Warren, you know when you pull out too many drawers on a toolbox, it will tip over. If you pull too many drawers out, will your truck tip over. Just some light humor 😂🎉👍👍👍
Watching from north east Scotland...you are some guy..keep up the good work...a real genuine working fella..give us a call if you ever have time to visit these parts.
That’s right about nuts and bolts finding the oil bucket 9 out of 10 time. I swear 9 out of ten time they’ll bounce off the end of your foot and under the bench or ten feet away. 😂
Hey Warren, busy day on the farms! I’m surprised that someone from the farm doesn’t come to see what you have done so they can see that it works! Great job getting all that equipment running. Thanks much for the video. Have a great day my friend!
Thank you, Warren. I reckon you could make watching paint dry entertaining? I really don't think any potential helper/apprentice would have the fortitude to do what you do. Field mechanic on the variety of stuff you work on in the conditions you work in and the improvised solutions you come up with, I think you must be one of the best in the country?
I know you’re a busy family but one of the best videos that I would love to see is story time with Warren. Even include the wife if she would agree. Just chilling under a shade tree sipping your drink. Members only though. Might bring in some more members
Warren , you have the touch on those squeezes and pulling the fuses could have made a better connection on the case , don't know but you fixed it with the magic touch again , thanks for taking us along on your mission .
Hi from Australia. The best I've found for those coach bolts is a plastic clip removing tool. They are flat with a slot so get in under the whole nut. Love the straight talk and the videos in general
Awesome video thanks for your time and consideration Warren very much appreciated top job top guy stay safe out there buddy regards from England 🇬🇧🇺🇲🚛🚜🚛🚜
I might have missed it, but I say this with love. I hope that header was supported somehow mechanically because I didn't see any jack stands or wood stumps under it. Don't want anything silly happening to our favorite mobile wrench!!!
Another Great Video, Warren. Sometimes it’s nice going from call to call fixing stuff and other times it’s nice to just have a longer job. Congratulations on your daughter’s graduation. Thanks for the videos.
The following someone around and having to straighten out problems caused by them is probably the most aggravating thing I can think of. Thanks for the ride along Warren, appreciate the video, enjoyed watching.
Always knew you were special and could lay hands on equipment!! Glad things are working together and you found the leak and all that. Good for you. Could you be any busier?? All the best from Surrey BC Canada
Great video Warren service calls with priority thanks for sharing always enjoy watching you troubleshoot these pieces of equipment. Looking forward to your next video stay safe Warren.
Looks like you have the magic touch on that case tractor 👍👍👍 Looks like you are getting through the jobs . You do seem to get all sorts of jobs to do .keeps you on the ball 👍👍👍👍👍👍
Warren, I found plastic funnel, strainer that fits right over the lip of a five gallon bucket that you can use to catch falling bolts, washers, and anything else that I, like you, always seemed to drop. Bill Congrats on your daughters success.
Congrats of ur daughtrs graduation..these days its not easy..thanks for sharing your trblshtng skills..its appears easy after you explain how it was done...I've been burned a few times trusting othrs todo the same quality work...its easier just todo it urself..that way you know how its done..GOD bless
I don't believe she graduated from vet school. That's her next goal to get into a veterinary school from what i understood. I would imagine it is prerequisite courses she has passed to get into vet school.
They say variety is the spice of life, so you're life must be pretty spicy. Can't afford to join the membership, but I enjoy the hell out of your videos and I can give you a thumbs up. You are one hell of a mechanic, of course you don't need me to tell you that, but there it is.👍
hey bud , komatsu used almost identical denso pump . one test we had was to unplug the PCVs one at a time and attempt start . usually start up on one with a little cranking and even run some . just thot from memory i spent a summer chasing one dozer for multiple troubles , pump , injectors (2x) before my screaming got fuel sample ; part cleaner , gas , junk ; union wanted a CAT . 😮😅
That's what happens when you have to hire people to run your equipment. Some operators are top notch and then there are those who couldn't care less who want big wages but don't look after the machines they run.
Hello Warren Quick question How hot is the weather where you're at ??? And how do you like that icon Ratchet ?? I'm surprised you're not using a slap on one......
