How To Install Brembo Brake Caliper Covers - Quick And Easy
Vložit
- čas přidán 29. 06. 2017
- How To Install Brembo Brake Caliper Covers - Quick And Easy
Here is what you need -
1. Flat Head Screwdriver
2. Tiger Seal
Here is what to do - remove the wheels first...
On the front just lift the wire holder with a flat head screwdriver and push into place ( yes it's that simple )
On the rear clean up the calliper with a wire brush and then clean away any grease using a brake and clutch cleaner - apply tiger seal onto the face of the calliper and inside the calliper cover that's going on - hold into place and leave for 24hrs to set.
DONE!
Where to buy them? - www.ebay.co.uk/...
---------------------------------------------------------------------------
YOU CAN ALSO FIND ME ON ...
EMAIL - FL4MEWITHA4@hotmaill.com
FUNKO FACEBOOK PAGE - bit.ly/35drFmK
TWITTER: bit.ly/2QCmSpA
FACEBOOK: bit.ly/39semCj
INSTAGRAM: bit.ly/2QcqHCT - Auta a dopravní prostředky
Hey everyone, I now have a new CZcams channel dedicated to car guides so please come over and show your support - czcams.com/channels/zlEuw17uBDs5HO1Wxb1yZg.html
Think how much money Ferrari could save everyone if they merely specified rust-colored calipers on their toys......
Must have some serious stopping power now on your bucket of rice
Let’s be honest, this video wasn’t recommended, you searched for it, and most probably thinking about getting those covers fitted on your car. So why the hypocrisy ? Great guide and nice results!
LOL i searched s65 calipers and these pieces of shits came up.. lmaooo
It actually came up while looking up a tutorial looking into painting my new Brembos.
Yes, except I don't have a car yet
I searched what the dumbest thing you can do to your brakes and found this video.
100%
I have a BMW motorcycle with Brembo brakes. I'm going to have to check when I get to make sure it's not a cover. Lol looks good man
For all of you complaining and talking shit ...Why don't you buy an original set of Brembos and it send it to him to satisfy your thoughts smh
I can't wait to install them on my Calipers on my Accord.
I'm waiting for the Lamborghini car cover that transforms my Honda into a elite supercar. Nobody will notice.
🤣🤣
Z Car it’s called c8
You can get one on Wish.com for a dollar
Z Car pinchie mekillo
You're the main man on this channel...🤣☝
Nice! Affordable, and look amazing. Not to bad when comparing them to the real ones. Honestly if u are not doing it for performance these are great just for the look it will give your car. I have blue on my car, and got them from eBay as well.
Rice
How do they hold up..
@@Lyfehurts66 They were ok but my calipers were to big, even though the seller guaranteed me that they were big enough. So after a couple of adjustments(high temperature silicone type adhesive) they look good on the wheels/rims, calipers give it a little more of a sport look.
@@atenra2436question have the glue hold up. If so what brand of glue did you used. Thanks in advance
@@truegrizzlesfan2292 I used a silicone glue from Walmart, check in automotive but make sure it's heat resistant. I forgot the brand but the Walmart employees in automotive will know what u are looking for. U are welcome in advance.
I cant trust nobody with brembo brakes now 😭😭
That’s a double negative
@@davidandrews5510 So what?
what is the best way to install these ? , i seen people gluing them or drilling them in , wich way is more effective im affraid that if glued they will come off eventually because of the heat.
Good video really interesting thinking of putting some on my mokka as the brake calipers are really rusty and have cleaned and painted them ..
Love how the faux transfer pipe on the cover's upside down.
Noobs will never know
@@Neauxluhnoobs won’t even know what brembos are. The only people who will notice these are enthusiasts, who will be instantly disappointed
These will go really well with the rolled up sock I keep down my pants. :)
Do they last with the heat the clalipers make?
Once again great guide, and thank you. I did notice something that doesn't really matter. But the nipple with the cap is actually supposed to be on top. You technically have it upside down. lol
Thomas Armour thanks for the info I corrected this after the video but never recorded that part 😊 also i have new ones coming real soon 😊👍🏻
@@FL4MEWITHA4 I tried to install mine today. They were too small. I tried modifying them but they still rubbed when I installed the wheel. Bummer. I made sure that they were compatible with my car by the eBay listing still would not fit I slid them underneath those clips like you did on yours. But the the other end that supposed to go over the caliper didn't work for me.
