish I could be of more help. Thanks.
I just talked to ken and he has had his for almost three years and he says that his will now not compress over 3000 psi and then it blows a fuse. He thinks it is the motor not being able to push the piston past 3000 psi. I just wanted to pass that along too. Thanks again.
Well if kin decides to try a fill by bypassing the filter and go to a straight fill I would surely appreciate to know if his compressor returns to normal and goes past 3000ps, Mine works perfect without the filter.r@@aaroncantrell8819
No offense, but I don't think you really understand how a desiccant like Molecular Seive or Silica Gel works. Both those materials actively absorb water and bind it until saturated, at which point it may as well not be there because it isn't going to absorb any more water. The only time you'll see liquid water is when the material cannot actively absorb any more so leaving the bottom end open to 'let it drain out' will not work - either the material is 100% saturated or (if not) it will continue absorbing water from the air until it is. It will not 'dry out' if left on its own, you have to use energy to drive off the water, such as heating to 350degC in an oven for 4-5 hours. Once dried it's good to go again. Molecular Seive is a bit more aggressive/faster than silica gel for absorbing water, and consequently requires more energy to force it to give up any water it has already absorbed. Don't ever leave it in an uncapped container for any length of time.
Aaron I hate you now another thing to buy. Going to buy a harbor freight $10.99 12x 18 wood rolling cart to move it outside to porch. 6x16 covered porch. Will be easy to mount the filte4 as the Yong heng measures 12 X 18 and will fit crossways .to crippled up to carry a 30 pound thing while using a walking stick.
Sounds like a good plan I think I am going to copy it. My compressor is on top of the washing machine and driving my wife crazy. A cart would allow me to put it away when not in use. Thanks for the idea. Best of luck.
If I can give advice based on real research that says this is a good practice for protecting your PCP then comments like yours have no merit. It funny how some people trip on notions derived from nothing except a baseless ideas. Thanks for watching.
I am s-l-o-w-l-y getting started in this game and as such I spend a lot of time looking over old and new information . I found your post today and I have to tell you the "tree stand" is a Super Cool way to set up the vertical filtering system. Those stands are generally cheap and can be found anywhere. The footprint is wide enough to prevent the filter from tipping over. Thank you for sharing this idea and thank you for the rest of the information you provided in this video. Looking forward to watching the other video's you have produced!!!
Another Home Run Video, Aaron! I really enjoy your videos. They are easy going and informative.
I went with a different compressor but the main thing with any compressor is not pumping water into your bottle or gun. As you said in another video, running the compressor after a fill to purge moisture from the compressor should not be forgotten.
Thank you for what you do and Happy New Year!
Thank you for the compliment and for watching. Best of luck with your compressor.
Thank you Aaron for making all these videos. I just ordered the Yong Heng and the filter that you recommended. Hopefully I'll have the same good results with the system as you have had.
I would almost guarantee that you will have a Good experience and service from this system. In fact the only failure I have ever heard of is when they forget to plug in the water pump resulting in failure. But they got the parts they needed on Alie Express and made the repairs in no time. So make sure that the water is flowing every time. Thanks for watching and best of luck.
I just purchased the Tuxing Oil/Water separator and, following in your footsteps, I've attached it (upright) against the Christmas tree stand. It's a simple rigging solution---and it works!
Aaron, you're on my top 10 list of CZcams air-gunners who offer valuable information and tell it like it is. Many thanks!
Thank you for watching I am glad to be of help. best of luck.
Hey Aaron, I'm kinda new to PCP air rifles. I work on high pressure air compressors and high pressure air dehydrators when at work. Some pointers I'd like to give you that will ensure the air you put in you bottles is dry.Air is like a sponge, when you squeeze a sponge the water falls out, when you compress it at some point in the compression the air reaches saturation, when that point is reached 3 things have collided " pressure " moisture content" and "saturation temperature". A simple thing you could do is install a back pressure valve set at lets say 4200 psi, have the valve installed as the last fitting before the air goes into a bottle of gun. In doing that when the air is squeezed to 4200 psi and then the back pressure valve drops it to what ever pressure you charge the bottle or gun to lets say 3500 psi that 700 psi drop expands the air causing a separation of saturation temperature and pressure, just like wringing out a sponge. The other thing I would do is the cylinder you have, the gold colored one, if you could wrap that with a wet cloth and blow a fan on it you will get a chilling effect like a swamp cooler and that will aid in condensing out moisture from the process air, if you could submerge it in ice water would be even better but I think that is a little extreme. Also what I would do, on the cooling water, I'd get some copper tubing maybe 1/4 inch of the soft refrigeration type and wrap it around the discharge pipes of the compressor (the ones that get hot) just coil it around the pipe. I'd then route the water returning into the bucket thru those copper tubing's and then into the bucket. The compressor will run cooler and you will get more water and oil out of the air.
