Video

Just checking back again. I hope all is well, I'm here in SW MI too. Btw My Dad went to Western, lost him 2 yrs ago @ 89.

They won't laugh when they are at the E.R. trust, they do just fine for home defense

Some felons can own a firearm, if it's non violent or not drug related. Most still can.

Hi, Comparing the KalibrGun gun to the FX impact 22 caliber and 25 caliber shooting pellets in terms of FPS, FPE and shot count how do they compare? For the FX impact FX advertises the 700 mm Barrel 25 caliber at 89 FPE. Using the same combination on your gun in terms of caliber and Barrel what would be the FPE compared to the FX? In terms of shot count my friend is getting about 70 to 80 shots using a 25 caliber, 32 grain slugs FX Impact 700 mm barrel at 950 FPS. Thank you

I haven't heard from you you still alive.

Is this channel shutdown? I miss Aaron

I think you are very personable and honest, and that you keep your prescribers in mind when explaining how you research and compare your airguns, scopes, and every part for an airgun before buying and how you are honest about what you research and how you find similar items and find out whether you can get a less expensive item that's as good as something more expensive and the reason for your choice, and it is apparent how much you enjoy what you do, thr excitement is contagious, SUBBED! Goimg to share your channel. God bless brother...

Thank you sir! Exactly what I needed to see!

Great 👍 video I've just recently got into pcp. I have 2 9mm hand guns but loving the pcp rifles

Thanks for video. Greatings from denmark😊

Aron how come you don't do videos no more we miss you buddy.

Got a new pressure gauge today from Gamo USA. Wrong size. It won't thread into the black receptacle. Outside dimension of threads of the new one is 9.61mm. The original gauge measures about .03mm smaller. I'm sending it back but does anyone know the actual size of the pressure gauge threads on the Urban?

Great for BB's too... I have a bag of my son's old T shirts for stuffing the box, works great, it's quiet and best of all it's just about free.😁👍

aaron i havent seen any of you in quiet a while and i am hoping you are doing ok

Any suggestions how to remove the inner brass piece (where the o-ring goes)? Mine is stuck. Rapping it on the table didn't work.

There coming for 2nd amendment 100%, So i won't be waiting till it's too late. I am researching the subject.

HI Aaron, have you seen the new Snowpeak T-rex bullpup? Is it merely renaming the P35? Do you anything about their new model?

Thanks for the info I'm gonna make one for my 457 big bore air rifle. I hope I have enough jeans 😂

Thank you Sir Just purchased one and great information and explanation

Very helpful video

Ken we want you to start making videos again my friend so please start making them with your awesome guns.

Great video, very helpful!!! 1 question... do they have tiny 1ns for like co2 pistols???

Are these reliable guns?

One year later and they have better air guns for that purpose. The m50 is a bolt action .45 caliber air pistol that has up to 200 fpe. And you can get an attachment that turns it into a pump action for quicker fire up shots. It is only $640 for the air gun however the pump action kit is another $155.

serendipity...thank you bro, I'm looking @ the same set on amazon...

Thanks for your Help and all your advice

Hey Aaron how's thing's my man 👌 Aaron I've been trying to get hold of the artemis p15 gauge removal tool for my p15 everywhere I've looked are out of stock and because ive got the smallest leak ever fron the gauge o ring it take's about 3 weeks for it to empty it self, I've even tryed to look for one i can make because there are people out the using the socket wrench just turning up side down unfortunately I've got one really close but not close enogh any chance you could help me or point me in the right direction please buddy all tbe best dave👍

Hope all is well Aaron. Let’s us know you’re ok!

These are great machines for the price. But being built to this price, they are constantly attempting thermal self destructtion. ;) Without cooling the air would get ~700°C in the high pressure side. This is why the O-Rings burn up there! Of course there is the water jacket, but it only can do so much.

Not sure how many P15 owners ended up with a broken or leaking popper valve. Well mine broke and getting a spare in Europe seems to be an issue ... I turned my own on some improper turning equipment but the tolerances I achieved are not good enough to get a nice enough seal to be able to pressurize again with the hand pump. Anyone know good aftermarket valve for this gun ?

Awesome video, I will keep this in my head for when it happens. Thanks

You never showed how you got the litte piece out with the O ring you changed? I took mine apart as you showed but can’t figure out how to get the piece out that has the O ring. And I don’t want to damage it

Thank you for your time and knowledge👍.

I have owned one for 7 years now. First time I have shot it in around 3 years and was holding air from 3 years ago. Perfect. Never had a single issue in all these years.

Hope you're doing okay Aaron!! ✌🏼

Hi ! Could you please write the names of these guns in the description or else? Thank you

Thx

The piece that goes on the casio doesnt actual fit over the ring does it, it fits against it right and the black tape secures them both together right? need help

Full auto c02 offerings and large caliber PCP offerings are the go to for home defense and being a felon. Crossbows are effective too.

I like your daisy no . 8

I have a 45 rattler air gun for home defense

Has something happened to Aaron?

Arron, I had to replace all of the o-rings in my Fx Bobcat Mk2 25 cal regulator. After about 6 years, good run.( I think their was 3 different sizes 6 total ). Just go ahead and replace all of them while you have it out so you don't have to go back and do it again like I did. I called fx and bought 2 of each for the regulator and 2 of the little 1/4" balls to keep pressure on my barrel all for $32/$35, 7/10 day wait on delivery. Then they told me they would fix it for $140, .00 plus $40.00 each way for shipping and 2 or 3 weeks before they could get to it. I learned that these o-rings were metric, so like you. I went to Harbor Freight and bought a big box of metric o-rings for $7.00 (300 + o-rings) and was able to find a match for all of them. I did the repairs the next morning after I watched acouple of vedios that afternoon. Tomcat Airguns was very helpful, Ernest Row from FX has a couple vedios. It took me a couple hours and actually had fun learning how to repair my own airgun. It did take 3 trys before I got the 140 psi set on the regulator after replacing the internal o-rings on the regulator. Ernest Row shows you where to take the measurements to make it easy to go back. I REPLACED THEM ABOUT YEAR AGO, Still holding..

Most firearms are WAY overkill for home defense. They are way too dangerous to shoot with members of your family close by, whom may or may not know what is going on. Most fir4arms can shoot threw 2x4s fairly easily and a 2v4 will barely slow down an AR15. A powerful airgun is much safer for the simple reason that whether you hit your target or not, you are less likely to have bullets flying all over your house endangering your family, probably more than the intruder himself!

Thanks for the video, Aaron. Would you choose the P35 or the Gamo Urban if the price difference wasn't an issue? Which is more accurate?

Have you ever tried to keep a pcp by your bedside until the next day and did the air stay in the bottle of your air gun?

After i got my first airgun recently, I so regretted throwing away old clothes or giving away to goodwill. Could have had 3 or 4 pellet traps.

Lewis and Clark carried 50cal air rifles with them into the wilderness ,knowing their gun powder could never get wet.

Hey Aaron where ya at brother? Pray everything is all good with ya man.

it takes about 30 seconds for the yong heng to fill my jts airacuda max from 1900 psi to 3000 my old dookie vevor compressor that broke took like 5 to 7 minutes