To me John Deere equipment has always felt like it was built by engineers who constantly forgot something and had to fudge it into the plan they already had going afterwards Belts ,pulleys, funny brackets, gear boxes stamped out of tin and permanently sealed bearings that only last 1 year because they realized where they put it you can’t get grease to it. Just not a fan of JD. Compared to real industrial equipment they look like a 4th grader designed them for 3 graders.
Warren, your video's are very informative and interesting, and I have enjoyed ememsely watching them. I also want to Thank You for your service to our country, I also like listing to your rantings. However your recent change to a members monthly subscription, I find that highly disagreeable, that is big corporate america type tactics which I know we both disasgree with, I would much rather donate to a few $'s to have the previledge of watching your videos. I not going to give Google UTube my credit card number so that they can take out monthly fees. NIX that idea,no, no, no, no. Abselutly not. Aloha.........................
The work you do has your name on it so to speak, if you have someone working for you that screws-up your name is on it then your reputation gets a bad name so I understand your way of thinking
With the labor short coming, it’s a possibility to put an apprentice on, train them up the way you want. At least then there is no expectation for them to be competent.
Why do you think that makes any difference? I've seen lots of a-holes over 25 years old. Work ethic and honesty is a part of how you were raised. It sure as hell doesn't change with age.
what about hiring a helping hand? grab tools and help carry heavy shit, you have time to bring your dogs and video your jobs, I do believe you have the ability to hire someone to help with everyday tasks, get rid of youtube if you have to, i enjoy your videos for sure, thats a fact. Unless youtube is paying you a ton of money, pay to hire a helping hand and make your jobs easier, to me that makes sense, digital world doesnt fix your tasks. Just my opinion, I am open to comments as its just my opinion. Hope everyone is having a great day
Too many want big wages for not much in skills. A helper, as you suggest, would spend most of their time watching and how can he justify paying for that? Then, if he took on an apprentice, he already talked about those pitfalls.
Couldn't go to sleep knowing there was some Knowledge waiting for me. Thanks Warren, your the best.
Sir you are a breath of fresh air. A man with morals and a great work ethic. You’re a true patriot. Thanks for sharing your story
I never have liked things that mysteriously fix themselves Warren. Best Wishes to You and Your Family.
Warren, you know when you pull out too many drawers on a toolbox, it will tip over. If you pull too many drawers out, will your truck tip over. Just some light humor 😂🎉👍👍👍
Warren your videos are making America great again/warren 2024
I got you those AR-15 Leatherman pliers. I'm glad you love them.
Watching from north east Scotland...you are some guy..keep up the good work...a real genuine working fella..give us a call if you ever have time to visit these parts.
Looks a little different over here across the pond... huh?? Probably better weather where you are though.😂
It's not luck, it's an experienced guy being right 95% of the time. Good Job.
Thanks Warren, love your quick diagnosis, and getter done attitude.
You just made a Chuck Norris on that CASE. It was scared to death when you entered the cabin 😂
Thanks for taking us along ! Fun to watch a mechanic that works on everything including P.O.S pac cars
These days you can't leave the house without a laptop.
That’s right about nuts and bolts finding the oil bucket 9 out of 10 time. I swear 9 out of ten time they’ll bounce off the end of your foot and under the bench or ten feet away. 😂
Thank you for the video Warren 👍.
Hey Warren, busy day on the farms! I’m surprised that someone from the farm doesn’t come to see what you have done so they can see that it works! Great job getting all that equipment running. Thanks much for the video. Have a great day my friend!
Hi Warren. Kindest regards,Bill 🇨🇦🇨🇦
Thank you, Warren. I reckon you could make watching paint dry entertaining?
I really don't think any potential helper/apprentice would have the fortitude to do what you do. Field mechanic on the variety of stuff you work on in the conditions you work in and the improvised solutions you come up with, I think you must be one of the best in the country?
Thanks for the vidya. I'll have to watch it later. Thank you
Howdy 🤠 from the Northwoods of Minnesota. You do excellent troubleshooting
Unless you can find a smart, reliable guy. One that should already have their own business.
Thanks Warren! always enjoy your videos!
I know you’re a busy family but one of the best videos that I would love to see is story time with Warren. Even include the wife if she would agree. Just chilling under a shade tree sipping your drink. Members only though. Might bring in some more members
Warren , you have the touch on those squeezes and pulling the fuses could have made a better connection on the case , don't know but you fixed it with the magic touch again , thanks for taking us along on your mission .