I had never heard of compression aiding in dehydrating the air and Ice water ideas sound good. You have some great ideas on how to keep the compressor cool. Thanks for the information. Best of luck.
Great video. I'm still hand pumping but as soon as I can afford it I'm getting that same compressor. Thanks for the information.
Glad to hear that you are in the PCP club. All things in time. Enjoy where you are the rest will come in time. Until then keep pumping and shooting. Thanks for watching.
Improvise, adapt, overcome... good stuff!
Thanks you for watching.
Great job
Truly appreciate the work that you put into showing us what Actually Works 👌🏽
Glad to be of help. Best of luck.
Nice job Aaron...good stuff. Simple but effective. Merry Christmas.
Thank you very much
Merry CHRISTMAS. Thank you.
Merry Christmas to you as well. Thanks for watching
Thank you very much,Merry Christmas.
Happy holidays and Thanks for watching.
thanks, Aaron, really appreciate you!
awesome information my friend I only have a 3 litre dive bottle so I could do with a compressor especially now I will be filling an FX Crown carbon bottle thank you for your informative videos
I find that it is easier to just Fill my FX impact straight from the Comprssor. It takes it to 3,500 psi in no time and I can shoot the .177s all day with one fill. Thanks for watching.
Just bought one ( sick of the pump lol ) great vids 👍 thanks from Wales UK..
Make sure it is vertical to insure the water stays on the bottom of it. Thanks for watching.
Very ingenious sir! Thank you for sharing your experience...
Thanks you for watching.
I picked up a tree stand from amazon as of my post it was $9.99 on sale. The legs fold up, I plan to use only 3 legs and wire tie the separator on to the side that's folded up. With the legs folded up it takes up less room, being steel its sturdy an stable
Thank you for a great video. I will setup mine like your.
Keep it cool and the oil changed, and it can last for several years. Best of luck
Thank you for what you do..Easy peasy.
Thanks you for watching what I do. Best wishes.
Excellent video Aaron, thanks for sharing. It will be possible for you to upload a video when you perform maintenance on the YONG HENG compressor, please.
Sorry I'm so late getting b to you. There are videos on CZcams that show how to dissemble and even how to make repairs. So please check them out. Thanks for watching and for your comment.
Many thanks Aaron 🥰
Dammit man, your phone notifications kept me thinking i was getting lucky on tinder!
I know I just got a S9 and the notifications are driving me crazy but if I turn if off I feel like i'm going to miss something. Hope you get lucky on tinder. Happy holidays and thanks putting up with my many notifications.
I own an Air Venturi Nomad 11 portable air compressor and just directly fill m Air Arms S510 XS Ultimate Sporter in
.22 caliber with the laminate stock and yes it is the regulated version that I waited 7 months for. It is beautiful and extremely accurate. I don’t have to worry about scuba tanks. I have a hand pump for out in the woods if needed.
Look at your photo I can see that you can handle a hand pump with little effort but us old guys don't have the time or energy for that. Also great choice of guns in the Air Arms. Thanks for watching.
aaron cantrell I have a hand pump. It is a back up, not a primary fill source. I go to the gym for a workout, not shooting my gun. LOL, I enjoy your videos, always good knowledge shared. Merry Christmas and keep up the good work.
@@airguns_rc I know you have a primary fill source. I was just kidding because in your photo you look like professional linebacker. Have a great holiday season.
aaron cantrell It’s all good Sir. I enjoy your videos and learning from them. Have a great and safe year in 2019 and have fun shooting. Hitting it hard in the gym, and not on the hand pump, LOL. I haven’t use. My Air Venturi Hans pump yet, and I do need to get the moisture filter for it. I enjoy shooting all of my Airguns, firearms, compound bow, and traditional long bow. Always a good day when you can enjoy the outdoors and enjoy shooting. Keep up the good work Sir.
