The Dozer Engine seized because the oil a lot was dirty / Engine Compelete Restoration
Vložit
- čas přidán 9. 04. 2024
- The dozer engine seized because the oil a lot was dirty / Engine Compelete Restoration
#dozer #engine #seized #oil #dirty #complete #restoration #building #repair #pakistan #mechanic #king
Well focused and dedicated guys working with a minimum in open areas with dirt like conditions. Hats off to them !
I'm surprised that thing was running at all.
Amazed that they took it apart with just basic hand tools, determination and know how.
Seriously impressed!!!!
Good job. These Pakistani mechanics are talented.
Really great job, to be honest! These guys are true mechanical heroes, by doing an extraordinary work with no proper equipment and some self-made tools!
Absolutely badass ! Big shoutout to the mechanics and the channel. Great fun to watch.
Much respect for these gentlemen. Enthusiastic, and their work ethic is second to none. We should be humbled by such people.
This is what I imagine when the Facebook marketplace ad says “rebuilt a few months ago, but no paperwork”
Dont buy it then go buy new
Is not question about it, these guys are master mechanic and they don't even know it, as so.many others from all around the world due that they have to rebuilt rather than buy a new one. Amazing job guys and girls.
How these guys can do what they do working under almost primitive conditions is Simply Amazing. No high-tech gadgetry for these ingenious fellows
Muscle 💪 power😮😢
Team work is the reason that this happened. Everyone understood their role. We Americans would have milk that for at least a week, especially if we're getting paid by the hour, but we'll also need a lot more tools and a bay with a overhead crane, a\c ,heat and schematic
These guys really show what determination and great teamwork can do. All this with nothing but hand tools. I also liked that even though every one of them was covered up to their elbows with oil, grease and dirt during the tear-down, they had all cleaned up to near spotless during the reassembly to avoid crap getting into the rebuild (even though their workbench is nothing but some wood blocks and a steel table sitting on dirt).
Where there is a will, there is a way. Especially, when there is no other option. Team work rules
Imagine what these guys could achieve with a fully equipped workshop, respect
Kudos to everyone of those men any of which is worth more than the overpaid diesel mechanics today.
Wow, gotta hand it to these guys, they know what they’re doing!
Estão de parabéns, esforço mútuo, empenho 👏👏👏👏👏👏👏👏
And we ban plastic straws yet these guys have to work in these conditions
Mñ
These guys are amazing, the amount of work they do and the skill they do it with is nothing short of incredible
Not a torque wrench in sight - just do it up till it feels kind of tight.....
Wow I’m impressed. You can do anything if you apply yourself.
Is 3 in the morning and I’m supposed to be sleeping but now after I l watched this video I believe I can get out there pull the motor out of my truck apart and put it back together it may not run but it I’ll be back together 😅😅
Авто сервис Игорёк --- качество не наш конёк
Very valuable video!!. Why they are not introducing " gas cut" to oil pan?
Kerja bagus 👍🏻👍🏻👍🏻
Kerjasama Team yg baik pasti hasilnya juga baik
Semoga semakin kompak dan sucses usahanya Aamin 🙏🏻
Dalam vidio ini pasti yang sangat lellah dalam bekerja cameramen nya nie 🤭😁 ⭐⭐⭐⭐⭐
Wont lie, I absolutely love these guys!
i hope there paid well. that's hard work and dangerous i do the same but in uk using all the modern stuff and safety
Big supporter, amazing to watch 3 days 24/7 stripped clean replace rebuild, turn key, ring client ready to go, pay me.
(Payment made) - next client
27:41 they made that ring compressor from an old cylinder ... that is genius ...
you guys are the BEST in the WORLD at this kind of work...GREATTTTTTTTTTTTTTTTTTTTTTT
Genialidad en su máxima expresion
Excellent job!
You can tell who 's the boss, the guy with the white shirt! He does all the fine installation, start the engine at the end, and enjoy washing the engine case too. 😎Team work, good job all involved.
great team work,, any of these guys would make 60 bucks an hour in the usa
I like the way the trucks are painted in rainbow colors and that the employees are allowed to wear dresses.🌈
Bloody amazing clever boys
Good ol hands and old tools never fails
Looks like a bunch upgraded to sneakers from sandals. God bless them.
Spirit and team work thats what i love. Lov❤from South Africa
Love how the dirt absorbs the oil.
Brilliant work
Talented undeniably but nothing torqued down to the correct tolerance and nothing seems to go back in the order it was removed. Rebuilt in filthy conditions. How long before it fails again? Fun to watch though
amazing safety gear and hardly any run-off polluting the water! 10/10
I am impressed.. I take my hat off to you guys!!!