Hi from Australia. The best I've found for those coach bolts is a plastic clip removing tool. They are flat with a slot so get in under the whole nut. Love the straight talk and the videos in general
Awesome video thanks for your time and consideration Warren very much appreciated top job top guy stay safe out there buddy regards from England 🇬🇧🇺🇲🚛🚜🚛🚜
I might have missed it, but I say this with love. I hope that header was supported somehow mechanically because I didn't see any jack stands or wood stumps under it.
Don't want anything silly happening to our favorite mobile wrench!!!
Love watching you figure out so many varied problem
Another Great Video, Warren. Sometimes it’s nice going from call to call fixing stuff and other times it’s nice to just have a longer job. Congratulations on your daughter’s graduation. Thanks for the videos.
The following someone around and having to straighten out problems caused by them is probably the most aggravating thing I can think of. Thanks for the ride along Warren, appreciate the video, enjoyed watching.
Always knew you were special and could lay hands on equipment!! Glad things are working together and you found the leak and all that. Good for you. Could you be any busier?? All the best from Surrey BC Canada
Great video Warren service calls with priority thanks for sharing always enjoy watching you troubleshoot these pieces of equipment. Looking forward to your next video stay safe Warren.
Stay on your own. There’s no one to have in the Uk and it must be the same in the US ….just causes aggravation
Do everything yourself. That way you know exactly how and what is done. I virtually trust NO ONE!!!!! You are the best I have ever seen.
Looks like you have the magic touch on that case tractor 👍👍👍
Looks like you are getting through the jobs .
You do seem to get all sorts of jobs to do .keeps you on the ball 👍👍👍👍👍👍
Great to see you fixing more broke down stuff.love seeing your videos too
That was a clean sweep. BAM BAM BAM and on to the next one.
Congratulations,. to you and your daughter. Lucky smucky, you are just good.
Definitely a variety of jobs keeping you busy Warren thanks for videoing them for us
Another work of excellence out the door!
As always, thanks for doing another interesting problem solving video for us.
Warren, I found plastic funnel, strainer that fits right over the lip of a five gallon bucket that you can use to catch falling bolts, washers, and anything else that I, like you, always seemed to drop. Bill Congrats on your daughters success.
Congratulations on your daughter graduating!!!
Congrats of ur daughtrs graduation..these days its not easy..thanks for sharing your trblshtng skills..its appears easy after you explain how it was done...I've been burned a few times trusting othrs todo the same quality work...its easier just todo it urself..that way you know how its done..GOD bless
Good job warren congratulations on your daughter graduating from veterinary school keep going on your great teacher
I don't believe she graduated from vet school. That's her next goal to get into a veterinary school from what i understood. I would imagine it is prerequisite courses she has passed to get into vet school.
You’re a badass buddy keep doin what ya do! Stay safe!
Ah, another day of putting out fires. Nice jib Warren. Looking forward to the next video
I was screaming at you about that fuse panel cover but did you listen? Nooooooooooooooo!!
They say variety is the spice of life, so you're life must be pretty spicy. Can't afford to join the membership, but I enjoy the hell out of your videos and I can give you a thumbs up. You are one hell of a mechanic, of course you don't need me to tell you that, but there it is.👍
Thanks warren great content , keep safe 🍀
Your the best boss. Keep up the good work.
👍👍👍👍👍👍👍
The laws of supply and demand apply. Too much demand, too little supply, raise prices. No demand, lower prices.
You ARE RIGHT DO WHAT YOU CAN WORKE BY YOURSELF
Feel yr pain. Not easy finding good help.
Wow your windscreen is crystal 👍
You scraped the fuse blades clean by extracting and installing? What a great video.
Ik werk ook alleen ook zeggen ze vaak dat ik iemand moet aan nemen maar ja sorry da kan ik ni weer bedankt voor de video super kerel ben je
Pretty sure it means FJB.
Thank you.
hey bud , komatsu used almost identical denso pump . one test we had was to unplug the PCVs one at a time and attempt start . usually start up on one with a little cranking and even run some . just thot from memory i spent a summer chasing one dozer for multiple troubles , pump , injectors (2x) before my screaming got fuel sample ; part cleaner , gas , junk ; union wanted a CAT . 😮😅
Great video Warren gotta the members only videos!