Thomas Armour I am sorry to hear this 😞 what was it that wouldn’t fit ?
@@FL4MEWITHA4 2019 Accord Sport 2.0t. something on the inside of the cover was pushing it out too far cuz I cut the top off almost completely to try to make it work and it still looked great just couldn't go down enough 2 alleviate wheel rub.
My honest opinion is these covers look great. I have owned the MGP, and CCi's(currently have). But these $12.00 ebay covers look better than the others and cost $235.00. less. I bought some ebay covers a few days ago. I'm going to use this method and I'm going to use round magnets on the inside with 3m tape on the inside of the cover for extra protection. Maybe even shoot the inside of the plastic with High Temp red paint. thanks for the video. I hope these work on my 2019 Accord Sport. The others are better quality materials, but they don't look as real as the ebay ones. Somebody needs to make these with aluminum and magnets like CCI uses. My 2 Cents
did it work out for you?
You could also just get a BBK like an intelligent being
They are made out of brittle plastic so that if they fall of, they will just shatter and not cause damage to wheel or wreck
I have brembos already but i wouldn’t mind re-painting these covers and put em on there . So much brake dust these covers might reduce it
Jon Ayhan why would you “repaint” brand new covers? Just put them on, no?
I have a 2013 audi q7 prestige do I check the brake sizes first
What type of glue/seal needs to be used? Tiger Seal is not something I cant buy where I live. Brake pads can get extremely hot and I dont know what type of proper glue can be used to make sure it doesnt come off. Any tips, appreciated and thanks for your video :)
Probably engine gasket glue will do
Can I install a caliper cover over my brembos?
Why not give it a go 😂🔥
Any troubles with the caliper cover coming off?
u make to small holes in cover and in caliper and screw them in for more security
Is tiger seal high temp proof ? Is it just a basic sikkaflex 227 grade or ?
No issues with overheating/ melting of the calliper cover?
These are made of plastic rite ? heating of brakes wont be a problem ?
Yes and no 🔥
Will this fit for audi q7 2016 s line model
Perfect mod for all Taco Bell and McDonald employee ricers
quick, easy and cheap way to make your car look better
@@huseyinklc5924 of course. This looks cool on all cars. I am personaly JDM guy, but this would go very good on some nice Shelby, for example or maybie... Ford Mustang. It would be very nice on it. I buying car for few mounths, it will be Honda or Nissan, and i will set this things for sure
@@huseyinklc5924 And kill the brakes.
Is it worthy to install.. Bcz wheels are really hot in ling drive.. So how is the result?
Will this fit a Dodge Challenger sxt soice they are universal cover?
Great video thank you
It's not damage install it? Because it can fall Or cause the brakes to heat up.
Hey, how about a temperature from brake? plastic covers not melting?
Nope all good still to this day 😁
Can someone tell me where I can get some to fit VW T5.
What size of rotor and what size of cover
Does this effect braking performance ? Just curious 😄 I mean does this reduce heat dissipation ?
All good 👍🏻
Hi. Did you have a problem when it is too hot by doing this way on the front wheels? I am asking if the brembo covers are melting without silicone @@FL4MEWITHA4
All the Brembo caliper covers r the same? I am looking for one atm for my 05 Camry as well.
Universal 😁🔥👍🏻
My car has actual Brembo brakes and I’ve worked on them. Why did this 3rd party messed up on the bleeder valve. They go on top, not the bottom.
Nice Job !
Good video, well done 👍
Will this fit a 17 RX 350 F sport?
What material is this cover? Plastic or metal?
Plastic 👍🏻🔥
That slick I don't know that one 😉
Does it fits in all cars i have 2012 toyota camry
He is dead.rip
what if you dont have that bar ??
Anyone know what covers will for a 98 Audi A4?! Thanks
Would these fit ok on a Lexus is250 2007?
Majid Hussain hi Majid have you tried ? I have the same question!