Good video, I see a lot of people recommending the yong heng compressors but rarely mentioning the importance of filtering , For anyone buying a cheap compressor, While they are certainly great value, I wouldn't let it near a decent rifle without a good filtration system.
p.s merry Christmas, Hope your didn't get in too much trouble for taking the tree down every time you wanted to go shooting :-)
You are right a filtration system is a must. Didn't get in trouble because I found the tree stand at a thrift store for $2.00. Thanks for watching.
Merry Christmas Aaron
Thank you. Merry christmas and happy holidays to you and your family.
Thank's aaron for the info
You are welcome. Thank you for watching. Best of luck.
The water itself is not necessarily a problem in quality built guns (bigger problem with cheap metals). But the real issue, is the water freezing under pressure. It can destroy valves, etc. if the water freezes at high PSI ejection.
I just installed a filter on my yong heng and replaced the molecular sieve that came with it 5-6mm, with some that is 0.5-1mm in diameter. It seems to work.
Also I bought a hiking type water bottle that has a straw that goes right to the bottom. I drilled a hole near the top, where I attached a section of the straw to the inlet of the compressor using another fitting (not sure what the size is). I then filled the bottle with desiccant, so that the spout that is usually used to drink from, is forced to suck the air down the straw, through the desiccant, then through the original filter screw, through the cut section of straw and into the compressor. That way it reduces the amount of moisture going into the compressor itself.
I like the idea of attacking the moisture before it enters the compressor. I think I will look into that possibility. Thanks for watching.
Qyuubi786- Would it be possible for you to link to a picture (or video) of what exactly you have done? It sounds promising! Thanks
@@thomass8362 Sure I'll do a video on it. It shouldn't take too long.
@@thomass8362 Here is the video.
czcams.com/video/CeKiK0fFXgE/video.html go to 2.15 for the part about the filter.
Looks good
Thanks for watching.
When mounting the filter is the charcoal at the top and the molecular sieve at the bottom
I like to have it first go through the cotton then the molecular sieve and then the charcoal. However I have now taken out the charcoal because I was told that the charcoal is for diving. Now I put in double cotton first to make sure the oil is trapped and the Molecular sieve last to take out the water.. Thanks for watching.
My air rifles only take 2000 for 1 and the other one is 2900 IAM thinking about get one these! I really enjoy your videos!
Remember that if a gun takes 2900 psi and your tank can only hold 3000 psi after the first fill your tank can no longer take the gun to max pressure and each time after it just keep getting lower. Something to keep in mind for the future Thanks for watching.
@@aaroncantrell8819 I was going to fill my guns with that compressor
@@bryanmorgan8940 That is a great choice. Sorry for the misunderstanding. Merry Christmas.
@@aaroncantrell8819 Merry Christmas to you
Great and very informative videos. I’ve been watching several of your videos and I have purchased one of these Yong Heng Compressors for filling my HPA Tanks for paintball a couple weeks ago. Everything has been 100% on my end and I have the same system. No issues at all. Do you think the desiccant is unneeded or would it be okay to use both the desiccant beads and the molecular sieve beads together?
I also may add one more Cotton Filter at the end of the big gold water filter, just to catch anything else that might pass through, for the last stage before the air goes to my tank. Would you say this is a good or bad idea? Appreciate your information and clear guidance. It helps us out a lot. I subscribed.
Everyone is telling me that I should use the beads and cotton because that will take care of the water and oil that could be a problem. I would put the cotton oil filter first before the beads to keep oil off of them. In my case I think I am going to put cotton, beads and then cotton again when I change my filter. Thanks for watching and for subscribing. Best of luck.
Amazon has that filter for about $90 I use the alpha filter but that’s $400 I was thinking to get that filter and try it as a first stage and use the alpha filters as a secondary and try to see if anything makes it to my it to my alpha filter ...I have 3 compressors and the young heng it’s my cheapest one i like cause it’s convenient I also have a $2800 scuba compressor the young heng is the one I use the most good one for the money
If your have a a $400 Alpha I think it is overkill to add another. Just use the original Yong Heng filter as I do for a pre filter and change it often. Just my thought. Thanks for watching.
