yes, thank you for the detailed and easy to understand video. This helped a lot. I also damadged the FPC connector that hides the battery connector. To fix that was an even bigger pain in the ass. Unfortunately my cartrige slot refuses to work since then wich makes stock nand a bit obsolete. I think it got damadged when I soldered the +3,3V but I could not find out where exactly. So I leave it as it is!
I was onboard with this up until you started soldering to surface-mount components. I think I'll actually find a professional to do it for me :D Thanks for the amazing tutorial, though!
Okayyyy this looks pretty easy. I have some knowledge about soldering because I took an Electrical class back in grade 9. I think I could do this. Just waiting for my modchip. I would also be modding my Switch OLED but I’m scared about that. It looked so much more complicated
I’m having trouble soldering the points I’ve done the OLed switch fine, I keep burning the solder point off the flex cable if you don’t mind me asking what heat is good for 60/40?
Usually 680 is good if you’re using low temp solder but you can go up to 700 just be careful. If you’re burning the flex cables then it’s definitely too hot.
Can anyone provide a guide that tells you what you are doing? I have everything ready to go but what's the point of I don't know what the point of installing the cable reset point is for as well as if I need to do anything to the chip as far as loading firmware/software or if it's just supposed to work out the box
Quick question for you or anyone with knowledge, when you solder point D with the two pads (and A) you only solder one, the left. Is this intentional? Just curious if only the left side needs soldered to the flex cable?
@@Lojalny Wow that so cool... You've got an hawk's eye and a surgeon's hand lol. Where are you from though ? And what's your major ? How long did it take you to get this perfect with performing surgeries on tech ? It's all so fascinating... I'd love to hear from you.
@lojalny4782 bro if you want to that would be awesome but nah I believe you that's just Hella impressive to me I've been doin hard mods on handheld for like 5 years and I don't think I've actually ever done but without a lens
Hi, when i start up my Switch Lite, the LED on the Chip turns blue for a moment, then green and then blinks green a coupe of times. Switch boots up to normal OFW. Flashed the Chip to fw2.73.uf2 before the installation of the Chip. On the github page it says that after fw2.70 the Error Codes have changed. But they dont mention green LED Codes. What could be the Issue now? 🤷🏻♂️
@@Wayayeo what happens when I solder everything and the led lights up and the Nintendo turns on but the screen is black . Happened to me after resoldering the flex cable because I flipped the right side of it the wrong way .
The soldering was crazy hard, but thank you so much for making this tutorial! I got it all in and working thanks to your video :)
Glad it helped!
Curious, have you used a microscope for this? Or have you done it YOLO mode?
This is the best video on this. Thanks, time to get myself a cheap switch lite
yes, thank you for the detailed and easy to understand video. This helped a lot. I also damadged the FPC connector that hides the battery connector. To fix that was an even bigger pain in the ass. Unfortunately my cartrige slot refuses to work since then wich makes stock nand a bit obsolete.
I think it got damadged when I soldered the +3,3V but I could not find out where exactly. So I leave it as it is!
Glad the video helped. Check with multimeter fir any bridged connections or shorts. Hopefully you can identify the problem.
This is the best video I ever seen for this.. Thanks Very Much for sharing..
fot those that do that, know that is not that simple, but u make it look that way... very good
I was onboard with this up until you started soldering to surface-mount components. I think I'll actually find a professional to do it for me :D
Thanks for the amazing tutorial, though!
Isn’t that how you’re supposed to do it though?
As long as its fluxed and you don't go burning everything around it, then you're good.
@@giangiang Eh, I need to not be lazy and buy myself proper flux. I've been soldering drones and a basic flux pen was enough.
What's the name of those bended pin you use it's seems very convenient
Thank you very much!!
Hello, is this chip the same for every switch lite ? And where did you buy it ?
Okayyyy this looks pretty easy. I have some knowledge about soldering because I took an Electrical class back in grade 9. I think I could do this. Just waiting for my modchip. I would also be modding my Switch OLED but I’m scared about that. It looked so much more complicated
Did you do it ?
what soldering station do u use?
Great guide and soldering skills but my god, why reuse the same, old thermal paste? 😮
Thank you for your comments. We use quality thermal paste we’ve been using for many years with absolutely no issues.
I’m having trouble soldering the points I’ve done the OLed switch fine, I keep burning the solder point off the flex cable if you don’t mind me asking what heat is good for 60/40?
Usually 680 is good if you’re using low temp solder but you can go up to 700 just be careful. If you’re burning the flex cables then it’s definitely too hot.