@@truthteller2937 Same here
I've got a 2017 and the calipers look crappy already, not even a chrome finish left. I'm thinking about a cover like this because it'll be easier than painting lol
Universal 👍🏻😁
Yes !! Beats painting, taping,😀
I’ll put these on my GT, most of y’all talking but ain’t even got a car🤣
how would you know that some of them ain't got a car,what GT you have
@@philipbahia924 17
I have a Nissan Maxima 2002, do u think these would fit without any cutting?
These are universal so you would need to alter them in some way 😁
Does anyone know if they fit a 2018 Infiniti Q50 luxe ?
Ford Eco sport ST-Line 2019?
I could do this just don’t have the tools to take wheel off , would a garage charge much or would it even be better for me to take it to a private tyre place , there is a man I get to change my tyres
Great Video!
Thank you
will it fit on brakes that went brembo?
Nice video bro
Many thanks
Can I still replace my brakepads? Or is that impossible this way?
Only attached to the carrier so yes 👍🏻🔥
Replace before glueing so at least you have it for sometime lol
Just if you have a caliper that has a perfect form for the cover
I have changed to Brembo discs and pads in the front, but the pads do not fit perfectly and they rattle as they,are a tad to big. Do you know about any clips to put in between?
I wish you had shown a close up of the clips before you put the covers on… or at least pointed them out better… I have a 2010 BMW E60 with slotted and drilled StopTech rotors front and rear… I got the light blue covers (white car/black 20” wheels). it should look awesome but I’m nervous about putting them on… I got the biggest they offered and mine came with hose clamps and tabs so they are different but technically these are all the same… would you mind contacting me about this… I need help… thx
is it true that we sould not use plastic calipers because it melts from brake heat?
You can see when I made this video and I still have them on my car and brake calipers don't heat up only the pads do 👍🏻🔥
@@FL4MEWITHA4 thank you👍
Also I have 2015 Hyundai Veloster turbo
the car in the video its an audi a4?
I have a 2011 BMW 335i Msport convertible! How much for a set?
$140
That shit cost 20 dollars on eBay nigga said 140
I bought mine for 12 dollars on ebay. I havn't installed them yet. Since I have a pair of more spendy ones. But these look better. I don't want to use glue. So I'm tryin to figure out a way to use magnets instead.
Fk off puttin them on any car..r u mental
We’re did you find them
eBay 😁👍🏻🔥
Wait there was just a glitch in the matrix...instant Brembo brakes? 😵💥🔫
😁
most instances it will not fit to the ones that your car has. Standard calipers covers comes with extended clip and hardware. I just receive ones that I ordered and I'm searching for how the hell I will fit these on thats why I ended up here.
Do they fit on most cars? Volvo XC70? Where do you buy them??
J A S P E R eBay and yes 🔥
Where could i get the right ones for a scirocco 2011 2.0tdi?
eBay is the best place - find the link in the description :)
At least you got real brembo pads or....
where can i get them?
Hi flame; i would like to immitate what you did, up until now are your calipers still intact?^^
They are very well in tact and still look great, in a few months time I will make another video called, 1 year later to show the wear and condition of the breaks from install up until now 👍🏻
@@FL4MEWITHA4 Did they hold up well? I'm still trying to figure out a magnet option for the rear covers vs the tiger glue. I'm thinking of getting some molding clay to see exactly where the cover sits against the rear caliper so I can attach the magnets in the correct spots. Just another 20 bucks on clay and magnets. I'm not even sure my covers will fit yet. They said correct size for my car. But the fronts seem a tad small compared to my current covers.
Thomas Armour yes still all good 👍🏻 let me know how you get on ? 😊🔥
will these fit an Acura tl 2011
Maybe 👍🏻
Please guys don’t do this it’s so easy to tell they are fake i saw some guy with these I shed a tear laughing so hard
I wouldn't really care what other men think LMAO. 🏳️🌈
Idgaf what somebody with no car thinks🤣
Thanks for showing us how to install them upside down.
Gasoline Images Inc. lol you must have your device upside down 🙈 you couldn’t put them on any other way 😂
On real calipers of any kind, brake bleeders are always at the top. The need to be up top to purge air out of the lines. You have the simulated ones facing down. You have the passenger side on the driver's side and vice versa, hence them being upside down.
I think he's got you here. The bleeder screws are on top. It's OK people who recognize the bleeder screw is in the wrong spot probably will already know it's a fake Brembo before they even think about the screws lol
If I glue them, then when I have to change brake pads, should I remove them?
jin5632 you shouldn’t need to do that as they should be glued to the part that slides off 👍🏻
I have a 2015 Volkswagen CC are these universal?