Very nice set up , is that a tree stand , just gave me idea for my setup , very good presintation.
Thank you and best of luck.
Quick question Aaron, I filled my tank to 4500psi and I mistakenly closed the valve on the tank before turning off the compressor or releasing the air from the drain screws and now my Yong Heng compressor blows air out of the black oil fill cap instead of the fill hose, do you have any idea of what the issue could be I would really appreciate it ,TIA
I like my Yong Heng but you do need to operate it correctly. I had to return the first one I bought. So turn it on with the black knobs turned out and run a minute or two then tighten the black knobs. Depends on outside temp for worm up colder temps run more, hotter temps run less. Before turning it off depressurize (black knobs out) before shutting it down. I have had mine for 1 year.
Great ideas on how to maintain the compressor for many years of service. Thanks for watching.
Sorry this is so late but I just found your comment. Thanks for watching.
Hi Aaron, I bought the Yung Heng compressor last week and watched both your videos about it, I liked your Xmas tree stand idea. This is my first compressor and I wrap the wet towels around the tubing like you suggested and put radiator fluid mixed with distilled water. I ordered the oil water separator, and a 4ft fill hose. The only thing I didn't order yet is the 90° elbow fitting I noticed on your compressor. I was only able to find one rated 2800 psi maximum. Is there ones rated higher? Thanks for all the information.
I did not put an elbow on my compressor but I have put them on my fill adaptor. I just went to Lows and got 1/4 inch elbow from their plumbing department. No problem yet. So the 2800psi should work I guess. Best of luck.
Today when I got my gamo urban I thought I didn't pull it back far enough so I pull the bolt back twice putting 2 pellet in it at once when I shot one pellet came out the side really fast I though I mess up the silencer I got lucky anyway nice video.... Isn't it possible to used car air compressor sorry for all the questions
No a car compressor can only pump up to about 150 psi. I have had hundreds of double feeds but never had any come out sideways. Are you sure that is what happened. Thanks for watching
@@aaroncantrell8819 yeah i took the silencer off it had lead on it IDK if that is from shooting it or from where that happen but it went out fast enough to hurt. I had the mag out when it did that. Those
@@hondadeluxe8201 My friend Ken once had a gun that just wouldn't shoot straight. He later found that the shroud was damaged and each pellet was hitting it causing the inaccuracy. I wanted to pass that on just in case. Thanks again.
Aaron: Your air must be drier than a popcorn-fart (as my dad used to say) However I think it is over kill. I use the first stage and change the cotton every use (they are cheap) Thanx for Ur take on wet PCPpp"s
I really researched this topic before marking this video and all the experts say that this kind of filter is a must and if the filter is not used correctly they are not effective. So my video contains all their information and recommendations. Better safe than sorry especially if the solution only cost $99.00. Thanks again.
OK@@aaroncantrell8819
I have a question why won't the hose from the compressor fit the snap on on the filter ?
I had no problem with that. However, if you are having problems just pick up a few extra male and female fitting on eBay. I find that the quality is often better than those that come on the hoses, tanks, filters etc. These are the ones I purchased: www.ebay.com/itm/363616280262?hash=item54a9381ec6:g:EFYAAOSwNnVhijK4
Best of luck.
That's the exact set up I've got on order from Aliexpress, now I'm looking for a Christmas tree stand brother .... don't have a spare do you
Just go to Good Will, Salvation Army, or any used store and get a standing lamp and cut it down or any thing that has a round or has three legs and make it work. You may have something laying around the house. Thanks for watching.
Nice video my brother. One question I have is how long does the moisture trap last and when do you know it's time to change?
I have not changed my filters since I got it. Because it is vertical when you bleed out the 3,500 psi it pushes most to the moisture out. Then I opuen it to let it dry out. So I don't know when I will change it . Do a search on CZcams and maybe someone has an answer. thanks for watching.
I have a question where do you buy the longer hoses you have ?
I purchase everything you see for filling the guns on eBay. Good luck.