The cpu flex cable need to be solder at the capacitor?
It seems the soldering is not easy..
I have only blue led when I start my switch . Do you ah e idea ? Maybe bad firmware ?
Where do you have to test with a multimeter?
Do you have à diagram or photo for what your done please
Is that alcohol that you're putting before soldering?
Thats flux but you can also use alcohol as replacement but make it dry.
Guy good. I from Brazil. 😊👍
I'm from Polldollah.
Can anyone provide a guide that tells you what you are doing? I have everything ready to go but what's the point of I don't know what the point of installing the cable reset point is for as well as if I need to do anything to the chip as far as loading firmware/software or if it's just supposed to work out the box
Yeah thats basically the answer
12:38 I Don't have a double face side tape. Can I just add screw on it ?
Quick question for you or anyone with knowledge, when you solder point D with the two pads (and A) you only solder one, the left. Is this intentional? Just curious if only the left side needs soldered to the flex cable?
You can solder both of them or either one, it doesn't really matter.
I can see your cursor. How did you get a cursor on your camera?!
it's probably a screen recording of the camera software
Just wanna say the mouse was in the middle of the screen
Where can I buy the Hwfly Lite v6?
I Did it without microscope and lens ✌️
You are just built different congrats fr tho
@@Diswarrecords thx
@@Lojalny Wow that so cool... You've got an hawk's eye and a surgeon's hand lol. Where are you from though ? And what's your major ? How long did it take you to get this perfect with performing surgeries on tech ? It's all so fascinating... I'd love to hear from you.
I can show on video my work if you dont believe 😅
@lojalny4782 bro if you want to that would be awesome but nah I believe you that's just Hella impressive to me I've been doin hard mods on handheld for like 5 years and I don't think I've actually ever done but without a lens
Can I microwave my Flux? Because I ordered one from amazon and it came hard. It’s not watery like yours. It’s kind of like a Jell texture.
I have flux like that as well. I just use a toothpick to put it in place and let it get hot
Would I still be able to change the shell of my switch lite if I install a mod chip? I like to change up my shell and buttons every few months 😅
You need a join a mental hospital 🤣
Of course.
There are so many versions is this the Upgradable Flashable Hwfly Lite D V6 Core Chip Rp2040? Trying to find proper vid thanks!
it installs the same way as the original HWFLY exact same cables just a different chip
@@shanebaker7364 Ah OK thank you!
Hi, when i start up my Switch Lite, the LED on the Chip turns blue for a moment, then green and then blinks green a coupe of times. Switch boots up to normal OFW. Flashed the Chip to fw2.73.uf2 before the installation of the Chip. On the github page it says that after fw2.70 the Error Codes have changed. But they dont mention green LED Codes.
What could be the Issue now? 🤷🏻♂️
Sounds like a soldering issue. Check your connections with multimeter.
You in the USA bro.. I need you to chip my switch
Wayayeo.org. USA based yes.
my flex cable allows me to solder the 3v but theres no copper on the flex to solder the ground pin to the capacitor. will that be a problem?
it worked? I have the same and i dont know what to do?
@michaelv.4392 ?
So where do we find what to do after the chip is installed . Like the process after that with the sd card. ??
There’s lots of CZcams vids on how to do this. Simply search for how to install “hekate”. Good luck 👍
@@Wayayeo what happens when I solder everything and the led lights up and the Nintendo turns on but the screen is black . Happened to me after resoldering the flex cable because I flipped the right side of it the wrong way .
Do, I need to reflash this chip before I solder it or no need?
Up
Up
You can upgrade the chip without open the console
Depends on you bro you can reflash it or update it through sd card
Tried that, unfortunately I can't make the solder stick to the board.
Use leaded solder and flux. Good luck.
Can i perform the operation without magnifying glasses ?
You probably can. But a microscope is highly recommended.
was it water before he used the metal
That was flux
how much do you chanrge if I send you my lite and the mod chip to install.
Hello. Visit our site at Wayayeo.org if you have any questions feel free to use our contact form or give us a call.
how i can download schematic of switch lite chip
Qual a versão do hwfly? V4.1??
That modchip is Hwfly (RP2040) Raspberry pie version.
@@wing7541no its Not rasperry pie Version its the Normal
Can i have link to buy the Hw fly module ?
Official hwfly chip (on google)
Is this rp2040?
yes
Ok who can i pay to do this to my oled model? No BS!!!
I tried to do it and now my switch has blue light dead 😂
no pretin ????? what???
10:15 What, in the name of all that is holy, is that thermal paste splatter of mess?
"PromoSM"