They are universal but worth asking if they fit your vehicle before buying.
Is This for any car? Would it fit a 2019 Honda Civic hatch
They are on Ebay as universal, but I would check with the seller on Ebay 😁🔥
Bro, belive, it would. As JDM car guy, i am sure it will be nice on 2019 Honda. Just one question, is that Honda Civic VR5?
If it is, i am not sure for size... better check somewhere else in car store or at internet. Cheers 😉
Can you send the link
I recommend to pay the caliper the same color of thw caliper cover to mahe it look better
Where did you get the covers at? Want to cover my hellcat brembos with red instead of the stock black
I don't know if you did this already but they do not fit like they should go directly through Mopar and get the proper fitting ones for your Hellcat I did there were about $240 for the set of 4 well worth the money
Ebay
Well… you would notice, a bleeding nipple is always UP.
so even if i dnt put a glue it will be safe?
joseph nicolan - if you don't have the clips you need to glue it on 👍🏻 pushing them on without being secured will be dangerous as they can fall into the moving wheel 😁🔥
The little bleed nipple should go at the top of the calliper.
Rice. Thee end.
You need to show more than the last 5 seconds of the installation process
It's like they're made for those calipers, what if you have different calipers? the glue I guess...
They are universal 😁🔥
How about when you want to change raer brake shoes?
Hi can i do same on a4 b9?
Yes, eBay
Well I guess as tacky as these are when you find out they are false LOL there are definitely cars that these look real on.
I have a nissan g35 sedan. Is that kind of caliver can be fit to mine? I'm about to order in ebay if it fits. Thanks
michael decena should be fine - you may need to cut a little plastic 👍🏻
Great video... I think I might have the same ‘front’ Calipers on my Audi Q3 - (approx 210mm in length). I ordered the same Calipers Covers in Medium (240mm Front) and Small (190mm Rear). I thought the 280mm Large would be too big. We’re your ‘Fronts & Rears’ also 240mm and 190mm? Cheers.
Is like to know the answer. I ordered the medium and small size too. Haven't arrived yet. Hope I got the right size. I know I'm a year late lol
@@xicelinkx Just did the same thing 5 mins ago lol. Mine's a 2011 BMW 328i, hoping the medium + small combo would fit perfectly.
Is that a Volkswagen jetta or bora?
Saul Diazbarriga golf mk5
How long would the tiger seal last?
A very long time, mine are still on and no signs of peeling or cracking 👍🏻🔥
Are they plastic?
SwimAndy- yes they are 😊👍🏻
Is there any possibility to fall off while driving. Will the glue keeps it firm even water gets inside
kavishwara kavinda the callipers don’t get hot only the pads and disc - if you make sure the surface is clean and dry with a nice key for it to stick - then there is no reason for it to fall off 👍🏻
FL4ME WITH A 4 I fixed it after watching your video. It came perfectly. Thank you
kavishwara kavinda excellent- I’m glad I could help 🔥
this can be removed? this can damaged the pads or something? btw look awsome but need hear if are they safe or not to install
Jose Caraballo mine are still going well and no accidents 👍🏻 so I would say you are all good to go
are they plastic??
dest151 yes 😊👍🏻
@@FL4MEWITHA4 thank you sir
Comment trouver la bonne taille sur temu ? S m or l ?
Wouldnt the heat melt that shit? A serious question
Not every caliper design like this....mine different design...so cannot clip it as easy as this video...
Why...plus you have them on the wrong side. The bleeder needs to be facing up. At least try to make it look right. SMH👎
how do you know which size to order
Paul Wilson anyone know ??
To me is pointless to add brembo brakes to a car if it's not already on it... In my opinion it's all just for a look anyway how fast can you really be going to where you need to use larger brakes LOL save yourself the money it's all just a look
If you don’t have a car with real power or do things that require good braking then yeah your right. But If your car is anything above 500+ HP and your going over 125+ mph on a drag strip repeatedly or even doing laps on a track. A big brake kit like a brembo, wildwood, etc ..is important. Stock brakes will warp, crack or even melt because they can’t handle that type of abuse and heat.