Hello aaron
Got a new question for u. Bought the yong heng. Now trying to decide in an oil. The book calls for aw or iso 46 but recommends mobil 827/829. The 46 i's a 15 weight oil while the 827 is higher. Not to mention expensive. And I've also read a few comments on the net about using air comp oil that is rated for scuba or human air consumption.... what you think buddy?
Ken and I use #46 Hydrolic oil. It is a clear oil so you will know when to change it by watching to see when it starts to get dark. I hope this helps. Thanks for watching.
John Brewer: I sprung for the more expensive synthetic oil, Amazon $8.95 a quart. It is clear and cheaper than any syn. I have used synthetic oils for 30yrs and they well worth the money.
@@back2backjack1 thanks robert. Im going to do jyst that. Im jyst trying to decide on scuba compressor type oil( assuming that the oil doesn't release as much of the smell).. or an equal to the the mobile 827 they recommend...
Hello Aaron, Question:: I have installed this same setup with just beads. I have a problem here. During fill-ups when the pressure gets to around 150 bars the compressor struggles and will not continue filling to my required 200 bars. My compressor does not have a auto pressure shut-off.. To me it seams as though the high pressure may be compressing the beads so tightly that the air flow is restricted (just a guess).After removing the filter everything returns to normal,. Have you had this problem or have you heard of this problem with this filter before?
I have now heard of that problem before. The beads cannot compress as the air will travel around them. Try placing a cotton filter at the end of the filter as one of the beads could be clogging the outlet. I have cotton at both ends of my filter with the beads in the middle. I am glad to know that it is not the compressor itself. Thanks for watching and best of luck.
There is a metal disk with air holes on the top of and bottom of the filter to prevent that, but I will try cotton also, thanks| @@aaroncantrell8819
In that case I just don't know what could be causing it because the air passes around and through the pellets so they can compress. Wish I could be of more help. Thanks.
I just talked to ken and he has had his for almost three years and he says that his will now not compress over 3000 psi and then it blows a fuse. He thinks it is the motor not being able to push the piston past 3000 psi. I just wanted to pass that along too. Thanks again.
Well if kin decides to try a fill by bypassing the filter and go to a straight fill I would surely appreciate to know if his compressor returns to normal and goes past 3000ps, Mine works perfect without the filter.r@@aaroncantrell8819
Hows the yong heng workg for u alex
I have had my Youg Heng for over two years and it is still going great. Sorry this is so late but I just found your comment. Thanks for watching.
I'll
You need to flip the line from top to bottom
NO, I WANT THE COMPRESSOR LINE ON THE BOTTOM SO THAT AT PRESSURE RELEASE MOST OF THE WATER WILL BE BLOWNED OUT OF THE CYLENDAR. Thanks for watching.
No offense, but I don't think you really understand how a desiccant like Molecular Seive or Silica Gel works. Both those materials actively absorb water and bind it until saturated, at which point it may as well not be there because it isn't going to absorb any more water. The only time you'll see liquid water is when the material cannot actively absorb any more so leaving the bottom end open to 'let it drain out' will not work - either the material is 100% saturated or (if not) it will continue absorbing water from the air until it is. It will not 'dry out' if left on its own, you have to use energy to drive off the water, such as heating to 350degC in an oven for 4-5 hours. Once dried it's good to go again. Molecular Seive is a bit more aggressive/faster than silica gel for absorbing water, and consequently requires more energy to force it to give up any water it has already absorbed. Don't ever leave it in an uncapped container for any length of time.
Aaron I hate you now another thing to buy. Going to buy a harbor freight $10.99 12x 18 wood rolling cart to move it outside to porch. 6x16 covered porch. Will be easy to mount the filte4 as the Yong heng measures 12 X 18 and will fit crossways .to crippled up to carry a 30 pound thing while using a walking stick.
Sounds like a good plan I think I am going to copy it. My compressor is on top of the washing machine and driving my wife crazy. A cart would allow me to put it away when not in use. Thanks for the idea. Best of luck.
over kill......even double filter over kill...it cool people trip on what they trip on.
If I can give advice based on real research that says this is a good practice for protecting your PCP then comments like yours have no merit. It funny how some people trip on notions derived from nothing except a baseless ideas. Thanks for watching.
@@aaroncantrell8819 I think he must have got some good weed, cause he be tripping