Thanks Warren.
Probably bad contacts in shuttle lever
Congratulations y'all on the graduation
Thanks warren
Dirty switch contacts if it has been standing for a while
Had my account info stolen so I had to stop my membership. I will rejoin once I get my stuff figured out
A lot of that shit going on.
Congratulations on your daughter graduating from OSU.
Hot dam a video ! They sell hay or run cattle ? Swather is a high dollar machine
I don't think there are any low dollar machines on the farm these days.
And the Master Classes continue. Thanks.
Awesome 😎 😊😊
Got er done! 😊
A big old speaker magnet is handy to have when you lose something small and metal in a pile of weeds or dirt. (I'm sure you already know though)
Also did you charge them for the shuttle tractor problem being you don't know what you did? Just curious
With this econmy its hard ti hire anyone especially in California ware you have to pay minimum wage witch is i think 20.00 an hour.
“Make hay….” Warren!
Could be one of those fuses you pulled wasn't making good contact!
Those people don't look after their kit very well, thats why their stuff screws up. Warren is the hardest worker on CZcams
That's what happens when you have to hire people to run your equipment. Some operators are top notch and then there are those who couldn't care less who want big wages but don't look after the machines they run.
Wiping off some grease shows professionalism.
Did you make your daughter’s graduation on time? Congrats to her and success in what ever she does in the future.
Hello Warren Quick question
How hot is the weather where you're at ???
And how do you like that icon Ratchet ??
I'm surprised you're not using a slap on one......
You probably knocked the dirt from the shuttle control linkage and/or switch.
To me John Deere equipment has always felt like it was built by engineers who constantly forgot something and had to fudge it into the plan they already had going afterwards Belts ,pulleys, funny brackets, gear boxes stamped out of tin and permanently sealed bearings that only last 1 year because they realized where they put it you can’t get grease to it. Just not a fan of JD. Compared to real industrial equipment they look like a 4th grader designed them for 3 graders.
Maybe a bad connection in the fusebox
Or come help .possibly wash all the crap of for mechanic etc .even a cuppa for him be nice
Warren, your video's are very informative and interesting, and I have enjoyed ememsely watching them. I also want to Thank You for your service to our country, I also like listing to your rantings. However your recent change to a members monthly subscription, I find that highly disagreeable, that is big corporate america type tactics which I know we both disasgree with, I would much rather donate to a few $'s to have the previledge of watching your videos. I not going to give Google UTube my credit card number so that they can take out monthly fees. NIX that idea,no, no, no, no. Abselutly not.
Aloha.........................
The work you do has your name on it so to speak, if you have someone working for you that screws-up your name is on it then your reputation gets a bad name so I understand your way of thinking
Warren 2024!!!!
Trouble with hiring good people to work for you is that if they are that good generally they are already working for themselves.
Clutch switch sticky?
Do the farmers allow guys to come shoot the squirrels? Used to be big sport but we don’t see it here anymore
Oh yes, they are everywhere in the spring.
Looks like you fixed the clutch. Send them a bill for $4000.
Only dishonest a-holes do shit like that. He isn't one of them.
With the labor short coming, it’s a possibility to put an apprentice on, train them up the way you want.
At least then there is no expectation for them to be competent.
If u r scared of dirt u better not be a mechanic
MAKE SURE YOU HIRE PEOPLE OVER 25YRS OLD NO KIDS 😅.
Why do you think that makes any difference? I've seen lots of a-holes over 25 years old. Work ethic and honesty is a part of how you were raised. It sure as hell doesn't change with age.
what about hiring a helping hand? grab tools and help carry heavy shit, you have time to bring your dogs and video your jobs, I do believe you have the ability to hire someone to help with everyday tasks, get rid of youtube if you have to, i enjoy your videos for sure, thats a fact. Unless youtube is paying you a ton of money, pay to hire a helping hand and make your jobs easier, to me that makes sense, digital world doesnt fix your tasks. Just my opinion, I am open to comments as its just my opinion. Hope everyone is having a great day
I guess you can't hear or just a d u m b a s s!
Too many want big wages for not much in skills. A helper, as you suggest, would spend most of their time watching and how can he justify paying for that? Then, if he took on an apprentice, he already talked about those pitfalls.
@@George-dy3pt thanks for that, i appreciate the response