Reminds me of Cubans, dont have the best, but output the best...incredibly talented. You learn skills beyond when in their situation.
ทำไมบังเก่งจังคัฟ🤔🤔🤔
That is one filthy engine - outside and inside!
But well done mechanics!
기적이다
놀라운기억력
فقط ينقصهم تأهيل المكان وإعداده لمثل هذا العمل
Industrial pajamas and sandals are top notch 👍
The poor wife who’s gotta wash those unies 😮😢 that’s the real unsung hero
Nice job👍
Looks like an NT855 Cummins
I'd recommend periodic oil changes.
They should start a go fund me page to purchase a torque wrench
Makes taking apart my 1939 Farmall Tractor seem simple.
Gracias a su video pude ver cómo es un motor de estas máquinas por dentro buen trabajo un lak
These guys are brave ,must exercise wer some worksuits
IN USA REBUILD PRICE 80K IN INDIA 1200$ who is laughing now
They often don’t even have a torque wrench so yeah it’s scary. Plus the gasket kit probably cost 500$ or more
They really stripped that engine to the bone. No special tools too.
Great job!. Although they're probably now 'off' Greta Thunbergs xmas card list!. 🤣
Bol lacks to her
So talented strong boys
God bless you
These guys are the real deal
They have a lot of trust in that tripod! 😮
We need to have a duet with this and the guys at JAMSI.
Excelente trabajo
Let’s see their workplace safety video.
This is why it's called "the third world"
Молодцы, все при деле, без перекуров,
Circumstance and needs based.
No such thing as OH&S out here, oil everywhere, then water, while all wearing flip flops.
Bloody unreal stuff, gotta hand it to them, that’s determination.
Saludos desde ARGENTINA,👍👍👍👍👍👍👍👍👍👍👍🇦🇷
Six cylinder in line diesel engine successfully rebuilded by these guys in a couple of hours final invoice after taxes probably u$100😊
Here in US same work probably two weeks of US labor final invoice u$ 15,000.00 + tax😅 for sure.
We have a lot to learn sometimes
Not an easy engine to overhaul.
good work boys a joy to watch
Then you buy this machine on the open market
Good job 👍🏻 👏 😮😢
Not a torque wrench in sight. Torque by feel. Amazed.
Un Buen video exelente Pero ceria Bueno si usarán mascarilla cuando ce usa La Gasolina ⛽ a precion 😮
Porque eles não limpam o motor antes de começar a desmonta-lo.
Bravo !
Those who have never tried will say that it can't be done. Those who have tried and fail will say it's impossible.
NHRA has nothing on these guys!
That brings back memories from the 1970s. Komatsu "borrowed" most of the D355 design from the Caterpillar D9G/H models. But the engine was a Cummins type design. If I recall correctly, Komatsu may have built that engine under license from Cummins.
Should we change the oil boys?
Naaah we'll just rebuild the engine.
😮
Cleaning engine fixes it?
not a torque wrench in sight!
RESPECT! 😎
wonder how many bolts were leftover in the end....
Back door slamming warranty ! Lol
Молодцы парни
Sem aplainar o cabeçote?
Pretty impressive. I could take it apart with no problem. Putting it all together may be a problem though.
Engineer Kelantan Malaysi🇲🇾🇲🇾🇲🇾 laughing seeing this video....
" sounds like it....!"
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
3 batteries used on a 24 Volt starter ????? In series its now 36 volt ---- enough to either burn the FIELD COILS or damage the armature --- or more severe both
Never see a torque wrench or a proper torque sequence I didn’t even see a head gasket
no trabajan sobre una mesa - un lugar muy sucio para armar un motor - en el suelo y mucha tierra
They must squat. It's their religion.
@@Skidderoperator gracias por esponder - no savia lo de la religion - cordial saludo amigo
@@luiscataudella8881 Gracias mi Amigo
Asi trabajan los verdaderos 😮😢 hombres
Engine too dirty inside
Not bad for a parking lot job though lol.
Diesels oil is always like this on old mechanical fuel pump engines. But, I would bet they didn't change the oil much.
Minions cha 😂👍
👏👏👏👏
If you don’t love their blatant disregard for ear protection you are not human
Молодцы как в России на поле разобрали и собрали😊
It looks like the engine is apart more than it is together. When your using your thumb for a dial indicator and tennis elbow pain for a torque wrench setting, it can only be a quality rebuild...
Not exactly OSHA compliant.